RE0805FRE0795K3L Equivalent & Substitute Parts

Part Overview

The RE0805FRE0795K3L is a 95.3 kOhms ±1% thick film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This component is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part maintains active product status and is ROHS3 compliant with MSL Level 1 rating. Substitute parts are identified when equivalent resistance values, package dimensions, and thermal specifications align within acceptable engineering tolerances for the application.

Substiute Parts

RE0805FRE0795K3L

YAGEOIn Stock: 964RE0805FRE0795K3L Datasheet

Current PartRFQ

ERJ-PB6B9532V

Panasonic Electronic ComponentsIn Stock: 1177ERJ-PB6B9532V Datasheet

MFR RecommendedRFQ

ERJ-PB6D9532V

Panasonic Electronic ComponentsIn Stock: 5922ERJ-PB6D9532V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE0795K3L are qualified based on the following criteria:

• Identical resistance value: 95.3 kOhms
• Identical package / case: 0805 (2012 Metric)
• Identical composition: Thick Film
• Identical temperature coefficient: ±50ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Identical RoHS compliance: ROHS3 Compliant
• Identical MSL rating: 1 (Unlimited)

The substitute parts identified are Panasonic ERJ-PB6 series resistors. These parts maintain all critical electrical and mechanical parameters. Variations in tolerance (±0.1% to ±0.5%) and power rating (0.25W / 1/4W) represent enhanced specifications that do not preclude substitution. The ERJ-PB6 series includes automotive AEC-Q200 qualification and pulse withstanding capability, which are additional features not present in the primary part.

Parameter Comparison

Engineering Selection Recommendations

Both Panasonic ERJ-PB6 series substitutes maintain active product status and full ROHS3 compliance. The ERJ-PB6B9532V offers tighter tolerance specification (±0.1%) compared to the primary part (±1%), with increased power rating (0.25W vs. 0.125W) and automotive AEC-Q200 qualification. The ERJ-PB6D9532V provides intermediate tolerance (±0.5%) with identical power and qualification features.

Selection between substitute parts depends on application requirements for tolerance precision and automotive qualification. Both substitutes are mechanically compatible within the 0805 package footprint, with maximum seated height of 0.028" (0.70mm) compared to the primary part's 0.024" (0.60mm). This height difference is within typical PCB assembly tolerances for 0805 components.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B9532V and ERJ-PB6D9532V be used interchangeably with RE0805FRE0795K3L?

A: Both Panasonic parts are electrically and mechanically compatible substitutes. The primary differences are tolerance grade (±0.1% and ±0.5% respectively versus ±1%) and power rating (0.25W versus 0.125W). These represent equal or enhanced specifications for the application.

Q: What is the impact of the 0.004" (0.10mm) height difference between the primary part and substitutes?

A: The seated height difference (0.024" vs. 0.028") is within standard PCB assembly tolerances for 0805 components and does not affect placement, soldering, or electrical performance in typical applications.

Q: Are the Panasonic substitutes suitable for automotive applications?

A: Both ERJ-PB6 series parts carry AEC-Q200 automotive qualification. The primary YAGEO part does not specify automotive qualification. Selection of Panasonic substitutes provides automotive-grade reliability if required by the application.

Q: Does tolerance difference affect circuit performance?

A: The primary part specifies ±1% tolerance. Panasonic substitutes offer ±0.1% (ERJ-PB6B9532V) or ±0.5% (ERJ-PB6D9532V) tolerance. Tighter tolerance provides improved circuit accuracy but does not preclude substitution if the application accepts ±1% tolerance.

Q: Are all three parts available in Tape & Reel packaging?

A: Yes. The primary part RE0805FRE0795K3L and both Panasonic substitutes (ERJ-PB6B9532V and ERJ-PB6D9532V) are supplied in Tape & Reel (TR) packaging suitable for automated assembly.