RE0805FRE07820RL Equivalent & Substitute Parts

Part Overview

The RE0805FRE07820RL is a 0805 (2012 Metric) thick film chip resistor manufactured by YAGEO with a resistance value of 820 Ohms and ±1% tolerance. Rated at 0.125W (1/8W) power dissipation, this component operates across the temperature range of -55°C to 155°C and is ROHS3 compliant with MSL 1 rating. The part is currently in active production status with 887 pieces available in stock. Substitute parts may be required due to design optimization, supply chain considerations, or application-specific performance requirements such as enhanced tolerance or higher power ratings.

Substiute Parts

RE0805FRE07820RL

YAGEOIn Stock: 949RE0805FRE07820RL Datasheet

Current PartRFQ

ERJ-PB6B8200V

Panasonic Electronic ComponentsIn Stock: 5199ERJ-PB6B8200V Datasheet

MFR RecommendedRFQ

ERJ-PB6D8200V

Panasonic Electronic ComponentsIn Stock: 5844ERJ-PB6D8200V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RE0805FRE07820RL is determined by maintaining electrical and mechanical compatibility across the following critical parameters:

• Resistance Value: Must be 820 Ohms (exact match required)
• Package / Case: Must be 0805 (2012 Metric) for PCB footprint compatibility
• Composition: Thick film technology maintained across all substitutes
• Operating Temperature Range: Must support -55°C ~ 155°C minimum
• Temperature Coefficient: ±50ppm/°C maintained
• Compliance: ROHS3 and REACH compliance required

The substitute parts identified are Panasonic ERJ-PB series resistors, which meet all mechanical and electrical compatibility requirements. These substitutes offer enhanced tolerance specifications (±0.1% and ±0.5%) and higher power ratings (0.25W / 1/4W) compared to the original part, providing design flexibility for applications requiring tighter tolerance or increased power dissipation capability.

Parameter Comparison

Engineering Selection Recommendations

Both Panasonic ERJ-PB series substitutes maintain full electrical and mechanical compatibility with the RE0805FRE07820RL. Selection between substitute options depends on application requirements:

ERJ-PB6B8200V provides the tightest tolerance specification at ±0.1%, suitable for precision analog circuits requiring minimal resistance variation. This part carries AEC-Q200 automotive qualification.

ERJ-PB6D8200V offers ±0.5% tolerance with equivalent AEC-Q200 automotive qualification. Both Panasonic substitutes provide doubled power dissipation capacity (0.25W versus 0.125W), enabling use in higher-power applications while maintaining the same 0805 package footprint.

All three parts maintain ROHS3 compliance, unlimited moisture sensitivity rating (MSL 1), and identical operating temperature ranges. Selection should be based on tolerance requirements and power dissipation needs specific to the application circuit.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B8200V and ERJ-PB6D8200V be used interchangeably with RE0805FRE07820RL?

A: Yes, both Panasonic parts are mechanically and electrically compatible. They share identical 0805 package dimensions, 820 Ohm resistance value, and operating temperature range. The primary differences are tolerance grade and power rating, which represent improvements over the original specification.

Q: What is the significance of the tolerance difference between ±1% and ±0.1%?

A: Tolerance defines the acceptable resistance variation from the nominal 820 Ohm value. The ±0.1% tolerance of ERJ-PB6B8200V provides tighter control (±0.82 Ohms maximum deviation) compared to ±1% (±8.2 Ohms maximum deviation). Selection depends on circuit sensitivity to resistance variation.

Q: Why do the Panasonic substitutes have higher power ratings?

A: The ERJ-PB6 series resistors are rated at 0.25W (1/4W) compared to the YAGEO RE0805FRE07820RL at 0.125W (1/8W). Both maintain identical 0805 package dimensions. Higher power rating provides design margin for applications with greater power dissipation requirements.

Q: Are the physical dimensions identical across all three parts?

A: Yes. All three resistors use the 0805 (2012 Metric) package with identical length (0.079" / 2.00mm) and width (0.049" / 1.25mm). Height differences are minimal (0.024" maximum for YAGEO versus 0.028" maximum for Panasonic), which do not affect PCB layout compatibility.

Q: Do all parts meet automotive qualification standards?

A: The YAGEO RE0805FRE07820RL does not specify AEC-Q200 rating. Both Panasonic substitutes (ERJ-PB6B8200V and ERJ-PB6D8200V) carry AEC-Q200 automotive qualification, making them suitable for automotive applications requiring this certification.

Q: What compliance certifications apply to all three parts?

A: All three resistors are ROHS3 compliant, REACH unaffected, and carry ECCN EAR99 classification. All maintain MSL 1 (unlimited) moisture sensitivity rating, indicating no special moisture protection requirements during storage or handling.