RF240A4JCCADGA Equivalent & Substitute Parts

Part Overview

The RF240A4JCCADGA is a 2.4mm (APC-2.4, OS-50) coaxial connector jack with female socket configuration, designed for 50 Ohm RF applications. This panel mount, through-hole solder connector operates at frequencies up to 50 GHz and features a four-hole flange mounting configuration. The connector is manufactured by Bulgin and maintains Active product status with full RoHS3 compliance. Substitute parts are identified when equivalent electrical and mechanical parameters are required but alternative mounting hole configurations or inventory considerations necessitate component alternatives.

Substiute Parts

RF240A4JCCADGA

BulginIn Stock: 944RF240A4JCCADGA Datasheet

Current PartRFQ

RF240A2JEGADGA

BulginIn Stock: 1149RF240A2JEGADGA Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution between RF240A4JCCADGA and RF240A2JEGADGA is based on electrical and mechanical equivalence within the RF240 connector series. Both parts maintain identical specifications across all critical RF performance parameters: 2.4mm connector style, 50 Ohm impedance, 50 GHz maximum frequency, female socket jack configuration, panel mount through-hole solder termination, and flange mounting feature.

The primary distinction between these parts is the mounting hole configuration. RF240A4JCCADGA features a four-hole flange mount, while RF240A2JEGADGA features a two-hole flange mount. This difference affects only the mechanical fastening method and panel layout requirements, not the electrical performance or RF characteristics.

Both parts share identical material specifications (Beryllium Copper center contact, Stainless Steel body, Polyetherimide dielectric), operating temperature range (-40°C ~ 85°C), voltage rating (150 V), mating cycle rating (500), and compliance certifications (ROHS3 Compliant, MSL 1).

Parameter Comparison

Engineering Selection Recommendations

Selection between RF240A4JCCADGA and RF240A2JEGADGA is determined by panel mounting hole requirements. Both connectors are Active products with full ROHS3 compliance and identical electrical specifications.

RF240A4JCCADGA is specified when four-hole flange mounting is required for panel installation. This configuration provides additional mechanical stability through increased fastening points.

RF240A2JEGADGA is specified when two-hole flange mounting is required for panel installation. This configuration reduces panel hole requirements and fastening hardware.

Both parts maintain identical RF performance characteristics, material composition, temperature operating range, voltage rating, and compliance certifications. Selection is based solely on mechanical mounting hole configuration compatibility with the target panel or enclosure design.

Frequently Asked Questions (FAQ)

Q: Are RF240A4JCCADGA and RF240A2JEGADGA electrically interchangeable?

A: Yes. Both connectors maintain identical electrical specifications including 50 Ohm impedance, 50 GHz maximum frequency, female socket jack configuration, and solder termination. RF performance is equivalent across all parameters.

Q: What is the primary difference between these two connector models?

A: The primary difference is the flange mounting hole configuration. RF240A4JCCADGA features four mounting holes, while RF240A2JEGADGA features two mounting holes. This affects only the mechanical fastening method to the panel.

Q: Can RF240A2JEGADGA be used in an application designed for RF240A4JCCADGA?

A: Substitution is possible only if the target panel or enclosure can accommodate the two-hole flange configuration. The electrical and RF characteristics are identical, but the mechanical mounting interface differs.

Q: Can RF240A4JCCADGA be used in an application designed for RF240A2JEGADGA?

A: Substitution is possible only if the target panel or enclosure can accommodate the four-hole flange configuration. The electrical and RF characteristics are identical, but the mechanical mounting interface differs.

Q: Do both connectors operate across the same temperature range?

A: Yes. Both RF240A4JCCADGA and RF240A2JEGADGA operate across the identical temperature range of -40°C to 85°C.

Q: Are both connectors RoHS compliant?

A: Yes. Both RF240A4JCCADGA and RF240A2JEGADGA are ROHS3 Compliant with Moisture Sensitivity Level 1 (Unlimited).

Q: What materials are used in the center contact and body of both connectors?

A: Both connectors use Beryllium Copper for the center contact and Stainless Steel for the body, with Polyetherimide (PEI) as the dielectric material.

Q: What is the voltage rating for both connectors?

A: Both RF240A4JCCADGA and RF240A2JEGADGA have a voltage rating of 150 V.

Q: How many mating cycles are rated for both connectors?

A: Both connectors are rated for 500 mating cycles.