RE0805FRE0723K2L Equivalent & Substitute Parts

Part Overview

The RE0805FRE0723K2L is a 23.2 kOhms ±1% thick film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This component is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part is currently active in production and ROHS3 compliant. Substitute parts are identified when equivalent resistance values, package dimensions, and electrical ratings are available from alternative manufacturers, enabling procurement flexibility and supply chain continuity.

Substiute Parts

RE0805FRE0723K2L

YAGEOIn Stock: 778RE0805FRE0723K2L Datasheet

Current PartRFQ

ERJ-PB6B2322V

Panasonic Electronic ComponentsIn Stock: 2211ERJ-PB6B2322V Datasheet

MFR RecommendedRFQ

ERJ-PB6D2322V

Panasonic Electronic ComponentsIn Stock: 5559ERJ-PB6D2322V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE0723K2L are qualified based on the following criteria:

• Identical resistance value: 23.2 kOhms
• Identical package / case: 0805 (2012 Metric)
• Identical composition: Thick Film
• Identical temperature coefficient: ±50ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Identical RoHS compliance: ROHS3 Compliant
• Identical moisture sensitivity level: 1 (Unlimited)

The substitute parts identified are manufactured by Panasonic Electronic Components (ERJ-PB6 series). These substitutes maintain all critical electrical and mechanical parameters while offering enhanced tolerance specifications (±0.1% and ±0.5%) and higher power ratings (0.25W / 1/4W). The substitutes also include automotive AEC-Q200 qualification and pulse withstanding capability, providing additional performance margins for demanding applications.

Parameter Comparison

Engineering Selection Recommendations

Both Panasonic ERJ-PB6 series substitutes are qualified alternatives to the YAGEO RE0805FRE0723K2L. Selection between substitute options depends on application requirements:

ERJ-PB6B2322V offers ±0.1% tolerance with AEC-Q200 automotive qualification and pulse withstanding capability. This part is suitable for precision applications requiring tighter tolerance control and automotive-grade reliability.

ERJ-PB6D2322V offers ±0.5% tolerance with identical AEC-Q200 automotive qualification and pulse withstanding capability. This part provides a balance between tolerance specification and cost considerations while maintaining automotive-grade performance.

All parts maintain identical package dimensions, composition, temperature coefficient, and operating temperature range. The substitute parts provide higher power ratings (0.25W versus 0.125W), which offers additional thermal margin in circuit operation. Maximum seated height increases from 0.024" to 0.028", which must be verified against PCB layout constraints in space-critical applications.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B2322V and ERJ-PB6D2322V be used interchangeably with RE0805FRE0723K2L?

A: Yes, both Panasonic parts are direct substitutes. They maintain identical resistance value, package dimensions, composition, temperature coefficient, and operating temperature range. The primary differences are tolerance specification (±0.1% and ±0.5% versus ±1%) and power rating (0.25W versus 0.125W), both of which provide equal or superior performance.

Q: What is the impact of the increased seated height (0.028" versus 0.024")?

A: The 0.004" (0.10mm) increase in maximum seated height must be evaluated against PCB layout clearance requirements. This difference is typically negligible in standard PCB designs but should be verified in applications with tight vertical spacing constraints or where components are mounted near other tall components.

Q: Are the Panasonic substitutes suitable for automotive applications?

A: Yes, both ERJ-PB6B2322V and ERJ-PB6D2322V carry AEC-Q200 automotive qualification and pulse withstanding capability, making them suitable for automotive-grade applications. The original YAGEO part does not carry automotive qualification.

Q: What tolerance should be selected for my application?

A: Tolerance selection depends on circuit requirements. The original ±1% specification is maintained by both substitutes, with ERJ-PB6D2322V offering ±0.5% and ERJ-PB6B2322V offering ±0.1%. Tighter tolerance specifications reduce circuit performance variation but may increase component cost.

Q: Are all parts RoHS compliant?

A: Yes, all three parts (RE0805FRE0723K2L, ERJ-PB6B2322V, and ERJ-PB6D2322V) are ROHS3 compliant with moisture sensitivity level 1 (unlimited).