RCS3216F6983CS Equivalent & Substitute Parts Reference

Part Overview

The RCS3216F6983CS is a 698 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant characteristics. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component requirements, enabling direct replacement in circuit designs without performance degradation.

Substiute Parts

RCS3216F6983CS

Samsung Electro-MechanicsIn Stock: 1086RCS3216F6983CS Datasheet

Current PartRFQ

CRCW1206698KFKEA

Vishay DaleIn Stock: 15854CRCW1206698KFKEA Datasheet

SimilarRFQ

ERJ-8ENF6983V

Panasonic Electronic ComponentsIn Stock: 48476ERJ-8ENF6983V Datasheet

SimilarRFQ

RC1206FR-07698KL

YAGEOIn Stock: 2584RC1206FR-07698KL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCS3216F6983CS is determined by strict alignment of the following parameters:

Critical Matching Parameters:

• Resistance value: 698 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

All identified substitute parts meet these electrical and mechanical specifications. Variations in product status, packaging format (Tape & Reel vs. bulk), and optional certifications (such as AEC-Q200 automotive qualification) do not prevent substitution but may influence selection based on application requirements.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Product Status):

CRCW1206698KFKEA (Vishay Dale) and RC1206FR-07698KL (YAGEO) are recommended as primary substitutes. Both components maintain Active product status, ensuring continued availability and manufacturer support. CRCW1206698KFKEA includes AEC-Q200 automotive qualification, suitable for applications requiring automotive-grade reliability. RC1206FR-07698KL provides moisture-resistant characteristics aligned with the original component specification.

Secondary Substitute (Not For New Designs):

ERJ-8ENF6983V (Panasonic Electronic Components) meets all electrical and mechanical parameters but carries "Not For New Designs" product status. This component is suitable for replacement in existing production runs or legacy system maintenance where supply continuity is required. New design implementations should prioritize Active status alternatives.

Compliance Considerations:

All substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) rating, ensuring compatibility with standard PCB assembly processes and environmental regulations. Selection between substitutes should be based on application-specific requirements such as automotive qualification needs or preferred supplier relationships.

Frequently Asked Questions (FAQ)

Q: Can CRCW1206698KFKEA replace RCS3216F6983CS in all applications?

A: Yes. CRCW1206698KFKEA meets all critical electrical parameters (698 kOhms ±1%, 0.25W, ±100ppm/°C, -55°C ~ 155°C) and mechanical specifications (1206 package, 0.024" seated height). The component is ROHS3 compliant with MSL 1 rating. The primary difference is AEC-Q200 automotive certification, which adds qualification value without restricting general-purpose applications.

Q: Why is ERJ-8ENF6983V marked "Not For New Designs"?

A: "Not For New Designs" indicates the manufacturer has discontinued active development and recommends alternative components for new product development. However, the part remains electrically and mechanically equivalent and is suitable for replacement in existing systems or production continuity scenarios.

Q: Are there dimensional compatibility concerns between substitutes?

A: Seated height varies slightly: RCS3216F6983CS (0.66mm), CRCW1206698KFKEA (0.60mm), ERJ-8ENF6983V (0.70mm), and RC1206FR-07698KL (0.65mm). All variations remain within standard 1206 package tolerances and do not affect PCB assembly or circuit performance. Length and width dimensions are identical across all parts (3.20mm x 1.60mm or equivalent).

Q: What is the significance of MSL 1 (Unlimited) rating?

A: MSL 1 indicates unlimited shelf life without moisture baking requirements. All substitute parts carry this rating, eliminating moisture sensitivity concerns during storage, handling, and assembly processes.

Q: Can substitutes be mixed in the same production batch?

A: Yes. All substitute parts are electrically and mechanically equivalent with identical tolerance, temperature coefficient, and operating range specifications. Mixed sourcing is permissible from a circuit design perspective, though procurement and quality control procedures should address supplier traceability requirements.