Equivalent & Substitute Parts Reference Page for REC15-2415S/H2

Part Overview

The REC15-2415S/H2 from Recom Power is an isolated DC-DC converter module, featuring a single 15V output at 1A, rated for up to 15W power. The converter accepts input voltages between 18V and 36V and provides 2 kV isolation. This model, part of the ECONOLINE REC15 (15W) series, is designed for ITE (Commercial) applications and includes features such as remote on/off and overcurrent/short circuit protection. The module is packaged in a through-hole 6-DIP form factor. This part is currently classified as Obsolete. Identifying alternative models is necessary to maintain continued availability in designs and inventories.

Substiute Parts

REC15-2415S/H2

Recom PowerIn Stock: 12249REC15-2415S/H2 Datasheet

Current PartRFQ

REC15-2415S/H2/M

Recom PowerIn Stock: 3014REC15-2415S/H2/M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is determined exclusively by matching the following allowed electrical and mechanical parameters: input voltage range (18V–36V), output voltage (15V), output current (1A), power rating (15W), isolation voltage (2kV), number of outputs (1), features (remote on/off, overcurrent protection (OCP), short circuit protection (SCP)), operating temperature (-40°C ~ 71°C), efficiency (86%), mounting type (through hole), package/case (6-DIP Module), dimensions, control features, RoHS compliance, moisture sensitivity level (MSL), REACH status, and product classification codes. Only parts explicit in the approved substitute list are considered based on these matching criteria.

Parameter Comparison

Engineering Selection Recommendations

REC15-2415S/H2 is classified as Obsolete and cannot be sourced for new or replacement designs. REC15-2415S/H2/M maintains identical electrical, mechanical, and compliance parameters, and is currently in Active production status. The substitute part is ROHS3 Compliant, REACH Unaffected, shares the same MSL rating, ECCN, and HTSUS codes. Selection conforms to engineering continuity for compliance and regulatory certifications within the specified category.

Frequently Asked Questions (FAQ)

Q1: What electrical parameters must match when substituting a DC-DC converter module?
A1: Input voltage range, output voltage, output current, power rating, isolation voltage, and number of outputs must be identical.

Q2: Are control features and mounting type relevant when selecting substitutes?
A2: Yes. Control features (such as enable, active high) and mounting type (through hole, 6-DIP Module) are mandatory for mechanical and interface compatibility.

Q3: Is package size and dimension required to match between original and substitute modules?
A3: Yes, the package/case and size/dimensions must be identical to ensure fit and form compatibility.

Q4: Does functional status or regulatory compliance affect substitute eligibility?
A4: Only parts with matching product status (Active for substitutes), RoHS compliance, REACH status, and identical classification codes are suitable for direct substitution.

Q5: Can the substitute REC15-2415S/H2/M be used interchangeably with the obsolete REC15-2415S/H2?
A5: REC15-2415S/H2/M matches all specified electrical, mechanical, and regulatory parameters provided in the input, and is listed as a direct substitute.