RCS3216F6R8CS Equivalent & Substitute Parts

Part Overview

The RCS3216F6R8CS is a 6.8 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status and is designed for general-purpose resistive applications requiring anti-sulfur and moisture-resistant characteristics. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling direct replacement in circuit designs without functional degradation.

Substiute Parts

RCS3216F6R8CS

Samsung Electro-MechanicsIn Stock: 865RCS3216F6R8CS Datasheet

Current PartRFQ

RC3216F6R8CS

Samsung Electro-MechanicsIn Stock: 1195RC3216F6R8CS Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCS3216F6R8CS is determined by strict alignment of the following parameters:

Critical Substitution Parameters:

• Resistance value: 6.8 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Package type: 1206 (3216 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature coefficient: ±300ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)
• RoHS compliance: ROHS3 Compliant (minimum requirement)
• MSL rating: 1 (Unlimited) (exact match required)

The substitute part RC3216F6R8CS meets all critical parameters and is therefore classified as a direct equivalent. Both components share identical electrical specifications, mechanical dimensions, and environmental compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The RC3216F6R8CS is a direct equivalent substitute for the RCS3216F6R8CS based on identical electrical and mechanical specifications. Both components are manufactured by Samsung Electro-Mechanics, maintain Active product status, and carry ROHS3 compliance certification. The marginal difference in seated height (0.66mm versus 0.65mm) is within acceptable manufacturing tolerance and does not affect circuit performance or PCB assembly compatibility.

Selection between the main part and substitute should be based on availability, packaging format (the substitute is available in Cut Tape and Digi-Reel formats), and supply chain requirements. Both components satisfy identical functional and compliance requirements for 1206 thick film resistor applications.

Frequently Asked Questions (FAQ)

Q: Can RC3216F6R8CS replace RCS3216F6R8CS in production assemblies?

A: Yes. Both components share identical resistance (6.8 Ohms), tolerance (±1%), power rating (0.25W), package type (1206), composition (thick film), temperature coefficient (±300ppm/°C), operating temperature range (-55°C ~ 155°C), and compliance certifications (ROHS3, REACH Unaffected). The components are electrically and mechanically interchangeable.

Q: What is the difference between the RCS and RC series designations?

A: The RCS3216F6R8CS includes anti-sulfur features in addition to moisture resistance. The RC3216F6R8CS provides moisture resistance without the anti-sulfur specification. Both series maintain identical electrical performance and package specifications. Series selection depends on environmental exposure requirements.

Q: Are there dimensional compatibility concerns?

A: No. Both components conform to the 1206 (3216 Metric) package standard with dimensions of 0.126" L x 0.063" W (3.20mm x 1.60mm). The seated height difference (0.66mm versus 0.65mm) is within standard manufacturing tolerance and does not affect PCB assembly or circuit operation.

Q: What packaging formats are available for the substitute part?

A: The RC3216F6R8CS is available in Cut Tape (CT) and Digi-Reel® packaging formats, providing flexibility for both manual and automated assembly processes.

Q: Are both components RoHS compliant?

A: Yes. Both RCS3216F6R8CS and RC3216F6R8CS are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing and distribution.