RE0805FRE07162KL Equivalent & Substitute Parts

Part Overview

The RE0805FRE07162KL is a 162 kOhms ±1% thick film chip resistor manufactured by YAGEO in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part maintains Active product status and is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1). Substitute parts are identified when equivalent resistance values, package dimensions, and electrical ratings can accommodate the application requirements while maintaining compatibility with PCB assembly processes.

Substiute Parts

RE0805FRE07162KL

YAGEOIn Stock: 1175RE0805FRE07162KL Datasheet

Current PartRFQ

ERJ-PB6B1623V

Panasonic Electronic ComponentsIn Stock: 1155ERJ-PB6B1623V Datasheet

MFR RecommendedRFQ

ERJ-PB6D1623V

Panasonic Electronic ComponentsIn Stock: 5986ERJ-PB6D1623V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE07162KL are qualified based on the following criteria:

• Identical resistance value: 162 kOhms
• Identical package format: 0805 (2012 Metric)
• Identical composition: Thick Film
• Identical temperature coefficient: ±50ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Identical RoHS compliance: ROHS3 Compliant
• Identical MSL rating: 1 (Unlimited)

Substitute parts may exceed the original power rating (0.125W minimum) and tolerance specification (±1% maximum) without affecting functional compatibility. The identified substitutes are Panasonic ERJ-PB6 series resistors, which meet all mandatory electrical and mechanical parameters while offering enhanced specifications in power handling and tolerance accuracy.

Parameter Comparison

Engineering Selection Recommendations

Both Panasonic ERJ-PB6 series substitutes maintain full compatibility with applications designed for the RE0805FRE07162KL. The ERJ-PB6B1623V and ERJ-PB6D1623V offer increased power dissipation capability (0.25W versus 0.125W) and tighter tolerance specifications (±0.1% and ±0.5% respectively versus ±1%). Both substitute parts carry AEC-Q200 automotive qualification and pulse withstanding characteristics, indicating suitability for demanding industrial and automotive applications. All three parts maintain identical package dimensions, thermal characteristics, and compliance certifications, ensuring direct PCB assembly compatibility without design modification.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B1623V or ERJ-PB6D1623V be used as direct replacements for RE0805FRE07162KL?

A: Yes. Both Panasonic parts are direct substitutes. They maintain identical resistance values, package format (0805), composition (thick film), temperature coefficient, operating temperature range, and compliance certifications. The increased power rating and improved tolerance are backward-compatible enhancements.

Q: What is the difference between ERJ-PB6B1623V and ERJ-PB6D1623V?

A: The primary difference is tolerance specification. ERJ-PB6B1623V offers ±0.1% tolerance, while ERJ-PB6D1623V offers ±0.5% tolerance. Both share identical power rating (0.25W), package dimensions, and thermal characteristics. Selection depends on circuit accuracy requirements.

Q: Are there physical dimension differences between the original and substitute parts?

A: No. All three parts use the 0805 (2012 Metric) package with identical length (0.079" / 2.00mm) and width (0.049" / 1.25mm). Maximum seated heights are 0.024" (0.60mm) for RE0805FRE07162KL and 0.028" (0.70mm) for Panasonic substitutes, representing a negligible difference that does not affect PCB assembly compatibility.

Q: Do the substitute parts meet the same compliance requirements?

A: Yes. All three parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (unlimited) moisture sensitivity rating. The Panasonic substitutes additionally carry AEC-Q200 automotive qualification, which does not restrict their use in non-automotive applications.

Q: Can I use these parts interchangeably in existing designs?

A: Yes. The identical package format, resistance value, temperature coefficient, and operating temperature range ensure direct interchangeability. No PCB layout or schematic modifications are required.