RE0805FRE07383RL Equivalent & Substitute Parts

Part Overview

The RE0805FRE07383RL is a 383 Ohms ±1% thick film chip resistor manufactured by YAGEO in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part maintains Active product status and is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1). Substitute parts are identified when equivalent resistance values, package dimensions, and thermal specifications align within acceptable engineering tolerances for the 0805 form factor.

Substiute Parts

RE0805FRE07383RL

YAGEOIn Stock: 1108RE0805FRE07383RL Datasheet

Current PartRFQ

ERJ-PB6B3830V

Panasonic Electronic ComponentsIn Stock: 3639ERJ-PB6B3830V Datasheet

MFR RecommendedRFQ

ERJ-PB6D3830V

Panasonic Electronic ComponentsIn Stock: 6038ERJ-PB6D3830V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE07383RL are qualified based on the following criteria:

• Identical resistance value: 383 Ohms
• Identical package format: 0805 (2012 Metric)
• Identical composition: Thick Film
• Identical temperature coefficient: ±50ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Identical RoHS compliance: ROHS3 Compliant
• Identical MSL rating: 1 (Unlimited)

Substitute parts may differ in tolerance specification and power rating, provided these parameters meet or exceed the requirements of the original part. The identified substitutes are manufactured by Panasonic Electronic Components under the ERJ-PB6 series.

Parameter Comparison

Engineering Selection Recommendations

Both Panasonic ERJ-PB6 series substitutes maintain Active product status and ROHS3 compliance. The ERJ-PB6B3830V and ERJ-PB6D3830V offer increased power dissipation capacity (0.25W versus 0.125W) and tighter tolerance specifications (±0.1% and ±0.5% respectively versus ±1%). Both substitutes include AEC-Q200 automotive qualification and pulse withstanding capability. Height variation between the original part (0.60mm seated) and substitutes (0.70mm seated) must be evaluated for PCB layout constraints. Selection between ERJ-PB6B3830V and ERJ-PB6D3830V depends on tolerance requirements: ERJ-PB6B3830V for applications requiring ±0.1% precision, or ERJ-PB6D3830V for applications requiring ±0.5% tolerance.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B3830V and ERJ-PB6D3830V be used interchangeably with RE0805FRE07383RL?

A: Both Panasonic parts are electrically compatible substitutes. They share identical resistance value, package format, composition, temperature coefficient, and operating temperature range. The primary differences are tolerance specification and power rating, both of which are improved in the substitutes.

Q: What is the significance of the height difference between the original part and substitutes?

A: The RE0805FRE07383RL has a maximum seated height of 0.60mm, while both Panasonic substitutes have a maximum seated height of 0.70mm. This 0.10mm difference must be evaluated against PCB design clearances and assembly process specifications.

Q: Why do the Panasonic substitutes have AEC-Q200 ratings?

A: AEC-Q200 is an automotive qualification standard. The Panasonic ERJ-PB6 series includes this certification, which is not specified for the YAGEO RE0805FRE07383RL. This certification is an additional feature and does not affect substitution compatibility for non-automotive applications.

Q: Which substitute should be selected for precision-critical applications?

A: The ERJ-PB6B3830V with ±0.1% tolerance is appropriate for applications requiring tighter tolerance control compared to the original ±1% specification.

Q: Are there any packaging or supply chain considerations?

A: All parts are supplied in Tape & Reel (TR) format. Inventory availability should be confirmed with the component supplier, as stock levels vary.