RE1206FRE07470RL Equivalent & Substitute Parts

Part Overview

The RE1206FRE07470RL is a 470 Ohms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by YAGEO. This component is classified as Active status and is widely used in general-purpose electronic applications requiring precision resistive elements. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling seamless integration into existing designs without circuit performance degradation.

Substiute Parts

RE1206FRE07470RL

YAGEOIn Stock: 1104RE1206FRE07470RL Datasheet

Current PartRFQ

CRCW1206470RFHEAP

Vishay DaleIn Stock: 5746CRCW1206470RFHEAP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RE1206FRE07470RL is determined by strict alignment of the following critical parameters:

• Resistance value: 470 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Package: 1206 (3216 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature coefficient: ±50ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match or wider range acceptable)
• RoHS compliance: ROHS3 Compliant (minimum requirement)
• Moisture sensitivity: MSL 1 (exact match required)

The CRCW1206470RFHEAP from Vishay Dale meets all substitution criteria and is classified as a manufacturer-recommended equivalent.

Parameter Comparison

Engineering Selection Recommendations

The CRCW1206470RFHEAP is a direct equivalent to the RE1206FRE07470RL based on matching electrical specifications, package dimensions, and compliance certifications. Both components are Active status products with ROHS3 compliance and REACH Unaffected status. The Vishay Dale substitute includes AEC-Q200 automotive qualification, which provides additional reliability assurance for applications requiring automotive-grade components. Dimensional variations (length 3.10mm vs 3.20mm, height 0.65mm vs 0.60mm) are within standard PCB layout tolerances for 1206 package footprints and do not impact functional compatibility.

Frequently Asked Questions (FAQ)

Q: Can CRCW1206470RFHEAP be used as a direct replacement for RE1206FRE07470RL?

A: Yes. Both components share identical electrical specifications (470 Ohms ±1%, 0.25W, ±50ppm/°C, -55°C ~ 155°C), identical package designation (1206), and equivalent compliance certifications (ROHS3, REACH Unaffected). Dimensional differences are within standard PCB layout tolerances.

Q: What is the significance of AEC-Q200 qualification on the substitute part?

A: AEC-Q200 is an automotive industry standard qualification. The CRCW1206470RFHEAP carries this certification, indicating enhanced reliability testing and quality assurance. This does not prevent use in non-automotive applications; it indicates a higher qualification level.

Q: Are there packaging differences between these parts?

A: The main part (RE1206FRE07470RL) is supplied in Tape & Reel (TR) packaging. The substitute (CRCW1206470RFHEAP) is supplied in Cut Tape (CT) & Digi-Reel® packaging. Both packaging formats are standard for SMD components and do not affect component performance or PCB assembly compatibility.

Q: Do the minor dimensional variations affect PCB layout?

A: No. The dimensional differences (length 3.10mm vs 3.20mm, height 0.65mm vs 0.60mm) are within standard manufacturing tolerances for 1206 package footprints. Standard 1206 PCB pads accommodate both components without layout modification.

Q: Are both components RoHS compliant?

A: Yes. Both RE1206FRE07470RL and CRCW1206470RFHEAP are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements.