Equivalent & Substitute Parts for RE0805FRE0710KL

Part Overview

The RE0805FRE0710KL is a 10 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by YAGEO. This component is actively produced and widely used in general-purpose electronic applications requiring standard tolerance and power ratings. Substitute parts are identified when equivalent electrical characteristics and mechanical compatibility are maintained within the allowed parameter ranges for this resistor category.

Substiute Parts

RE0805FRE0710KL

YAGEOIn Stock: 992RE0805FRE0710KL Datasheet

Current PartRFQ

CRCW080510K0FHEAP

Vishay DaleIn Stock: 26439CRCW080510K0FHEAP Datasheet

MFR RecommendedRFQ

ERJ-PB6B1002V

Panasonic Electronic ComponentsIn Stock: 66612ERJ-PB6B1002V Datasheet

MFR RecommendedRFQ

ERJ-PB6D1002V

Panasonic Electronic ComponentsIn Stock: 29994ERJ-PB6D1002V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the RE0805FRE0710KL is determined by the following critical parameters:

• Resistance value: 10 kOhms (exact match required)
• Package / Case: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±50ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)

Substitute parts may vary in tolerance (±0.1% to ±1%), power rating (0.125W to 0.25W), and additional features (such as AEC-Q200 automotive qualification) while maintaining functional equivalence. Physical dimensions and height may vary within the 0805 package specification.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain active product status and ROHS3 compliance, ensuring continued availability and regulatory conformance.

CRCW080510K0FHEAP (Vishay Dale) provides direct electrical equivalence with identical tolerance (±1%) and power rating (0.125W). This part includes AEC-Q200 automotive qualification, suitable for applications requiring automotive-grade reliability without increased power dissipation requirements.

ERJ-PB6B1002V and ERJ-PB6D1002V (Panasonic Electronic Components) offer enhanced specifications with higher power ratings (0.25W) and tighter tolerances (±0.1% and ±0.5% respectively). Both include AEC-Q200 automotive qualification and pulse withstanding capability. These parts are suitable for applications where improved thermal margin or tolerance performance is beneficial.

Selection between substitute parts depends on application-specific requirements for tolerance, power dissipation margin, and automotive qualification status.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B1002V or ERJ-PB6D1002V be used as direct replacements for RE0805FRE0710KL?

A: Yes. Both Panasonic parts maintain the required 10 kOhms resistance, 0805 package, thick film composition, ±50ppm/°C temperature coefficient, and -55°C ~ 155°C operating range. The higher power rating (0.25W vs. 0.125W) and tighter tolerance provide enhanced performance margins without affecting circuit compatibility.

Q: What is the difference between CRCW080510K0FHEAP and the Panasonic alternatives?

A: CRCW080510K0FHEAP matches the original part's tolerance (±1%) and power rating (0.125W) while adding AEC-Q200 automotive qualification. Panasonic parts offer higher power ratings and tighter tolerances with the same automotive qualification. Selection depends on whether enhanced specifications are required for the application.

Q: Are all substitute parts available in the same packaging format?

A: Yes. All listed parts are supplied in Tape & Reel (TR) packaging in the 0805 (2012 Metric) package format, ensuring compatibility with standard pick-and-place assembly processes.

Q: Do the substitute parts have the same moisture sensitivity level?

A: Yes. All parts, including the original RE0805FRE0710KL, have Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture handling requirements during storage or assembly.

Q: Can I use a substitute part with tighter tolerance in a circuit designed for ±1% tolerance?

A: Yes. Parts with tighter tolerance (±0.1% or ±0.5%) are fully compatible with circuits designed for ±1% tolerance. The tighter tolerance provides improved accuracy without introducing incompatibility.