RE0805FRE0724KL Equivalent & Substitute Parts

Part Overview

The RE0805FRE0724KL is a 24 kOhms ±1% thick film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This component is actively produced and widely used in general-purpose electronic applications requiring standard tolerance resistive elements. Equivalent and substitute parts are identified when design requirements permit tolerance relaxation, power rating upgrades, or when alternative qualified manufacturers are preferred for supply chain optimization.

Substiute Parts

RE0805FRE0724KL

YAGEOIn Stock: 831RE0805FRE0724KL Datasheet

Current PartRFQ

ERJ-PB6B2402V

Panasonic Electronic ComponentsIn Stock: 8832ERJ-PB6B2402V Datasheet

MFR RecommendedRFQ

ERJ-PB6D2402V

Panasonic Electronic ComponentsIn Stock: 11995ERJ-PB6D2402V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE0724KL are qualified based on the following criteria:

• Resistance Value: Must be 24 kOhms (exact match)
• Package: Must be 0805 (2012 Metric) for mechanical and electrical compatibility
• Temperature Coefficient: ±50ppm/°C (matching specification)
• Operating Temperature Range: -55°C to 155°C (matching specification)
• Composition: Thick Film (matching specification)
• RoHS Compliance: ROHS3 Compliant (matching specification)

Tolerance and power rating may vary upward without compromising circuit function, as tighter tolerances and higher power ratings represent performance enhancements. The substitute parts listed below meet or exceed the core electrical and mechanical requirements of the original specification.

Parameter Comparison

Engineering Selection Recommendations

ERJ-PB6B2402V (Panasonic): This substitute offers ±0.1% tolerance with 0.25W power rating and AEC-Q200 automotive qualification. Selection is appropriate when tighter tolerance control is required and automotive-grade reliability is specified.

ERJ-PB6D2402V (Panasonic): This substitute offers ±0.5% tolerance with 0.25W power rating and AEC-Q200 automotive qualification. Selection is appropriate when moderate tolerance improvement and automotive-grade reliability are required without the cost premium of ±0.1% tolerance.

Both Panasonic substitutes maintain full compliance with RoHS3 and REACH requirements. The increased power rating (0.25W vs. 0.125W) provides additional thermal margin in applications where the original specification is marginal.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B2402V or ERJ-PB6D2402V be used as direct drop-in replacements for RE0805FRE0724KL?

A: Yes. Both substitutes share identical package dimensions (0805 / 2012 Metric), resistance value (24 kOhms), temperature coefficient (±50ppm/°C), and operating temperature range (-55°C to 155°C). Mechanical and electrical compatibility is confirmed.

Q: What is the difference between ERJ-PB6B2402V and ERJ-PB6D2402V?

A: The primary difference is tolerance specification. ERJ-PB6B2402V provides ±0.1% tolerance, while ERJ-PB6D2402V provides ±0.5% tolerance. Both share identical power rating (0.25W), package, and automotive AEC-Q200 qualification.

Q: Does the higher power rating (0.25W vs. 0.125W) affect circuit performance?

A: No. Higher power rating indicates greater thermal capacity and does not alter electrical behavior. The component will operate identically in circuits designed for 0.125W resistors.

Q: Are the Panasonic substitutes suitable for automotive applications?

A: Yes. Both ERJ-PB6B2402V and ERJ-PB6D2402V carry AEC-Q200 automotive qualification. The original RE0805FRE0724KL does not specify automotive rating.

Q: What is the height difference between the original and substitutes?

A: RE0805FRE0724KL has maximum seated height of 0.024" (0.60mm). Both Panasonic substitutes have maximum seated height of 0.028" (0.70mm). This 0.004" (0.10mm) difference is within standard PCB assembly tolerances and does not affect functionality.