RCS3216F2260CS Equivalent & Substitute Parts

Part Overview

The RCS3216F2260CS is a 226 Ohm ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant properties. The part is ROHS3 compliant and operates across -55°C to 155°C temperature range with MSL 1 (Unlimited) moisture sensitivity rating.

Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and package compatibility. Substitutes maintain identical resistance value, tolerance, power rating, and thermal characteristics while originating from alternative manufacturers.

Substiute Parts

RCS3216F2260CS

Samsung Electro-MechanicsIn Stock: 1038RCS3216F2260CS Datasheet

Current PartRFQ

AC1206FR-07226RL

YAGEOIn Stock: 1095AC1206FR-07226RL Datasheet

SimilarRFQ

CR1206-FX-2260ELF

Bourns Inc.In Stock: 24675CR1206-FX-2260ELF Datasheet

SimilarRFQ

CRCW1206226RFKEA

Vishay DaleIn Stock: 14788CRCW1206226RFKEA Datasheet

SimilarRFQ

ERJ-8ENF2260V

Panasonic Electronic ComponentsIn Stock: 416385ERJ-8ENF2260V Datasheet

SimilarRFQ

RC1206FR-07226RL

YAGEOIn Stock: 261934RC1206FR-07226RL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCS3216F2260CS is determined by strict equivalence across the following parameters:

Mandatory Matching Parameters:

• Resistance Value: 226 Ohms
• Tolerance: ±1%
• Power Rating: 0.25W (1/4W)
• Package / Case: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Number of Terminations: 2
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

All identified substitute parts meet these mandatory criteria. Variations in physical dimensions (length, width, height) within standard tolerances and differences in packaging format (Tape & Reel vs. Cut Tape) do not affect functional substitutability. Automotive AEC-Q200 certification on certain substitutes represents an additional qualification level and does not preclude substitution in non-automotive applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Product Status):

The following parts are recommended as direct substitutes for the RCS3216F2260CS due to Active product status and full compliance with all mandatory electrical and mechanical parameters:

• AC1206FR-07226RL (YAGEO): Active status with Automotive AEC-Q200 qualification. Suitable for applications requiring automotive-grade reliability.
• CR1206-FX-2260ELF (Bourns Inc.): Active status with highest inventory availability (24,613 pcs). Established manufacturer with consistent supply.
• CRCW1206226RFKEA (Vishay Dale): Active status with Automotive AEC-Q200 qualification. Lowest seated height specification (0.024").
• RC1206FR-07226RL (YAGEO): Active status with highest inventory availability (261,907 pcs). Established supply chain presence.

Secondary Substitute (Legacy Status):

• ERJ-8ENF2260V (Panasonic Electronic Components): Marked as "Not For New Designs" but functionally equivalent. Suitable only for replacement or repair of existing assemblies. Highest inventory availability (416,331 pcs) for legacy system support.

All substitutes maintain identical electrical performance and thermal characteristics. Selection between active substitutes depends on supply chain requirements, packaging format preference, and automotive qualification necessity.

Frequently Asked Questions (FAQ)

Q: Can AC1206FR-07226RL replace RCS3216F2260CS in any application?

A: Yes. AC1206FR-07226RL meets all mandatory electrical and mechanical parameters. The Automotive AEC-Q200 qualification on AC1206FR-07226RL represents an additional certification level and does not restrict use in non-automotive applications.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is supplied on continuous tape for automated assembly processes. Cut Tape (CT) is supplied in shorter tape segments. Both formats contain identical components; packaging format selection depends on assembly equipment compatibility and order quantity requirements.

Q: Why is ERJ-8ENF2260V marked "Not For New Designs"?

A: This designation indicates the manufacturer has discontinued active development and recommends alternative parts for new product designs. ERJ-8ENF2260V remains functionally equivalent and is suitable for replacement in existing assemblies or legacy system support.

Q: Are there dimensional differences between substitute parts?

A: Minor dimensional variations exist within standard tolerances. Length ranges from 0.122" to 0.126" (3.10mm to 3.20mm). Height ranges from 0.024" to 0.030" (0.60mm to 0.75mm). These variations do not affect electrical performance or PCB assembly compatibility for standard 1206 footprints.

Q: Do all substitutes have identical moisture sensitivity ratings?

A: Yes. All listed substitutes maintain MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.

Q: Which substitute offers the best supply availability?

A: RC1206FR-07226RL (YAGEO) offers the highest documented inventory at 261,907 pcs. ERJ-8ENF2260V (Panasonic) offers 416,331 pcs but is marked "Not For New Designs."

Q: Can substitutes be mixed in the same assembly?

A: Yes. All substitutes are electrically and mechanically equivalent. Mixed sourcing from multiple manufacturers is permissible provided all parts meet the specified parameters and compliance requirements.