RCS3216J100CS Equivalent & Substitute Parts Reference

Part Overview

The RCS3216J100CS is a 10 Ohm ±5% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant properties, operating across -55°C to 155°C temperature range. The part is ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Equivalent and substitute parts are identified based on matching or superior electrical and mechanical specifications within the 1206 package form factor. Substitutes maintain the same resistance value (10 Ohms), operating temperature range, and package dimensions while offering alternative tolerance grades, power ratings, or manufacturer certifications.

Key Parameters

Parameter	RCS3216J100CS
Resistance Value	10 Ohms
Tolerance	±5%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Size / Dimension	0.126" L x 0.063" W (3.20mm x 1.60mm)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution logic for the RCS3216J100CS is determined by the following critical parameters:

Mandatory Matching Parameters:

Resistance Value: 10 Ohms (exact match required)
Package / Case: 1206 (3216 Metric) (physical compatibility)
Operating Temperature Range: -55°C ~ 155°C (functional compatibility)
Temperature Coefficient: ±100ppm/°C (thermal stability)
Composition: Thick Film (material consistency)

Allowable Variation Parameters:

Tolerance: ±5% (main part) to ±1% (substitutes) — tighter tolerance is acceptable
Power Rating: 0.25W (main part) to 0.5W, 0.667W, or 0.75W (substitutes) — higher power rating is acceptable
Manufacturer: Samsung Electro-Mechanics, Bourns Inc., Vishay Dale, Panasonic Electronic Components, Rohm Semiconductor, Stackpole Electronics Inc.
Packaging Format: Tape & Reel (TR), Cut Tape (CT) & Digi-Reel®
Certifications: AEC-Q200 automotive qualification (optional enhancement)
RoHS Status: ROHS3 Compliant preferred; ROHS non-compliant parts noted

All substitute parts listed maintain identical mechanical dimensions, electrical performance within specified tolerances, and environmental operating conditions.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power Rating	Package	Temp Coeff	Operating Temp	RoHS Status	Product Status
RCS3216J100CS	Samsung Electro-Mechanics	10 Ohms	±5%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3 Compliant	Active
CR1206-FX-10R0ELF	Bourns Inc.	10 Ohms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3 Compliant	Active
CRCW120610R0FKEA	Vishay Dale	10 Ohms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3 Compliant	Active
CRCW120610R0FKEAHP	Vishay Dale	10 Ohms	±1%	0.75W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3 Compliant	Active
CRCW120610R0FKTA	Vishay Dale	10 Ohms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	RoHS non-compliant	Active
ERJ-8ENF10R0V	Panasonic Electronic Components	10 Ohms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3 Compliant	Not For New Designs
ERJ-P08F10R0V	Panasonic Electronic Components	10 Ohms	±1%	0.667W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3 Compliant	Active
ESR18EZPF10R0	Rohm Semiconductor	10 Ohms	±1%	0.5W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3 Compliant	Active
RMCF1206FT10R0	Stackpole Electronics Inc	10 Ohms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3 Compliant	Active

Engineering Selection Recommendations

Primary Substitutes (Recommended for New Designs):

RMCF1206FT10R0 (Stackpole Electronics Inc.) is the preferred substitute. This part maintains Active product status, ROHS3 compliance, and identical electrical specifications with ±1% tolerance improvement over the main part. Stackpole's RMCF series offers the highest inventory availability (2,955,310 pcs) and AEC-Q200 automotive qualification.

CRCW120610R0FKEA (Vishay Dale) provides equivalent performance with ROHS3 compliance and Active status. This part includes AEC-Q200 automotive certification and is suitable for applications requiring automotive-grade reliability.

CR1206-FX-10R0ELF (Bourns Inc.) offers direct functional equivalence with ±1% tolerance and ROHS3 compliance. Bourns CR1206 series provides consistent performance across industrial applications.

Higher Power Rating Alternatives:

CRCW120610R0FKEAHP (Vishay Dale) provides 0.75W power rating in identical 1206 package with ±1% tolerance and AEC-Q200 certification. Select this part when circuit design requires enhanced thermal margin or pulse withstanding capability.

