RE0805FRE07102KL Equivalent & Substitute Parts

Part Overview

The RE0805FRE07102KL is a 102 kOhms ±1% thick film chip resistor manufactured by YAGEO in the 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation with an operating temperature range of -55°C to 155°C. The part maintains Active product status and is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and design optimization across manufacturing environments.

Substiute Parts

RE0805FRE07102KL

YAGEOIn Stock: 1140RE0805FRE07102KL Datasheet

Current PartRFQ

ERJ-PB6B1023V

Panasonic Electronic ComponentsIn Stock: 6857ERJ-PB6B1023V Datasheet

MFR RecommendedRFQ

ERJ-PB6D1023V

Panasonic Electronic ComponentsIn Stock: 4489ERJ-PB6D1023V Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RE0805FRE07102KL are qualified based on the following critical parameters:

• Identical resistance value: 102 kOhms
• Compatible package format: 0805 (2012 Metric)
• Matching composition: Thick Film
• Identical temperature coefficient: ±50ppm/°C
• Identical operating temperature range: -55°C ~ 155°C
• Equivalent or superior tolerance specifications
• Equal or greater power rating capability
• Matching or superior RoHS and MSL compliance

The substitute parts identified are manufactured by Panasonic Electronic Components under the ERJ-PB6 series. These components meet or exceed the electrical and mechanical specifications of the primary part while offering enhanced tolerance accuracy and increased power handling capacity.

Parameter Comparison

Engineering Selection Recommendations

Both Panasonic ERJ-PB6 series substitutes are qualified alternatives to the YAGEO RE0805FRE07102KL based on electrical and mechanical compatibility. Selection between substitute options depends on application-specific requirements:

ERJ-PB6B1023V provides the tightest tolerance specification at ±0.1%, suitable for precision analog circuits and measurement applications requiring enhanced accuracy. This part carries AEC-Q200 automotive qualification.

ERJ-PB6D1023V offers ±0.5% tolerance with equivalent AEC-Q200 automotive qualification, providing a balance between tolerance performance and cost optimization for general-purpose applications.

Both substitutes feature doubled power rating capacity (0.25W versus 0.125W), providing thermal margin in applications approaching the original part's power dissipation limits. The marginal increase in seated height (0.028" versus 0.024") is within standard PCB design tolerances for 0805 package components.

All three parts maintain identical ROHS3 compliance, MSL 1 rating, and operating temperature specifications, ensuring direct substitution without design modification.

Frequently Asked Questions (FAQ)

Q: Can ERJ-PB6B1023V and ERJ-PB6D1023V be used interchangeably with RE0805FRE07102KL?

A: Yes. Both Panasonic parts are electrically and mechanically compatible substitutes. The primary differences are tolerance accuracy (±0.1% and ±0.5% respectively versus ±1%) and power rating (0.25W versus 0.125W). Component selection should be based on circuit tolerance requirements and thermal design margins.

Q: What is the impact of the increased seated height on PCB assembly?

A: The substitute parts have a maximum seated height of 0.028" (0.70mm) compared to 0.024" (0.60mm) for the original part. This 0.004" (0.10mm) difference is negligible for standard PCB design and does not affect assembly compatibility or clearance in typical applications.

Q: Are the substitute parts suitable for automotive applications?

A: The Panasonic ERJ-PB6 series parts carry AEC-Q200 automotive qualification, making them suitable for automotive-grade applications. The original YAGEO part does not specify automotive qualification. If automotive compliance is required, the Panasonic substitutes are the appropriate selection.

Q: How do tolerance differences affect circuit performance?

A: The original part specifies ±1% tolerance. The ERJ-PB6B1023V substitute provides ±0.1% tolerance, offering tighter resistance value control suitable for precision applications. The ERJ-PB6D1023V provides ±0.5% tolerance, representing a middle ground. Circuit design should account for the specified tolerance of the selected component.

Q: Are all three parts ROHS3 compliant?

A: Yes. The RE0805FRE07102KL, ERJ-PB6B1023V, and ERJ-PB6D1023V are all ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, ensuring equivalent environmental and regulatory compliance.