RE0805FRE07560RL Equivalent & Substitute Parts

Part Overview

The RE0805FRE07560RL is a 560 Ohms ±1% thick film chip resistor manufactured by YAGEO in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part maintains active product status and is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1). Substitute parts are identified when equivalent resistance values, package dimensions, and thermal specifications align within acceptable tolerance and power rating parameters.

Substiute Parts

RE0805FRE07560RL

YAGEOIn Stock: 1180RE0805FRE07560RL Datasheet

Current PartRFQ

ERJ-PB6B5600V

Panasonic Electronic ComponentsIn Stock: 4926ERJ-PB6B5600V Datasheet

MFR RecommendedRFQ

ERJ-PB6D5600V

Panasonic Electronic ComponentsIn Stock: 8055ERJ-PB6D5600V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE07560RL are qualified based on the following criteria:

• Identical resistance value: 560 Ohms
• Identical package format: 0805 (2012 Metric)
• Identical composition: Thick Film
• Identical temperature coefficient: ±50ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Identical RoHS3 compliance status
• Identical MSL rating: 1 (Unlimited)

Substitute parts may exceed the original power rating (0.125W minimum) and may feature tighter tolerance specifications (±0.1% or ±0.5% versus ±1%). Additional certifications such as AEC-Q200 automotive qualification do not disqualify substitution but represent enhanced specifications.

Parameter Comparison

Engineering Selection Recommendations

Both Panasonic ERJ-PB6 series substitutes (ERJ-PB6B5600V and ERJ-PB6D5600V) are functionally equivalent to the RE0805FRE07560RL for applications requiring 560 Ohms resistance in 0805 package format. All three parts maintain identical compliance certifications (ROHS3, REACH Unaffected) and identical environmental ratings.

The ERJ-PB6B5600V offers the tightest tolerance specification at ±0.1% and is qualified to AEC-Q200 automotive standards. The ERJ-PB6D5600V provides ±0.5% tolerance with identical AEC-Q200 qualification. Both Panasonic parts feature doubled power rating capacity (0.25W versus 0.125W) and marginally increased seated height (0.028" versus 0.024"), which remains within standard PCB assembly tolerances for 0805 components.

Selection between substitutes depends on application tolerance requirements and automotive qualification necessity. All parts are active products with confirmed inventory availability.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B5600V or ERJ-PB6D5600V be used as direct replacements for RE0805FRE07560RL?

A: Yes. Both Panasonic parts share identical resistance value, package format, composition, temperature coefficient, and operating temperature range. The increased power rating and tighter tolerance specifications of the Panasonic parts do not prevent substitution in circuits designed for the original YAGEO component.

Q: What is the difference between ERJ-PB6B5600V and ERJ-PB6D5600V?

A: The primary difference is tolerance specification. ERJ-PB6B5600V is rated ±0.1% tolerance, while ERJ-PB6D5600V is rated ±0.5% tolerance. Both share identical power rating (0.25W), package dimensions, and AEC-Q200 automotive qualification.

Q: Will the increased height of Panasonic substitutes (0.028" versus 0.024") cause PCB assembly issues?

A: No. The 0.004" (0.10mm) height difference is within standard PCB assembly tolerances for 0805 components and does not affect reflow soldering, component placement, or clearance specifications.

Q: Are the Panasonic substitutes suitable for automotive applications?

A: Yes. Both ERJ-PB6B5600V and ERJ-PB6D5600V carry AEC-Q200 automotive qualification. The original RE0805FRE07560RL does not specify automotive qualification.

Q: Can I use a substitute with higher power rating in a circuit designed for 0.125W?

A: Yes. The 0.25W power rating of the Panasonic substitutes exceeds the original specification and provides additional thermal margin. This does not create compatibility issues in circuits operating within the original power budget.