ERJ-P08F10R0V (Panasonic Electronic Components) offers 0.667W (2/3W) power rating with pulse withstanding capability and AEC-Q200 certification. This part is suitable for applications with transient current requirements.

ESR18EZPF10R0 (Rohm Semiconductor) provides 0.5W (1/2W) power rating with pulse withstanding and AEC-Q200 certification, offering intermediate power capability between standard and high-power variants.

Legacy / Restricted Status:

ERJ-8ENF10R0V (Panasonic Electronic Components) carries "Not For New Designs" status. This part is functionally equivalent but should not be selected for new product development. Existing inventory may be used for legacy system maintenance only.

CRCW120610R0FKTA (Vishay Dale) is RoHS non-compliant and REACH Affected. This part should not be used in applications requiring regulatory compliance with ROHS3 or REACH standards.

Frequently Asked Questions (FAQ)

Q: Can I substitute RCS3216J100CS with a ±1% tolerance part?

A: Yes. The RCS3216J100CS has ±5% tolerance. Any substitute with ±1% tolerance (such as RMCF1206FT10R0, CRCW120610R0FKEA, or CR1206-FX-10R0ELF) provides tighter tolerance and is electrically compatible. Tighter tolerance does not create compatibility issues; it improves circuit accuracy.

Q: What is the difference between 0.25W, 0.5W, 0.667W, and 0.75W power ratings?

A: Power rating indicates maximum continuous power dissipation. The RCS3216J100CS is rated 0.25W. Substitutes with higher power ratings (0.5W, 0.667W, 0.75W) can safely replace it in any application. Higher power rating provides thermal margin and is suitable for circuits with higher current or pulse requirements. Do not substitute with lower power ratings.

Q: Are all substitute parts in 1206 package physically identical?

A: All listed substitutes use 1206 (3216 Metric) package with identical length (0.126" / 3.20mm) and width (0.063" / 1.60mm). Height varies slightly (0.024" to 0.030" / 0.60mm to 0.75mm) but remains within PCB assembly tolerances. All parts are mechanically interchangeable on standard 1206 footprints.

Q: What does AEC-Q200 certification mean?

A: AEC-Q200 is automotive-grade qualification for passive components. Parts with AEC-Q200 certification (CRCW120610R0FKEA, CRCW120610R0FKEAHP, CRCW120610R0FKTA, ERJ-8ENF10R0V, ERJ-P08F10R0V, ESR18EZPF10R0, RMCF1206FT10R0) meet stringent automotive reliability and environmental stress testing requirements. These parts are suitable for automotive and industrial applications requiring enhanced reliability.

Q: Why is ERJ-8ENF10R0V marked "Not For New Designs"?

A: "Not For New Designs" status indicates the manufacturer has discontinued active development and recommends alternative parts for new product development. Existing inventory may be used for legacy system support or maintenance. For new designs, select RMCF1206FT10R0, CRCW120610R0FKEA, or CR1206-FX-10R0ELF instead.

Q: What is the difference between ROHS3 Compliant and RoHS non-compliant parts?

A: ROHS3 Compliant parts meet Restriction of Hazardous Substances Directive 3 requirements and are suitable for products sold in EU markets and applications requiring regulatory compliance. RoHS non-compliant parts (CRCW120610R0FKTA) contain restricted substances and should not be used in regulated applications. For new designs, select only ROHS3 Compliant parts.

Q: Can I use CRCW120610R0FKEAHP (0.75W) instead of RCS3216J100CS (0.25W)?

A: Yes. The 0.75W part can replace the 0.25W part in any circuit. Higher power rating provides additional thermal capacity and is fully backward compatible. The circuit will operate identically; the resistor will simply have lower temperature rise under the same current conditions.

Q: What is Moisture Sensitivity Level (MSL) 1?

A: MSL 1 (Unlimited) indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. All listed parts have MSL 1 rating, meaning they can be stored at standard conditions without desiccant packaging or moisture bake-out procedures.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Most substitutes are available in Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel® packaging. Packaging format does not affect electrical or mechanical compatibility. Select packaging based on assembly process requirements (automated pick-and-place systems typically use Tape & Reel; manual assembly may use Cut Tape).

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message