RCS3216F153CS Equivalent & Substitute Parts Reference

Part Overview

The RCS3216F153CS is a 15 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant properties. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and environmental ratings to ensure direct functional replacement in circuit applications.

Substiute Parts

RCS3216F153CS

Samsung Electro-MechanicsIn Stock: 720RCS3216F153CS Datasheet

Current PartRFQ

AC1206FR-0715KL

YAGEOIn Stock: 44809AC1206FR-0715KL Datasheet

SimilarRFQ

CR1206-FX-1502ELF

Bourns Inc.In Stock: 35388CR1206-FX-1502ELF Datasheet

SimilarRFQ

CRCW120615K0FKEA

Vishay DaleIn Stock: 88133CRCW120615K0FKEA Datasheet

SimilarRFQ

CRCW120615K0FKEAHP

Vishay DaleIn Stock: 40028CRCW120615K0FKEAHP Datasheet

SimilarRFQ

RC1206FR-0715KL

YAGEOIn Stock: 39689RC1206FR-0715KL Datasheet

SimilarRFQ

RMCF1206FT15K0

Stackpole Electronics IncIn Stock: 172432RMCF1206FT15K0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RCS3216F153CS are qualified based on the following criteria:

Primary Matching Parameters:

• Resistance value: 15 kOhms
• Tolerance: ±1%
• Package / Case: 1206 (3216 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Secondary Consideration:

• Power rating: 0.25W (1/4W) for direct equivalents; 0.75W (3/4W) for higher power applications

All substitute parts listed maintain identical electrical characteristics and environmental compliance. Dimensional variations within the 1206 package specification are acceptable for PCB assembly compatibility.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain full electrical and environmental compliance with the RCS3216F153CS. Selection among equivalents is determined by:

Direct Equivalents (0.25W Power Rating):

• AC1206FR-0715KL (YAGEO): Automotive AEC-Q200 rated
• CR1206-FX-1502ELF (Bourns Inc.): Standard industrial grade
• CRCW120615K0FKEA (Vishay Dale): Automotive AEC-Q200 rated
• RC1206FR-0715KL (YAGEO): Standard industrial grade
• RMCF1206FT15K0 (Stackpole Electronics Inc): Automotive AEC-Q200 rated

Higher Power Alternative (0.75W Power Rating):

• CRCW120615K0FKEAHP (Vishay Dale): Automotive AEC-Q200 rated with pulse withstanding capability

For automotive applications requiring AEC-Q200 certification, select from AC1206FR-0715KL, CRCW120615K0FKEA, or RMCF1206FT15K0. For standard industrial applications, CR1206-FX-1502ELF or RC1206FR-0715KL are suitable. The CRCW120615K0FKEAHP variant provides increased power dissipation capacity when circuit requirements exceed 0.25W.

Frequently Asked Questions (FAQ)

Q: Can CRCW120615K0FKEAHP (0.75W) be used as a direct replacement for RCS3216F153CS (0.25W)?

A: Yes. The 0.75W part is electrically and mechanically compatible. It provides additional power dissipation margin and maintains all other specifications. No circuit modification is required.

Q: Are all substitute parts compatible with the same PCB footprint?

A: Yes. All parts use the 1206 (3216 Metric) package. Dimensional variations (length 3.10mm to 3.20mm, height 0.60mm to 0.75mm) fall within standard 1206 PCB pad tolerances and present no assembly issues.

Q: What is the difference between automotive AEC-Q200 rated and standard industrial grade substitutes?

A: AEC-Q200 rated parts (AC1206FR-0715KL, CRCW120615K0FKEA, RMCF1206FT15K0) undergo additional qualification testing for automotive applications. Standard industrial parts (CR1206-FX-1502ELF, RC1206FR-0715KL) meet general industrial requirements. Selection depends on application environment.

Q: Do all substitutes have identical moisture resistance properties?

A: All listed parts maintain MSL 1 (Unlimited) rating. The RCS3216F153CS specifies anti-sulfur and moisture-resistant properties; substitute parts specify moisture-resistant properties. Both classifications ensure equivalent environmental protection.

Q: Is packaging format (Tape & Reel vs. Cut Tape) a substitution factor?

A: No. Packaging format affects supply and handling only, not electrical or mechanical compatibility. Parts are functionally equivalent regardless of packaging configuration.