RE0805FRE07200RL Equivalent & Substitute Parts

Part Overview

The RE0805FRE07200RL is a 200 Ohms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This component is actively produced and widely used in general-purpose electronic applications requiring standard tolerance resistive elements. Equivalent and substitute parts are identified when design requirements permit tolerance relaxation, power rating increases, or when alternative manufacturers' components meet or exceed the original specifications while maintaining the same package footprint and electrical characteristics.

Substiute Parts

RE0805FRE07200RL

YAGEOIn Stock: 1116RE0805FRE07200RL Datasheet

Current PartRFQ

CRCW0805200RFHEAP

Vishay DaleIn Stock: 5933CRCW0805200RFHEAP Datasheet

MFR RecommendedRFQ

ERJ-PB6B2000V

Panasonic Electronic ComponentsIn Stock: 5231ERJ-PB6B2000V Datasheet

MFR RecommendedRFQ

ERJ-PB6D2000V

Panasonic Electronic ComponentsIn Stock: 19921ERJ-PB6D2000V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RE0805FRE07200RL is determined by the following criteria:

Mandatory Matching Parameters:

• Resistance value: 200 Ohms (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±50ppm/°C (exact match required)
• Operating Temperature Range: -55°C to 155°C (exact match or better required)
• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (exact match required)

Allowable Variation Parameters:

• Tolerance: May be equal to or tighter than ±1%
• Power Rating: May be equal to or greater than 0.125W
• Height: May vary within component dimensional constraints

All identified substitute parts meet or exceed these criteria while maintaining functional and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

CRCW0805200RFHEAP (Vishay Dale) provides direct electrical equivalence with identical tolerance (±1%) and power rating (0.125W). This part includes AEC-Q200 automotive qualification, making it suitable for applications requiring automotive-grade reliability. The lower seated height (0.50mm vs 0.60mm) may provide advantages in space-constrained PCB layouts.

ERJ-PB6B2000V (Panasonic) offers tighter tolerance (±0.1%) and increased power rating (0.25W) compared to the original specification. AEC-Q200 automotive qualification and pulse withstanding capability are included. The higher seated height (0.70mm) requires verification against PCB clearance constraints.

ERJ-PB6D2000V (Panasonic) provides intermediate tolerance (±0.5%) with the same increased power rating (0.25W) and automotive qualifications as ERJ-PB6B2000V. This part offers the largest available inventory and represents a cost-effective alternative when tighter tolerance than ±0.5% is not required.

All substitute parts maintain active product status and full RoHS3 compliance.

Frequently Asked Questions (FAQ)

Q: Can CRCW0805200RFHEAP be used as a direct replacement for RE0805FRE07200RL?

A: Yes. Both parts share identical electrical specifications (200 Ohms ±1%, 0.125W) and package dimensions (0805). The CRCW0805200RFHEAP includes additional AEC-Q200 automotive qualification. Verify PCB layout compatibility, as the seated height differs by 0.004" (0.10mm).

Q: What is the difference between ERJ-PB6B2000V and ERJ-PB6D2000V?

A: Both parts are identical except for tolerance: ERJ-PB6B2000V specifies ±0.1% tolerance, while ERJ-PB6D2000V specifies ±0.5% tolerance. Both offer 0.25W power rating and AEC-Q200 qualification. Selection depends on circuit tolerance requirements.

Q: Can I use a 0.25W rated resistor in place of a 0.125W rated resistor?

A: Yes. A higher power rating indicates greater thermal dissipation capability. The 0.25W parts (Panasonic ERJ-PB6 series) are electrically compatible and provide additional thermal margin. Verify that PCB layout and thermal design accommodate the slightly increased seated height (0.70mm).

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 Compliant with Moisture Sensitivity Level 1 (Unlimited), matching the original RE0805FRE07200RL specifications.

Q: What does AEC-Q200 qualification mean?

A: AEC-Q200 is an automotive industry standard qualification for passive components. Parts meeting this standard have undergone rigorous reliability testing for automotive applications. This qualification is optional for general-purpose applications but provides additional assurance of component reliability.