RE0805FRE07464RL Equivalent & Substitute Parts

Part Overview

The RE0805FRE07464RL is a 464 Ohms ±1% thick film chip resistor manufactured by YAGEO in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part maintains Active product status and is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1). Substitute parts are identified when equivalent resistance values, package dimensions, and thermal operating ranges align with application requirements while potentially offering improved tolerance, power rating, or automotive qualification.

Substiute Parts

RE0805FRE07464RL

YAGEOIn Stock: 1167RE0805FRE07464RL Datasheet

Current PartRFQ

ERJ-PB6B4640V

Panasonic Electronic ComponentsIn Stock: 4961ERJ-PB6B4640V Datasheet

MFR RecommendedRFQ

ERJ-PB6D4640V

Panasonic Electronic ComponentsIn Stock: 15564ERJ-PB6D4640V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE07464RL are qualified based on the following criteria:

• Identical resistance value: 464 Ohms
• Identical package format: 0805 (2012 Metric)
• Identical composition: Thick Film
• Identical temperature coefficient: ±50ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Identical RoHS compliance: ROHS3 Compliant
• Identical MSL rating: 1 (Unlimited)

Substitute parts may differ in tolerance specification and power rating, provided these parameters meet or exceed the original part's requirements. The identified substitutes are Panasonic ERJ-PB series resistors, which maintain all core electrical and mechanical compatibility parameters while offering enhanced specifications in tolerance and power dissipation.

Parameter Comparison

Engineering Selection Recommendations

Both Panasonic ERJ-PB series substitutes maintain full electrical and mechanical compatibility with the RE0805FRE07464RL. The ERJ-PB6B4640V offers superior tolerance specification (±0.1%) and doubled power rating (0.25W), while the ERJ-PB6D4640V provides improved tolerance (±0.5%) and equivalent power rating increase. Both substitutes carry AEC-Q200 automotive qualification and ROHS3 compliance, matching the original part's regulatory status. The increased seated height (0.028" versus 0.024") must be verified against PCB layout constraints. Selection between substitutes depends on tolerance and power dissipation requirements specific to the application circuit.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B4640V and ERJ-PB6D4640V be used interchangeably with RE0805FRE07464RL?

A: Yes, both Panasonic parts are electrically and mechanically compatible. They share identical resistance value, package format, temperature coefficient, and operating temperature range. Tolerance and power rating differences must be evaluated against circuit requirements.

Q: What is the significance of the tolerance difference between ±1% and ±0.1%?

A: Tolerance specifies the maximum deviation from the nominal resistance value. The ERJ-PB6B4640V (±0.1%) provides tighter resistance accuracy compared to the RE0805FRE07464RL (±1%), beneficial for precision analog circuits. The ERJ-PB6D4640V (±0.5%) offers intermediate tolerance.

Q: Does the increased power rating of substitute parts affect circuit performance?

A: The substitute parts are rated for 0.25W (1/4W) versus the original 0.125W (1/8W). Higher power rating indicates greater thermal dissipation capability and does not negatively affect circuit operation when the original power requirement is 0.125W or less.

Q: Are there PCB layout considerations when substituting these parts?

A: The substitute parts have a maximum seated height of 0.028" compared to 0.024" for the original part. Verify that PCB clearance and component placement accommodate this 0.004" height difference.

Q: What does AEC-Q200 qualification mean?

A: AEC-Q200 is an automotive industry standard qualification for passive components. Both Panasonic substitutes meet this automotive-grade specification, indicating enhanced reliability testing and performance validation for automotive applications.