RCS3216F6192CS Equivalent & Substitute Parts

Part Overview

The RCS3216F6192CS is a 61.9 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant properties. The part operates across -55°C to 155°C temperature range and complies with ROHS3 and REACH standards.

Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and environmental ratings are maintained across different manufacturers. This reference enables component selection flexibility for procurement, supply chain continuity, and design optimization.

Substiute Parts

RCS3216F6192CS

Samsung Electro-MechanicsIn Stock: 891RCS3216F6192CS Datasheet

Current PartRFQ

CR1206-FX-6192ELF

Bourns Inc.In Stock: 26174CR1206-FX-6192ELF Datasheet

SimilarRFQ

CRCW120661K9FKEA

Vishay DaleIn Stock: 16431CRCW120661K9FKEA Datasheet

SimilarRFQ

ERJ-8ENF6192V

Panasonic Electronic ComponentsIn Stock: 22309ERJ-8ENF6192V Datasheet

SimilarRFQ

RC1206FR-0761K9L

YAGEOIn Stock: 41825RC1206FR-0761K9L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCS3216F6192CS is determined by strict equivalence across the following parameters:

Electrical Parameters:

• Resistance value: 61.9 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.25W / 1/4W (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)

Mechanical Parameters:

• Package type: 1206 (3216 Metric) (exact match required)
• Number of terminations: 2 (exact match required)
• Composition: Thick Film (exact match required)

Compliance Parameters:

• RoHS Status: ROHS3 Compliant (minimum requirement)
• REACH Status: REACH Unaffected (minimum requirement)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

All four substitute parts listed meet these criteria. Variations in physical dimensions (length, width, height) within the 1206 package specification and differences in secondary features (such as automotive AEC-Q200 certification or anti-sulfur coating) do not disqualify substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (Active Status):

CR1206-FX-6192ELF (Bourns Inc.), CRCW120661K9FKEA (Vishay Dale), and RC1206FR-0761K9L (YAGEO) are all classified as Active product status, indicating ongoing manufacturer support and availability for new designs. These three parts are suitable for new circuit designs and long-term production applications.

Secondary Selection (Legacy Status):

ERJ-8ENF6192V (Panasonic Electronic Components) carries "Not For New Designs" product status. This classification indicates the manufacturer has discontinued active development and support for this part number. While electrically and mechanically equivalent, this part should be selected only when existing inventory must be utilized or when design continuity with legacy systems is required.

Compliance Considerations:

All substitute parts maintain ROHS3 compliance and REACH Unaffected status, matching the environmental and regulatory requirements of the primary part RCS3216F6192CS. Selection among Active-status alternatives can proceed based on packaging format availability (Tape & Reel or Cut Tape), inventory levels, or secondary feature requirements such as automotive AEC-Q200 certification.

Frequently Asked Questions (FAQ)

Q: Can ERJ-8ENF6192V be used as a direct replacement for RCS3216F6192CS?

A: ERJ-8ENF6192V meets all electrical and mechanical substitution criteria. However, it carries "Not For New Designs" status. Use this part only when existing inventory constraints or legacy system compatibility necessitate its selection.

Q: What is the difference between the substitute parts in terms of physical dimensions?

A: All parts conform to the 1206 (3216 Metric) package specification. Minor variations exist in seated height: RCS3216F6192CS (0.66mm max), CR1206-FX-6192ELF (0.75mm max), CRCW120661K9FKEA (0.60mm max), ERJ-8ENF6192V (0.70mm max), and RC1206FR-0761K9L (0.65mm max). These variations remain within standard 1206 package tolerances and do not affect PCB layout or assembly compatibility.

Q: Are there packaging format differences among the substitute parts?

A: CR1206-FX-6192ELF, ERJ-8ENF6192V, and RC1206FR-0761K9L are supplied in Tape & Reel (TR) format. CRCW120661K9FKEA is available in Cut Tape (CT) & Digi-Reel® format. RCS3216F6192CS packaging format is not specified in the provided data. Confirm packaging requirements with procurement specifications before final part selection.

Q: Does CRCW120661K9FKEA automotive AEC-Q200 certification affect substitution eligibility?

A: AEC-Q200 certification is a secondary feature that does not disqualify substitution. CRCW120661K9FKEA can substitute for RCS3216F6192CS in non-automotive applications. In automotive applications, CRCW120661K9FKEA provides additional qualification assurance beyond the base electrical and mechanical equivalence.

Q: What inventory considerations should guide part selection?

A: Current inventory levels are: RCS3216F6192CS (847 Pcs), CR1206-FX-6192ELF (26,080 Pcs), CRCW120661K9FKEA (16,366 Pcs), ERJ-8ENF6192V (22,230 Pcs), RC1206FR-0761K9L (41,795 Pcs). Higher inventory availability in substitute parts may support extended production schedules and reduce lead time risk.

Q: Are all substitute parts suitable for the full -55°C to 155°C operating temperature range?

A: All parts, including substitutes, are rated for -55°C ~ 155°C operation with ±100ppm/°C temperature coefficient. No derating or thermal performance differences exist among the listed alternatives within this temperature range.