RE0805FRE07750KL Equivalent & Substitute Parts

Part Overview

The RE0805FRE07750KL is a 750 kOhms ±1% thick film chip resistor manufactured by YAGEO in 0805 (2012 Metric) package format. This component is actively produced and widely used in general-purpose electronic applications requiring standard tolerance resistive elements. Substitute parts are identified to provide design flexibility, supply chain alternatives, and enhanced performance options where application requirements permit.

Substiute Parts

RE0805FRE07750KL

YAGEOIn Stock: 1095RE0805FRE07750KL Datasheet

Current PartRFQ

ERJ-PB6B7503V

Panasonic Electronic ComponentsIn Stock: 5850ERJ-PB6B7503V Datasheet

MFR RecommendedRFQ

ERJ-PB6D7503V

Panasonic Electronic ComponentsIn Stock: 5423ERJ-PB6D7503V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE07750KL are qualified based on the following criteria:

• Identical resistance value: 750 kOhms
• Identical package format: 0805 (2012 Metric)
• Identical composition: Thick Film
• Identical temperature coefficient: ±50ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Identical RoHS3 compliance and MSL rating

Substitutes may vary in tolerance (±0.1% to ±0.5%) and power rating (0.25W maximum), provided the application does not require the original ±1% tolerance specification. All substitute parts are Panasonic ERJ-PB6 series components with AEC-Q200 automotive qualification.

Parameter Comparison

Engineering Selection Recommendations

Both Panasonic ERJ-PB6 series substitutes maintain full electrical and mechanical compatibility with the RE0805FRE07750KL within the specified parameter constraints. Selection between substitute options depends on application-specific tolerance and power dissipation requirements:

• ERJ-PB6B7503V provides superior tolerance performance (±0.1%) and increased power rating (0.25W) with AEC-Q200 automotive qualification.
• ERJ-PB6D7503V offers intermediate tolerance (±0.5%) and increased power rating (0.25W) with AEC-Q200 automotive qualification.

All parts maintain identical thermal characteristics, temperature operating range, and regulatory compliance status. Physical dimensions remain compatible across all three options within the 0805 package specification.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B7503V or ERJ-PB6D7503V be used as direct replacements for RE0805FRE07750KL?

A: Yes, both Panasonic parts are direct substitutes. They share identical resistance value, package format, composition, temperature coefficient, and operating temperature range. Tolerance and power rating differences are improvements over the original specification.

Q: What is the primary difference between the two Panasonic substitutes?

A: ERJ-PB6B7503V provides ±0.1% tolerance, while ERJ-PB6D7503V provides ±0.5% tolerance. Both offer 0.25W power rating compared to the original 0.125W rating. Selection depends on circuit tolerance requirements.

Q: Are there physical dimension differences between these parts?

A: All three parts conform to the 0805 (2012 Metric) package standard. Maximum seated height varies slightly: RE0805FRE07750KL at 0.024" (0.60mm) and both Panasonic parts at 0.028" (0.70mm). This difference remains within standard PCB assembly tolerances.

Q: Do the substitute parts carry automotive qualification?

A: Both Panasonic ERJ-PB6 series parts carry AEC-Q200 automotive qualification. The original YAGEO part does not specify this rating.

Q: Are all parts RoHS3 compliant?

A: Yes, all three parts are ROHS3 compliant with MSL rating of 1 (Unlimited moisture sensitivity level).