Equivalent & Substitute Parts for RE0805FRE07196KL

Part Overview

The RE0805FRE07196KL is a 196 kOhms ±1% thick film chip resistor manufactured by YAGEO in the 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part maintains Active product status and is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1). Substitute parts are identified when equivalent resistance values, package dimensions, and thermal specifications align within acceptable electrical and mechanical tolerances for this product category.

Substiute Parts

RE0805FRE07196KL

YAGEOIn Stock: 842RE0805FRE07196KL Datasheet

Current PartRFQ

ERJ-PB6B1963V

Panasonic Electronic ComponentsIn Stock: 7448ERJ-PB6B1963V Datasheet

MFR RecommendedRFQ

ERJ-PB6D1963V

Panasonic Electronic ComponentsIn Stock: 10170ERJ-PB6D1963V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE07196KL are qualified based on the following criteria:

Primary Substitution Parameters:

• Identical resistance value: 196 kOhms
• Identical package format: 0805 (2012 Metric)
• Identical composition: Thick Film
• Identical operating temperature range: -55°C ~ 155°C
• Identical temperature coefficient: ±50ppm/°C
• Identical RoHS compliance: ROHS3 Compliant
• Identical moisture sensitivity level: MSL 1

Allowable Variations:

• Tolerance: Substitute parts may have equal or tighter tolerance specifications (±1% or better)
• Power rating: Substitute parts may have equal or higher power ratings (0.125W or greater)
• Height: Substitute parts may have different seated heights within the 0805 package specification

The two identified substitute parts (ERJ-PB6B1963V and ERJ-PB6D1963V) from Panasonic Electronic Components meet all primary substitution parameters. Both parts feature tighter tolerance specifications and higher power ratings than the main part, with additional automotive AEC-Q200 qualification and pulse withstanding capability.

Parameter Comparison

Engineering Selection Recommendations

Both ERJ-PB6B1963V and ERJ-PB6D1963V are direct substitutes for RE0805FRE07196KL based on electrical and mechanical compatibility. Selection between substitute options depends on tolerance and power dissipation requirements:

ERJ-PB6B1963V Selection Criteria:

• Applications requiring tighter tolerance specification (±0.1%)
• Designs benefiting from higher power rating (0.25W vs. 0.125W)
• Systems requiring automotive AEC-Q200 qualification
• Circuits where pulse withstanding capability is specified

ERJ-PB6D1963V Selection Criteria:

• Applications with moderate tolerance requirements (±0.5%)
• Designs benefiting from higher power rating (0.25W vs. 0.125W)
• Systems requiring automotive AEC-Q200 qualification
• Circuits where pulse withstanding capability is specified

All three parts maintain identical ROHS3 compliance, MSL 1 rating, and operating temperature specifications. The substitute parts from Panasonic Electronic Components offer enhanced specifications with no electrical or mechanical incompatibility with the original YAGEO part.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B1963V and ERJ-PB6D1963V be used interchangeably with RE0805FRE07196KL?

A: Yes. Both Panasonic parts are direct substitutes. They share identical resistance values, package dimensions, operating temperature ranges, and thermal coefficients. The primary differences are tolerance specifications and power ratings, which represent improvements over the original part.

Q: What is the impact of the tighter tolerance in ERJ-PB6B1963V (±0.1% vs. ±1%)?

A: Tighter tolerance means the actual resistance value will be closer to the nominal 196 kOhms specification. This is beneficial for precision analog circuits, measurement applications, and feedback networks where resistance accuracy directly affects circuit performance. Applications tolerant of ±1% variation can use either substitute without functional impact.

Q: Why do the substitute parts have higher power ratings (0.25W vs. 0.125W)?

A: Higher power ratings provide thermal margin in applications where the resistor dissipates power near its rated limit. This does not change the electrical behavior in circuits designed for 0.125W dissipation; it only provides additional safety margin and potentially extends component lifetime under thermal stress.

Q: Are there package compatibility concerns with the 0.028" (0.70mm) seated height of substitute parts versus 0.024" (0.60mm) of the original?

A: No. Both heights fall within standard 0805 (2012 Metric) package specifications. The 0.004" (0.10mm) difference is within typical PCB assembly tolerances and does not affect electrical performance or mechanical fit in standard 0805 footprints.

Q: What does AEC-Q200 qualification mean for these substitute parts?

A: AEC-Q200 is an automotive industry standard qualification for passive components. It certifies that ERJ-PB6B1963V and ERJ-PB6D1963V meet stringent reliability, temperature cycling, and performance requirements for automotive applications. This qualification is not required for non-automotive use but indicates enhanced quality and reliability.

Q: Can I use these substitutes in high-reliability or military applications?

A: Substitution decisions for high-reliability or military applications must be based on specific design requirements and qualification documentation. The provided parameter data confirms electrical and mechanical compatibility, but application-specific qualification requirements must be verified independently.