RE0805FRE0711KL Equivalent & Substitute Parts

Part Overview

The RE0805FRE0711KL is a 11 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This component is actively produced and widely used in general-purpose electronic applications requiring standard tolerance resistive elements. Equivalent and substitute parts are identified when design requirements permit tolerance relaxation, power rating upgrades, or when alternative qualified manufacturers are preferred for supply chain optimization.

Substiute Parts

RE0805FRE0711KL

YAGEOIn Stock: 904RE0805FRE0711KL Datasheet

Current PartRFQ

ERJ-PB6B1102V

Panasonic Electronic ComponentsIn Stock: 16029ERJ-PB6B1102V Datasheet

MFR RecommendedRFQ

ERJ-PB6D1102V

Panasonic Electronic ComponentsIn Stock: 6540ERJ-PB6D1102V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE0711KL are qualified based on the following criteria:

Mandatory Compatibility Parameters:

• Resistance value: 11 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±50ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match or better required)

Allowable Variation Parameters:

• Tolerance: May be tighter (lower value) than ±1%
• Power Rating: May be equal or higher than 0.125W
• Manufacturer: Alternative qualified manufacturers permitted

The identified substitutes meet all mandatory compatibility parameters while offering enhanced specifications in tolerance and power rating, with automotive-grade qualification (AEC-Q200) and pulse withstanding capability.

Parameter Comparison

Engineering Selection Recommendations

Both Panasonic ERJ-PB6 series substitutes are actively produced and fully compliant with ROHS3 and REACH requirements, matching the environmental qualification of the main part.

ERJ-PB6B1102V offers the tightest tolerance specification at ±0.1% with doubled power rating (0.25W) and includes AEC-Q200 automotive qualification and pulse withstanding capability. This part is suitable for applications requiring enhanced precision and automotive-grade reliability.

ERJ-PB6D1102V provides intermediate tolerance at ±0.5% with equivalent power rating upgrade (0.25W) and identical automotive qualification features. This part balances cost and performance for applications where ±0.5% tolerance is acceptable.

Both substitutes maintain identical thermal characteristics and operating temperature range, ensuring direct functional compatibility in circuit designs originally specified for the RE0805FRE0711KL.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B1102V or ERJ-PB6D1102V be used as direct replacements for RE0805FRE0711KL?

A: Yes. Both substitutes share identical resistance value, package, composition, temperature coefficient, and operating temperature range. The tighter tolerance and higher power rating of the Panasonic parts represent enhanced specifications that are backward compatible with designs specified for the YAGEO part.

Q: What is the difference between ERJ-PB6B1102V and ERJ-PB6D1102V?

A: The primary difference is tolerance specification. ERJ-PB6B1102V provides ±0.1% tolerance, while ERJ-PB6D1102V provides ±0.5% tolerance. Both share identical power rating (0.25W), package dimensions, and automotive qualification. Selection depends on circuit tolerance requirements.

Q: Are the physical dimensions identical between the main part and substitutes?

A: The length and width are identical at 0.079" L x 0.049" W (2.00mm x 1.25mm). The seated height differs slightly: RE0805FRE0711KL at 0.024" (0.60mm) maximum versus ERJ-PB6 series at 0.028" (0.70mm) maximum. This minor height difference does not affect PCB layout compatibility for standard 0805 footprints.

Q: Do the substitutes require different handling or storage procedures?

A: No. All three parts share identical Moisture Sensitivity Level (MSL) rating of 1 (Unlimited), requiring no special moisture control during storage or handling.

Q: Are the Panasonic substitutes suitable for automotive applications?

A: Yes. Both ERJ-PB6B1102V and ERJ-PB6D1102V carry AEC-Q200 automotive qualification and pulse withstanding capability, making them suitable for automotive-grade circuit designs.