RCS3216F2432CS Equivalent & Substitute Parts

Part Overview

The RCS3216F2432CS is a 24.3 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant properties. The part is ROHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity rating.

Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package format, resistance value, tolerance, power rating, and operating temperature range. Alternative sources provide equivalent functionality for applications requiring component availability, supply chain flexibility, or specific certifications such as automotive AEC-Q200 qualification.

Substiute Parts

RCS3216F2432CS

Samsung Electro-MechanicsIn Stock: 830RCS3216F2432CS Datasheet

Current PartRFQ

CR1206-FX-2432ELF

Bourns Inc.In Stock: 20404CR1206-FX-2432ELF Datasheet

SimilarRFQ

CRCW120624K3FKEA

Vishay DaleIn Stock: 19074CRCW120624K3FKEA Datasheet

SimilarRFQ

ERJ-8ENF2432V

Panasonic Electronic ComponentsIn Stock: 47126ERJ-8ENF2432V Datasheet

SimilarRFQ

RC1206FR-0724K3L

YAGEOIn Stock: 30083RC1206FR-0724K3L Datasheet

SimilarRFQ

RMCF1206FT24K3

Stackpole Electronics IncIn Stock: 4455RMCF1206FT24K3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCS3216F2432CS is determined by strict equivalence across the following parameters:

Mandatory Equivalence Criteria:

• Resistance value: 24.3 kOhms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package format: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3
• Moisture sensitivity level: 1 (Unlimited)
• Termination count: 2

All identified substitute parts meet these criteria. Variations in physical dimensions (length, width, height) within the 1206 package specification, packaging format (Tape & Reel vs. Cut Tape), and optional certifications (such as automotive AEC-Q200) do not affect functional substitutability but may influence application suitability and procurement logistics.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (Active Status, Standard Applications): CR1206-FX-2432ELF (Bourns Inc.), RC1206FR-0724K3L (YAGEO), and RCS3216F2432CS (Samsung Electro-Mechanics) are recommended for general-purpose applications. All three maintain Active product status with equivalent electrical and mechanical specifications. Selection among these three is driven by procurement availability and packaging preference (Tape & Reel format).

Automotive Applications (AEC-Q200 Requirement): CRCW120624K3FKEA (Vishay Dale) and RMCF1206FT24K3 (Stackpole Electronics Inc) are qualified to automotive AEC-Q200 standard. These parts are suitable for automotive and industrial applications requiring enhanced reliability qualification. Both maintain Active product status.

Legacy or Inventory Clearance (Not For New Designs): ERJ-8ENF2432V (Panasonic Electronic Components) carries "Not For New Designs" product status. This part is electrically and mechanically equivalent but should not be selected for new product development. Use is limited to replacement or maintenance of existing systems where this part number is already established.

Compliance Verification: All substitute parts are ROHS3 compliant, REACH unaffected, and carry MSL Level 1 (Unlimited) moisture sensitivity rating, matching the original RCS3216F2432CS specification.

Frequently Asked Questions (FAQ)

Q: Can CRCW120624K3FKEA replace RCS3216F2432CS in non-automotive applications?

A: Yes. CRCW120624K3FKEA meets all electrical and mechanical equivalence criteria for the RCS3216F2432CS. The automotive AEC-Q200 certification is an additional qualification that does not restrict use in non-automotive applications. The part is electrically and mechanically identical.

Q: Why is ERJ-8ENF2432V marked "Not For New Designs"?

A: ERJ-8ENF2432V carries this designation from the manufacturer. While electrically and mechanically equivalent to RCS3216F2432CS, this part should not be selected for new product development. It is suitable only for replacement or maintenance of existing systems where this part number is already in use.

Q: Are there physical dimension differences between substitute parts?

A: Minor variations in seated height exist within the 1206 package specification. RCS3216F2432CS has maximum seated height of 0.026" (0.66mm), while CR1206-FX-2432ELF is 0.030" (0.75mm), CRCW120624K3FKEA is 0.024" (0.60mm), ERJ-8ENF2432V is 0.028" (0.70mm), RC1206FR-0724K3L is 0.026" (0.65mm), and RMCF1206FT24K3 is 0.028" (0.70mm). These variations remain within 1206 package tolerance and do not affect PCB assembly compatibility.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is supplied on continuous carrier tape suitable for automated pick-and-place assembly. Cut Tape (CT) & Digi-Reel® packaging is pre-cut and presented in smaller quantities. Both formats contain identical components; packaging selection depends on production volume and assembly equipment capability.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All identified substitute parts, including RCS3216F2432CS, CR1206-FX-2432ELF, CRCW120624K3FKEA, ERJ-8ENF2432V, RC1206FR-0724K3L, and RMCF1206FT24K3, are ROHS3 compliant and REACH unaffected.

Q: Can I use RMCF1206FT24K3 in place of RCS3216F2432CS for general industrial applications?

A: Yes. RMCF1206FT24K3 is electrically and mechanically equivalent to RCS3216F2432CS. The automotive AEC-Q200 certification provides additional reliability assurance suitable for industrial applications. The part maintains Active product status and all required compliance certifications.