RE0805FRE0714KL Equivalent & Substitute Parts

Part Overview

The RE0805FRE0714KL is a 14 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This component is actively produced and widely used in general-purpose electronic applications requiring standard tolerance resistive elements. Substitute parts may be required due to inventory availability, supply chain constraints, or application-specific performance requirements such as enhanced tolerance or higher power ratings.

Substiute Parts

RE0805FRE0714KL

YAGEOIn Stock: 654RE0805FRE0714KL Datasheet

Current PartRFQ

ERJ-PB6B1402V

Panasonic Electronic ComponentsIn Stock: 3248ERJ-PB6B1402V Datasheet

MFR RecommendedRFQ

ERJ-PB6D1402V

Panasonic Electronic ComponentsIn Stock: 3271ERJ-PB6D1402V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE0714KL must maintain electrical and mechanical compatibility based on the following critical parameters:

Mandatory Compatibility Criteria:

• Resistance value: 14 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film
• Temperature Coefficient: ±50ppm/°C
• Operating Temperature Range: -55°C ~ 155°C (minimum requirement)

Allowable Variations:

• Tolerance: May be equal to or tighter than ±1%
• Power Rating: May be equal to or higher than 0.125W
• RoHS and MSL compliance: Must meet or exceed ROHS3 and MSL 1 standards

The two substitute parts listed (ERJ-PB6B1402V and ERJ-PB6D1402V) are manufactured by Panasonic Electronic Components and meet all mandatory compatibility criteria while offering enhanced tolerance specifications and higher power ratings.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts are suitable replacements for the RE0805FRE0714KL based on compliance and product status criteria:

ERJ-PB6B1402V offers the tightest tolerance specification at ±0.1% with a higher power rating of 0.25W. This part is AEC-Q200 qualified and pulse withstanding, making it suitable for automotive and high-reliability applications requiring enhanced precision.

ERJ-PB6D1402V provides a mid-range tolerance of ±0.5% with the same 0.25W power rating and AEC-Q200 qualification. This part balances tolerance performance with cost considerations while maintaining automotive-grade reliability.

Both substitutes maintain full ROHS3 compliance and MSL 1 rating, ensuring compatibility with standard manufacturing and storage conditions. Selection between substitutes should be based on application-specific tolerance and power dissipation requirements.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B1402V and ERJ-PB6D1402V be used interchangeably with RE0805FRE0714KL?

A: Yes, both parts are electrically and mechanically compatible. They share the same 14 kOhms resistance value, 0805 package, temperature coefficient, and operating temperature range. The primary differences are tolerance (tighter in substitutes) and power rating (higher in substitutes), which do not prevent substitution.

Q: What is the significance of the tighter tolerance in the substitute parts?

A: ERJ-PB6B1402V (±0.1%) and ERJ-PB6D1402V (±0.5%) provide narrower resistance value ranges compared to the main part (±1%). This allows for more precise circuit performance in applications where tolerance stack-up is critical. Tighter tolerance does not compromise compatibility with designs specified for ±1%.

Q: Are the substitute parts suitable for automotive applications?

A: Yes. Both ERJ-PB6B1402V and ERJ-PB6D1402V carry AEC-Q200 qualification and pulse withstanding features, making them suitable for automotive-grade applications. The main part (RE0805FRE0714KL) does not specify automotive qualification.

Q: Does the higher power rating of the substitutes affect circuit design?

A: No. The substitute parts are rated for 0.25W compared to the main part's 0.125W. A higher power rating does not negatively impact circuit performance; it simply provides additional thermal margin. The parts are physically identical in the 0805 package.

Q: Are all three parts ROHS3 compliant?

A: Yes. RE0805FRE0714KL, ERJ-PB6B1402V, and ERJ-PB6D1402V are all ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard manufacturing and storage protocols.

Q: What is the basis for substitution compatibility?

A: Substitution is based on matching the resistance value (14 kOhms), package type (0805), composition (thick film), temperature coefficient (±50ppm/°C), and operating temperature range (-55°C ~ 155°C). All three parts meet these criteria.