RE0805FRE07825RL Equivalent & Substitute Parts

Part Overview

The RE0805FRE07825RL is a 825 Ohms ±1% thick film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This surface mount device is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part is ROHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity rating. As an active product with 939 pieces in stock, equivalent and substitute parts may be required for design flexibility, supply chain optimization, or application-specific performance requirements.

Substiute Parts

RE0805FRE07825RL

YAGEOIn Stock: 973RE0805FRE07825RL Datasheet

Current PartRFQ

ERJ-PB6B8250V

Panasonic Electronic ComponentsIn Stock: 5545ERJ-PB6B8250V Datasheet

MFR RecommendedRFQ

ERJ-PB6D8250V

Panasonic Electronic ComponentsIn Stock: 13635ERJ-PB6D8250V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE07825RL must maintain the following core parameters to ensure direct compatibility:

• Resistance value: 825 Ohms
• Package / Case: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±50ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Substitutes may differ in tolerance (±0.1% to ±0.5%) and power rating (0.25W / 1/4W), provided these parameters meet or exceed the application requirements. The ERJ-PB series from Panasonic Electronic Components satisfies all core compatibility criteria while offering enhanced specifications including automotive AEC-Q200 qualification and pulse withstanding capability.

Parameter Comparison

Engineering Selection Recommendations

Both Panasonic ERJ-PB series substitutes (ERJ-PB6B8250V and ERJ-PB6D8250V) are qualified alternatives to the RE0805FRE07825RL. Selection between substitutes depends on application requirements:

ERJ-PB6B8250V provides the tightest tolerance specification at ±0.1%, suitable for precision circuit applications requiring minimal resistance variation. This part carries AEC-Q200 automotive qualification and pulse withstanding capability.

ERJ-PB6D8250V offers ±0.5% tolerance with identical automotive AEC-Q200 qualification and pulse withstanding features. This part provides a balance between tolerance performance and cost optimization.

Both substitutes feature doubled power rating (0.25W vs. 0.125W), providing thermal margin in applications where the original part operates near its power dissipation limit. All three parts maintain identical package dimensions, temperature coefficient, operating temperature range, and environmental compliance ratings (ROHS3, MSL Level 1).

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B8250V or ERJ-PB6D8250V be used as direct drop-in replacements for RE0805FRE07825RL?

A: Yes. Both Panasonic parts share identical package (0805), resistance value (825 Ohms), temperature coefficient (±50ppm/°C), operating temperature range (-55°C ~ 155°C), and environmental compliance (ROHS3, MSL Level 1). Physical dimensions and termination count are equivalent, enabling direct PCB substitution.

Q: What is the significance of the tolerance difference between ±1% and ±0.1% or ±0.5%?

A: Tolerance defines the maximum deviation of actual resistance from the nominal 825 Ohm value. The RE0805FRE07825RL allows ±8.25 Ohms variation, while ERJ-PB6B8250V limits variation to ±0.825 Ohms. ERJ-PB6D8250V allows ±4.125 Ohms variation. Tighter tolerance substitutes provide improved circuit accuracy without requiring design changes.

Q: Why do the Panasonic substitutes have higher power ratings (0.25W vs. 0.125W)?

A: Higher power rating indicates greater thermal capacity. The 0.25W rating provides additional thermal margin and may improve reliability in applications operating near the original part's power dissipation limit. This does not require circuit modification and represents an enhancement.

Q: Are the Panasonic substitutes suitable for automotive applications?

A: Yes. Both ERJ-PB6B8250V and ERJ-PB6D8250V carry AEC-Q200 automotive qualification and pulse withstanding capability, making them suitable for automotive and industrial applications requiring enhanced reliability standards.

Q: What is the height difference between the main part and substitutes?

A: RE0805FRE07825RL has a maximum seated height of 0.024" (0.60mm), while both Panasonic substitutes have a maximum seated height of 0.028" (0.70mm). This 0.004" (0.10mm) difference is within typical PCB assembly tolerances and does not affect component placement or board-level compatibility.