RE0805FRE07332RL Equivalent & Substitute Parts

Part Overview

The RE0805FRE07332RL is a 332 Ohm thick film chip resistor manufactured by YAGEO in the 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation with ±1% tolerance and operates across the temperature range of -55°C to 155°C. The part maintains Active product status and is ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Substitute parts are identified when equivalent resistance values, package formats, and operating temperature ranges align with the original specification, while allowing for variations in tolerance, power rating, and automotive qualification where applicable.

Substiute Parts

RE0805FRE07332RL

YAGEOIn Stock: 968RE0805FRE07332RL Datasheet

Current PartRFQ

ERJ-PB6B3320V

Panasonic Electronic ComponentsIn Stock: 2354ERJ-PB6B3320V Datasheet

MFR RecommendedRFQ

ERJ-PB6D3320V

Panasonic Electronic ComponentsIn Stock: 20775ERJ-PB6D3320V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RE0805FRE07332RL is determined by the following critical parameters:

• Resistance value must equal 332 Ohms
• Package format must be 0805 (2012 Metric)
• Operating temperature range must encompass -55°C to 155°C
• Composition must be Thick Film
• Temperature coefficient must be ±50ppm/°C or better
• RoHS3 compliance and MSL 1 rating must be maintained

The identified substitute parts meet these core requirements. Variations in tolerance (±0.1% to ±0.5%), power rating (0.25W vs. 0.125W), and automotive qualification (AEC-Q200) represent enhanced or specialized versions suitable for applications requiring tighter specifications or automotive-grade reliability.

Parameter Comparison

Engineering Selection Recommendations

Both Panasonic ERJ-PB6 series substitutes maintain Active product status and full ROHS3 compliance. The ERJ-PB6B3320V offers ±0.1% tolerance with AEC-Q200 automotive qualification, suitable for precision applications requiring tighter resistance tolerances. The ERJ-PB6D3320V provides ±0.5% tolerance with identical automotive qualification and represents the highest inventory availability among substitute options.

Both substitutes feature 0.25W power rating, providing 2x the power dissipation capacity of the original part while maintaining identical package dimensions and thermal operating range. Height variation (0.028" vs. 0.024" maximum seated height) remains within typical PCB assembly tolerances for 0805 components.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B3320V or ERJ-PB6D3320V be used as direct replacements for RE0805FRE07332RL?

A: Yes. Both parts share identical resistance value (332 Ohms), package format (0805), operating temperature range (-55°C to 155°C), and thermal coefficient (±50ppm/°C). The higher power rating (0.25W vs. 0.125W) and tighter tolerances represent functional improvements rather than incompatibilities.

Q: What is the significance of the ±0.1% and ±0.5% tolerance differences?

A: The original RE0805FRE07332RL specifies ±1% tolerance. The ERJ-PB6B3320V (±0.1%) and ERJ-PB6D3320V (±0.5%) offer tighter tolerance bands, reducing resistance variation in precision circuits. Applications with loose tolerance requirements can use either substitute without circuit performance impact.

Q: Does AEC-Q200 automotive qualification affect non-automotive applications?

A: AEC-Q200 qualification indicates enhanced reliability testing and quality assurance. Non-automotive applications benefit from this certification through improved component consistency and failure rate documentation, though it is not required for general industrial or consumer use.

Q: Are there physical compatibility concerns with the height difference?

A: The maximum seated height difference (0.028" for substitutes vs. 0.024" for original) is 0.004" (0.10mm). This variation falls within standard PCB assembly tolerances and does not affect reflow soldering, wave soldering, or mechanical clearance in typical 0805 applications.

Q: Which substitute should be selected for inventory or cost optimization?

A: ERJ-PB6D3320V offers the highest inventory availability (20,755 pcs) with ±0.5% tolerance suitable for most applications. ERJ-PB6B3320V is selected when ±0.1% precision is required. Both maintain identical compliance and thermal performance.