RE0805FRE07511KL Equivalent & Substitute Parts

Part Overview

The RE0805FRE07511KL is a 511 kOhms ±1% thick film chip resistor manufactured by YAGEO in the 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part maintains Active product status and is ROHS3 compliant with MSL Level 1 (Unlimited moisture sensitivity).

Equivalent and substitute parts are identified when designs require alternative sourcing due to inventory constraints, supply chain considerations, or when enhanced specifications such as improved tolerance or higher power ratings provide operational advantages within the same package footprint and electrical parameters.

Substiute Parts

RE0805FRE07511KL

YAGEOIn Stock: 903RE0805FRE07511KL Datasheet

Current PartRFQ

ERJ-PB6B5113V

Panasonic Electronic ComponentsIn Stock: 9417ERJ-PB6B5113V Datasheet

MFR RecommendedRFQ

ERJ-PB6D5113V

Panasonic Electronic ComponentsIn Stock: 12918ERJ-PB6D5113V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE07511KL are qualified based on the following criteria:

Mandatory Matching Parameters:

• Resistance value: 511 kOhms
• Package / Case: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±50ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variations:

• Tolerance: May be equal to or tighter than ±1%
• Power Rating: May be equal to or greater than 0.125W (1/8W)
• Manufacturer: Different manufacturer acceptable if all parameters match

The identified substitute parts from Panasonic Electronic Components (ERJ-PB series) meet all mandatory parameters while offering enhanced specifications in tolerance and power rating, maintaining full compatibility within the same physical footprint and thermal characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both Panasonic ERJ-PB series substitutes maintain full electrical and mechanical compatibility with the RE0805FRE07511KL. Selection between alternatives depends on application-specific requirements:

ERJ-PB6B5113V provides the tightest tolerance specification at ±0.1%, suitable for precision analog circuits requiring enhanced accuracy. This part carries AEC-Q200 automotive qualification.

ERJ-PB6D5113V offers a mid-range tolerance of ±0.5% with identical AEC-Q200 automotive qualification. This part provides a balance between tolerance performance and general-purpose applications.

Both substitute parts feature doubled power rating capacity (0.25W versus 0.125W) and slightly increased seated height (0.028" versus 0.024"), which must be verified against PCB layout constraints. All three parts maintain identical thermal characteristics, temperature coefficient, and compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B5113V or ERJ-PB6D5113V be used as direct replacements for RE0805FRE07511KL?

A: Yes. Both Panasonic parts are direct substitutes. They share identical resistance value, package footprint, composition, temperature range, and compliance status. The increased seated height (0.028" versus 0.024") must be confirmed against PCB clearance requirements.

Q: What is the difference between ERJ-PB6B5113V and ERJ-PB6D5113V?

A: The primary difference is tolerance specification. ERJ-PB6B5113V provides ±0.1% tolerance, while ERJ-PB6D5113V provides ±0.5% tolerance. Both share identical power rating (0.25W), package dimensions, and AEC-Q200 automotive qualification.

Q: Why do the substitute parts have higher power ratings?

A: The Panasonic ERJ-PB series components are rated for 0.25W (1/4W) compared to the YAGEO RE0805FRE07511KL at 0.125W (1/8W). This enhanced rating provides additional thermal margin and does not affect compatibility. The application power dissipation requirement determines whether this increased capacity is utilized.

Q: Are there any height considerations for PCB assembly?

A: The substitute parts have a maximum seated height of 0.028" (0.70mm) compared to 0.024" (0.60mm) for the original part. This 0.004" (0.10mm) difference must be verified against PCB layout, solder mask clearances, and component placement constraints.

Q: Do the substitute parts meet the same compliance requirements?

A: Yes. All three parts are ROHS3 compliant, REACH unaffected, and carry MSL Level 1 (Unlimited) moisture sensitivity rating. The Panasonic substitutes additionally carry AEC-Q200 automotive qualification.