RE0805FRE07267KL Equivalent & Substitute Parts

Part Overview

The RE0805FRE07267KL is a 267 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This component is actively produced and widely used in general-purpose electronic applications requiring standard tolerance resistive elements. Substitute parts are identified based on matching resistance value, package form factor, and electrical performance within acceptable parameter ranges for this resistor category.

Substiute Parts

RE0805FRE07267KL

YAGEOIn Stock: 1249RE0805FRE07267KL Datasheet

Current PartRFQ

ERJ-PB6B2673V

Panasonic Electronic ComponentsIn Stock: 5055ERJ-PB6B2673V Datasheet

MFR RecommendedRFQ

ERJ-PB6D2673V

Panasonic Electronic ComponentsIn Stock: 5183ERJ-PB6D2673V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE07267KL are qualified based on the following criteria:

• Identical resistance value: 267 kOhms
• Identical package form factor: 0805 (2012 Metric)
• Identical composition: Thick Film
• Identical temperature coefficient: ±50ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Identical RoHS3 compliance status
• Identical MSL rating: 1 (Unlimited)

The substitute parts identified are manufactured by Panasonic Electronic Components (ERJ-PB series). These parts exceed the electrical specifications of the main part through improved tolerance ratings (±0.1% and ±0.5% versus ±1%) and higher power ratings (0.25W versus 0.125W), while maintaining full compatibility with the original package and thermal characteristics. Both substitute parts carry AEC-Q200 automotive qualification, providing additional reliability assurance.

Parameter Comparison

Engineering Selection Recommendations

Both Panasonic ERJ-PB series substitutes are directly compatible with the RE0805FRE07267KL in terms of package geometry, thermal performance, and environmental compliance. The ERJ-PB6B2673V offers the tightest tolerance specification (±0.1%) and is suitable for applications requiring enhanced precision. The ERJ-PB6D2673V provides a mid-range tolerance (±0.5%) with equivalent power handling capability. Both substitute parts feature AEC-Q200 automotive qualification, indicating compliance with automotive reliability standards. The increased power rating (0.25W versus 0.125W) in both substitutes provides additional thermal margin in circuit operation. All three parts maintain identical RoHS3 compliance and unlimited moisture sensitivity classification, ensuring regulatory and environmental compatibility across applications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B2673V or ERJ-PB6D2673V be used as direct replacements for RE0805FRE07267KL?

A: Yes. Both Panasonic parts are direct substitutes. They share identical resistance value, package form factor, composition, temperature coefficient, and operating temperature range. The improved tolerance and higher power rating of the substitutes do not create compatibility issues in circuits designed for the original part.

Q: What is the difference between ERJ-PB6B2673V and ERJ-PB6D2673V?

A: The primary difference is tolerance specification. ERJ-PB6B2673V provides ±0.1% tolerance, while ERJ-PB6D2673V provides ±0.5% tolerance. Both share identical 0.25W power rating, package dimensions, and AEC-Q200 qualification. Selection between these two depends on circuit tolerance requirements.

Q: Are there any physical dimension differences between the main part and substitutes?

A: The length and width dimensions are identical (0.079" L x 0.049" W / 2.00mm x 1.25mm). The maximum seated height differs slightly: RE0805FRE07267KL is 0.024" (0.60mm), while both Panasonic substitutes are 0.028" (0.70mm). This minor difference does not affect PCB layout compatibility for standard 0805 package applications.

Q: Do the substitute parts carry any additional certifications?

A: Yes. Both ERJ-PB6B2673V and ERJ-PB6D2673V carry AEC-Q200 automotive qualification, indicating compliance with automotive reliability and quality standards. The main part does not specify this certification.

Q: Can these parts be used interchangeably in the same circuit?

A: Yes. All three parts meet the same package, thermal, and environmental requirements. Circuit design considerations should focus on whether the tolerance specification (±1%, ±0.5%, or ±0.1%) meets application requirements. The higher power rating of the substitutes provides additional thermal headroom without creating compatibility issues.