RE0805FRE0722K6L Equivalent & Substitute Parts

Part Overview

The RE0805FRE0722K6L is a 22.6 kOhms ±1% thick film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This component is actively produced and widely used in general-purpose electronic applications requiring standard tolerance resistive elements. Substitute parts may be required due to inventory constraints, application-specific performance requirements, or design optimization for automotive-grade reliability and enhanced power handling capabilities.

Substiute Parts

RE0805FRE0722K6L

YAGEOIn Stock: 1055RE0805FRE0722K6L Datasheet

Current PartRFQ

ERJ-PB6B2262V

Panasonic Electronic ComponentsIn Stock: 5658ERJ-PB6B2262V Datasheet

MFR RecommendedRFQ

ERJ-PB6D2262V

Panasonic Electronic ComponentsIn Stock: 5082ERJ-PB6D2262V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RE0805FRE0722K6L is determined by the following critical parameters:

• Resistance Value: Must be 22.6 kOhms (exact match required)
• Package / Case: Must be 0805 (2012 Metric) for PCB footprint compatibility
• Composition: Thick film technology maintained across all substitutes
• Operating Temperature Range: Must support -55°C ~ 155°C minimum
• RoHS Compliance: ROHS3 Compliant status required

The substitute parts listed below meet these core requirements. Variations in tolerance (±1% to ±0.1%), power rating (0.125W to 0.25W), and automotive qualification (AEC-Q200) represent enhanced or specialized capabilities rather than functional incompatibilities.

Parameter Comparison

Engineering Selection Recommendations

RE0805FRE0722K6L (YAGEO): Select for general-purpose applications where standard tolerance (±1%) and baseline power rating (0.125W) are sufficient. Maintains active production status and full RoHS3 compliance.

ERJ-PB6B2262V (Panasonic): Select for applications requiring tighter tolerance control (±0.1%) and higher power dissipation capability (0.25W). Includes automotive-grade AEC-Q200 qualification and pulse withstanding characteristics, suitable for automotive and industrial environments.

ERJ-PB6D2262V (Panasonic): Select for applications requiring moderate tolerance (±0.5%) with enhanced power rating (0.25W) and automotive qualification. Offers balance between cost and performance with AEC-Q200 compliance and pulse withstanding capability.

All three parts maintain identical package footprint, operating temperature range, and RoHS3 compliance status, ensuring direct PCB-level compatibility.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B2262V or ERJ-PB6D2262V be used as direct replacements for RE0805FRE0722K6L?

A: Yes. Both Panasonic substitutes share the same 22.6 kOhms resistance value, 0805 package, thick film composition, and operating temperature range. The enhanced tolerance and power rating represent functional improvements rather than incompatibilities.

Q: What is the difference between ERJ-PB6B2262V and ERJ-PB6D2262V?

A: Both are Panasonic automotive-grade 0805 resistors with 22.6 kOhms resistance. ERJ-PB6B2262V offers tighter tolerance (±0.1%) while ERJ-PB6D2262V provides moderate tolerance (±0.5%). Both share identical power rating (0.25W), package, and AEC-Q200 qualification.

Q: Are the substitute parts suitable for automotive applications?

A: ERJ-PB6B2262V and ERJ-PB6D2262V both carry AEC-Q200 automotive qualification and pulse withstanding characteristics. RE0805FRE0722K6L does not specify automotive qualification. Selection depends on application requirements.

Q: Will the increased height (0.028" vs 0.024") of substitute parts affect PCB assembly?

A: The height difference (0.004" / 0.10mm) is within standard PCB assembly tolerances for 0805 components. No design modifications are required.

Q: Are all parts RoHS3 compliant?

A: Yes. RE0805FRE0722K6L, ERJ-PB6B2262V, and ERJ-PB6D2262V are all ROHS3 Compliant with MSL 1 (Unlimited) moisture sensitivity rating.