RCS3216F160CS Equivalent & Substitute Parts

Part Overview

The RCS3216F160CS is a 16 Ohm ±1% 0.25W (1/4W) thick film chip resistor manufactured by Samsung Electro-Mechanics in the 1206 (3216 Metric) package. This component features anti-sulfur and moisture-resistant construction, operating across the temperature range of -55°C to 155°C. The part maintains Active product status with 1153 units in current inventory.

Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component. This reference enables direct component selection for applications requiring 16 Ohm resistors with 1% tolerance in 1206 surface-mount packages.

Substiute Parts

RCS3216F160CS

Samsung Electro-MechanicsIn Stock: 1199RCS3216F160CS Datasheet

Current PartRFQ

AC1206FR-0716RL

YAGEOIn Stock: 6167AC1206FR-0716RL Datasheet

SimilarRFQ

CR1206-FX-16R0ELF

Bourns Inc.In Stock: 25906CR1206-FX-16R0ELF Datasheet

SimilarRFQ

CRCW120616R0FKEA

Vishay DaleIn Stock: 14168CRCW120616R0FKEA Datasheet

SimilarRFQ

ERJ-8ENF16R0V

Panasonic Electronic ComponentsIn Stock: 90162ERJ-8ENF16R0V Datasheet

SimilarRFQ

ERJ-P08F16R0V

Panasonic Electronic ComponentsIn Stock: 33033ERJ-P08F16R0V Datasheet

SimilarRFQ

RC1206FR-0716RL

YAGEOIn Stock: 119425RC1206FR-0716RL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RCS3216F160CS are classified based on strict electrical and mechanical parameter alignment. The following criteria determine substitution eligibility:

Primary Substitution Criteria:

• Resistance value: 16 Ohms
• Tolerance: ±1%
• Power rating: 0.25W (1/4W)
• Package: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

Substitute Categories:

Category A - Direct Equivalents (Identical Specifications): Parts meeting all primary criteria with no deviations in electrical or mechanical parameters.

Category B - Enhanced Specifications (Higher Power Rating): Parts with identical electrical specifications but higher power ratings (0.667W / 2/3W). These provide additional thermal margin and are suitable for applications where the original 0.25W rating is sufficient but higher power capability is available.

Category C - Automotive-Qualified Variants: Parts with AEC-Q200 automotive qualification in addition to standard specifications. These are suitable for both general industrial and automotive applications.

Parameter Comparison

Engineering Selection Recommendations

For New Designs: Select from parts with Active product status: AC1206FR-0716RL, CR1206-FX-16R0ELF, CRCW120616R0FKEA, ERJ-P08F16R0V, or RC1206FR-0716RL. All maintain current manufacturing support and full compliance certifications.

For Automotive Applications: AC1206FR-0716RL, CRCW120616R0FKEA, and ERJ-P08F16R0V carry AEC-Q200 automotive qualification. These parts are suitable for automotive-grade circuit implementations.

For Higher Thermal Margin: ERJ-P08F16R0V provides 0.667W (2/3W) power rating while maintaining identical electrical specifications. This part is suitable when additional thermal headroom is required within the same package footprint.

Avoid for New Designs: ERJ-8ENF16R0V carries "Not For New Designs" status and should not be selected for new circuit implementations, though it remains available for legacy system support.

Compliance Verification: All listed substitutes maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching the original RCS3216F160CS specifications.

Frequently Asked Questions (FAQ)

Q: Can AC1206FR-0716RL directly replace RCS3216F160CS? A: Yes. AC1206FR-0716RL meets all electrical specifications (16 Ohms ±1%, 0.25W), operates across the same temperature range (-55°C ~ 155°C), uses identical 1206 package, and maintains equivalent RoHS3 and MSL ratings. The addition of AEC-Q200 automotive qualification does not prevent use in general industrial applications.

Q: What is the difference between CR1206-FX-16R0ELF and CRCW120616R0FKEA? A: Both parts share identical electrical specifications and package. CR1206-FX-16R0ELF is manufactured by Bourns Inc. and features moisture resistance. CRCW120616R0FKEA is manufactured by Vishay Dale and includes AEC-Q200 automotive qualification. Selection depends on supplier availability and application requirements.

Q: Why is ERJ-P08F16R0V listed as a substitute if it has higher power rating? A: ERJ-P08F16R0V maintains all electrical specifications (16 Ohms ±1%, ±100ppm/°C, -55°C ~ 155°C) and package dimensions (1206) required for substitution. The higher 0.667W power rating provides additional thermal capability without affecting circuit operation in applications requiring 0.25W or less. This part is suitable when thermal margin is beneficial.

Q: Should ERJ-8ENF16R0V be used in new circuit designs? A: No. ERJ-8ENF16R0V carries "Not For New Designs" product status. This designation indicates the manufacturer is transitioning away from this part. For new designs, select from parts with Active status: AC1206FR-0716RL, CR1206-FX-16R0ELF, CRCW120616R0FKEA, ERJ-P08F16R0V, or RC1206FR-0716RL.

Q: Are all substitute parts available in Tape & Reel (TR) packaging? A: Yes. All listed substitute parts are supplied in Tape & Reel packaging, suitable for automated assembly processes.

Q: What is the significance of MSL 1 (Unlimited) rating? A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity limitations. These parts do not require special moisture-controlled storage or handling procedures and can be stored under standard industrial conditions indefinitely.

Q: Can I use RC1206FR-0716RL instead of RCS3216F160CS? A: Yes. RC1206FR-0716RL is a direct electrical equivalent with 16 Ohms ±1%, 0.25W power rating, 1206 package, and identical temperature specifications. Both parts feature moisture resistance and maintain ROHS3 compliance. RC1206FR-0716RL has higher inventory availability (119,343 units).