RE0805FRE07383KL Equivalent & Substitute Parts

Part Overview

The RE0805FRE07383KL is a 383 kOhms ±1% thick film chip resistor manufactured by YAGEO in 0805 (2012 Metric) package format. This surface mount device is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The component is ROHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity rating. As an active product with 677 pieces in stock, substitute parts may be required for design optimization, supply chain flexibility, or enhanced performance specifications in specific applications.

Substiute Parts

RE0805FRE07383KL

YAGEOIn Stock: 765RE0805FRE07383KL Datasheet

Current PartRFQ

ERJ-PB6B3833V

Panasonic Electronic ComponentsIn Stock: 5727ERJ-PB6B3833V Datasheet

MFR RecommendedRFQ

ERJ-PB6D3833V

Panasonic Electronic ComponentsIn Stock: 5826ERJ-PB6D3833V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE07383KL must maintain electrical and mechanical compatibility based on the following criteria:

Mandatory Parameters (No Deviation Allowed):

• Resistance value: 383 kOhms
• Package / Case: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±50ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variations:

• Tolerance: May be tighter (lower) than ±1%
• Power Rating: May be equal to or higher than 0.125W (1/8W)
• Manufacturer: Different manufacturer acceptable if all mandatory parameters match

The two substitute parts listed (ERJ-PB6B3833V and ERJ-PB6D3833V) both meet these criteria with enhanced power ratings (0.25W / 1/4W) and tighter tolerances (±0.1% and ±0.5% respectively), while maintaining identical resistance, package, and temperature specifications.

Parameter Comparison

Engineering Selection Recommendations

Both Panasonic ERJ-PB6 series substitutes are qualified for automotive applications under AEC-Q200 standard with pulse withstanding capability. The ERJ-PB6B3833V offers the tightest tolerance specification at ±0.1%, suitable for precision circuit applications requiring minimal resistance variation. The ERJ-PB6D3833V provides a mid-range tolerance of ±0.5% with equivalent power rating and automotive qualification.

All three parts maintain identical resistance value, package dimensions, temperature coefficient, and operating temperature range. The substitute parts feature increased power dissipation capability (0.25W versus 0.125W) and enhanced tolerance specifications, making them suitable for direct replacement in applications where the original RE0805FRE07383KL is specified. Physical height variation (0.028" maximum for substitutes versus 0.024" for the original) must be evaluated for PCB clearance in space-constrained designs.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B3833V or ERJ-PB6D3833V be used as direct replacements for RE0805FRE07383KL?

A: Yes. Both Panasonic parts maintain identical resistance value (383 kOhms), package format (0805), composition (thick film), temperature coefficient (±50ppm/°C), and operating temperature range (-55°C to 155°C). The substitute parts feature enhanced specifications with higher power ratings and tighter tolerances, making them electrically and mechanically compatible for direct substitution.

Q: What is the difference between ERJ-PB6B3833V and ERJ-PB6D3833V?

A: The primary difference is tolerance specification. ERJ-PB6B3833V is rated at ±0.1% tolerance, while ERJ-PB6D3833V is rated at ±0.5% tolerance. Both share identical power rating (0.25W), package format, and automotive AEC-Q200 qualification. Selection depends on circuit precision requirements.

Q: Are there physical compatibility concerns when substituting these parts?

A: The substitute parts have a maximum seated height of 0.028" (0.70mm) compared to 0.024" (0.60mm) for the original RE0805FRE07383KL. This 0.004" (0.10mm) height difference must be evaluated for PCB clearance, particularly in designs with tight vertical spacing or component stacking requirements. Planar dimensions remain identical at 0.079" L x 0.049" W (2.00mm x 1.25mm).

Q: Do the substitute parts meet the same compliance standards?

A: Yes. All three parts are ROHS3 compliant, carry MSL Level 1 (Unlimited) moisture sensitivity rating, and maintain REACH Unaffected status. The Panasonic substitutes additionally carry AEC-Q200 automotive qualification and pulse withstanding capability.

Q: Which substitute part should be selected for precision applications?

A: ERJ-PB6B3833V with ±0.1% tolerance is recommended for applications requiring minimal resistance variation and tighter circuit performance specifications. ERJ-PB6D3833V with ±0.5% tolerance is suitable for general-purpose applications where moderate tolerance is acceptable.