RE0805FRE0768K1L Equivalent & Substitute Parts

Part Overview

The RE0805FRE0768K1L is a 68.1 kOhms ±1% thick film chip resistor in 0805 (2012 Metric) package rated at 0.125W (1/8W) power dissipation. Manufactured by YAGEO under the RE series, this component is actively produced and ROHS3 compliant. Substitute parts are identified based on matching resistance value, package form factor, and operating temperature range while accommodating variations in tolerance and power rating within acceptable electrical and mechanical parameters.

Substiute Parts

RE0805FRE0768K1L

YAGEOIn Stock: 699RE0805FRE0768K1L Datasheet

Current PartRFQ

ERJ-PB6B6812V

Panasonic Electronic ComponentsIn Stock: 1157ERJ-PB6B6812V Datasheet

MFR RecommendedRFQ

ERJ-PB6D6812V

Panasonic Electronic ComponentsIn Stock: 5075ERJ-PB6D6812V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE0768K1L are qualified based on the following criteria:

Mandatory Matching Parameters:

• Resistance value: 68.1 kOhms (exact match)
• Package / Case: 0805 (2012 Metric) (exact match)
• Composition: Thick Film (exact match)
• Operating Temperature Range: -55°C ~ 155°C (exact match)
• Temperature Coefficient: ±50ppm/°C (exact match)

Allowable Variations:

• Tolerance: May be tighter (lower value) than ±1%
• Power Rating: May be equal to or greater than 0.125W
• Manufacturer: Different manufacturer acceptable if all mandatory parameters match
• Certifications: Additional certifications (such as AEC-Q200) are acceptable

The identified substitutes ERJ-PB6B6812V and ERJ-PB6D6812V from Panasonic Electronic Components meet all mandatory matching criteria while offering improved tolerance specifications and higher power ratings.

Parameter Comparison

Engineering Selection Recommendations

Both ERJ-PB6B6812V and ERJ-PB6D6812V are direct substitutes for RE0805FRE0768K1L based on electrical and mechanical compatibility. Selection between alternatives depends on application requirements:

ERJ-PB6B6812V (±0.1% Tolerance): Suitable for applications requiring tighter tolerance control. The ±0.1% tolerance specification provides superior accuracy compared to the original ±1% specification. AEC-Q200 automotive qualification is available if required for automotive applications.

ERJ-PB6D6812V (±0.5% Tolerance): Suitable for general applications where moderate tolerance is acceptable. The ±0.5% tolerance provides a balance between cost and accuracy. AEC-Q200 automotive qualification is available if required for automotive applications.

Both substitutes feature 0.25W (1/4W) power rating, which exceeds the original 0.125W (1/8W) specification, providing additional thermal margin in the same physical package. All three parts maintain identical operating temperature range, temperature coefficient, and moisture sensitivity characteristics.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B6812V or ERJ-PB6D6812V be used as direct replacements for RE0805FRE0768K1L?

A: Yes. Both Panasonic parts are direct substitutes. They match the mandatory parameters: 68.1 kOhms resistance, 0805 package, thick film composition, -55°C to 155°C operating range, and ±50ppm/°C temperature coefficient. The tighter tolerance and higher power rating of the substitutes are compatible with applications designed for the original part.

Q: What is the difference between ERJ-PB6B6812V and ERJ-PB6D6812V?

A: The primary difference is tolerance specification. ERJ-PB6B6812V offers ±0.1% tolerance, while ERJ-PB6D6812V offers ±0.5% tolerance. Both share identical resistance value, package, power rating, operating temperature, and temperature coefficient. Selection depends on the tolerance requirement of the specific application.

Q: Are the physical dimensions compatible?

A: Yes. All three parts use the 0805 (2012 Metric) package with identical length (0.079" / 2.00mm) and width (0.049" / 1.25mm). Height differences are minimal (RE0805FRE0768K1L: 0.024" maximum; ERJ-PB6 series: 0.028" maximum) and do not affect PCB layout compatibility.

Q: Do the substitute parts have additional certifications?

A: Yes. Both ERJ-PB6B6812V and ERJ-PB6D6812V carry AEC-Q200 automotive qualification. This certification is an additional feature and does not restrict use in non-automotive applications.

Q: Are all parts ROHS3 compliant?

A: Yes. RE0805FRE0768K1L, ERJ-PB6B6812V, and ERJ-PB6D6812V are all ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity level.