RE1206FRE071KL Equivalent & Substitute Parts

Part Overview

The RE1206FRE071KL is a 1 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by YAGEO. This component is actively produced and widely used in general-purpose electronic applications requiring precision resistive elements. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling seamless integration into existing designs or addressing supply chain requirements.

Substiute Parts

RE1206FRE071KL

YAGEOIn Stock: 3728RE1206FRE071KL Datasheet

Current PartRFQ

CRCW12061K00FHEAP

Vishay DaleIn Stock: 25266CRCW12061K00FHEAP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RE1206FRE071KL is determined by strict alignment of the following parameters:

• Resistance Value: 1 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power Rating: 0.25W / 1/4W (exact match required)
• Package / Case: 1206 (3216 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±50ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• Number of Terminations: 2 (exact match required)
• RoHS Compliance: ROHS3 Compliant (minimum requirement)

The CRCW12061K00FHEAP from Vishay Dale meets all substitution criteria. This part maintains identical electrical specifications and package dimensions while offering additional automotive-grade qualification (AEC-Q200), making it suitable for applications requiring enhanced reliability standards.

Parameter Comparison

Engineering Selection Recommendations

Both the RE1206FRE071KL and CRCW12061K00FHEAP are active production components with full ROHS3 compliance and unlimited moisture sensitivity rating. Selection between these parts should be based on application requirements and supply availability:

• RE1206FRE071KL: Standard general-purpose applications with no automotive qualification requirement.
• CRCW12061K00FHEAP: Applications requiring automotive-grade reliability (AEC-Q200 qualified) or where enhanced component traceability is mandated.

Both parts are mechanically and electrically interchangeable within the specified parameter tolerances.

Frequently Asked Questions (FAQ)

Q: Can CRCW12061K00FHEAP be used as a direct replacement for RE1206FRE071KL?

A: Yes. Both parts share identical electrical specifications (1 kOhms ±1%, 0.25W), composition (thick film), package (1206), temperature coefficient (±50ppm/°C), and operating temperature range (-55°C ~ 155°C). The CRCW12061K00FHEAP includes additional AEC-Q200 automotive qualification, making it suitable for any application where RE1206FRE071KL is specified.

Q: Are there dimensional differences between these parts?

A: Minor dimensional variations exist within acceptable tolerances. RE1206FRE071KL has a maximum seated height of 0.026" (0.65mm) and length of 0.122" (3.10mm). CRCW12061K00FHEAP has a maximum seated height of 0.024" (0.60mm) and length of 0.126" (3.20mm). Both dimensions remain within the 1206 package specification and do not affect PCB layout or assembly compatibility.

Q: What is the significance of AEC-Q200 qualification on the CRCW12061K00FHEAP?

A: AEC-Q200 is an automotive industry standard qualification that certifies component reliability under automotive operating conditions. This qualification is not required for general-purpose applications but is mandatory for automotive and high-reliability applications. The presence of this qualification does not negatively impact use in non-automotive applications.

Q: Are both parts RoHS compliant?

A: Yes. Both RE1206FRE071KL and CRCW12061K00FHEAP are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: What packaging formats are available for these parts?

A: RE1206FRE071KL is supplied in Cut Tape (CT) & Digi-Reel format. CRCW12061K00FHEAP is supplied in Tape & Reel (TR) format. Packaging format selection depends on assembly process requirements and order quantities.