RCS3216F1332CS Equivalent & Substitute Parts Reference

Part Overview

The RCS3216F1332CS is a 13.3 kOhms ±1% 0.25W (1/4W) thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant characteristics. The part operates across -55°C to 155°C temperature range and complies with ROHS3 standards.

Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package form factor and performance envelope. This reference provides qualified alternatives from established manufacturers for component selection and procurement planning.

Key Parameters

Parameter	Specification
Resistance Value	13.3 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level (MSL)	1 (Unlimited)
RoHS Status	ROHS3 Compliant
Number of Terminations	2

Substitute Part Grouping Explanation

Substitution eligibility for the RCS3216F1332CS is determined by strict equivalence across the following parameters:

Primary Substitution Criteria:

Resistance value: 13.3 kOhms
Tolerance: ±1%
Package form factor: 1206 (3216 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C
Moisture sensitivity level: 1 (Unlimited)
RoHS compliance: ROHS3 Compliant

Power Rating Consideration: Parts are grouped into two categories based on power dissipation capability:

Direct equivalents (0.25W / 1/4W): AC1206FR-0713K3L, CR1206-FX-1332ELF, CRCW120613K3FKEA, ERJ-8ENF1332V, RC1206FR-0713K3L
Higher power variant (0.75W / 3/4W): CRCW120613K3FKEAHP (suitable for applications requiring increased power handling within the same package)

All substitute parts maintain identical electrical performance specifications and mechanical compatibility with the original part number.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Package	Temp Coeff	Operating Temp	MSL	RoHS Status	Product Status	Packaging Type
RCS3216F1332CS	Samsung Electro-Mechanics	13.3 kOhms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	1	ROHS3	Active	-
AC1206FR-0713K3L	YAGEO	13.3 kOhms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	1	ROHS3	Active	Tape & Reel
CR1206-FX-1332ELF	Bourns Inc.	13.3 kOhms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	1	ROHS3	Active	Tape & Reel
CRCW120613K3FKEA	Vishay Dale	13.3 kOhms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	1	ROHS3	Active	Tape & Reel
CRCW120613K3FKEAHP	Vishay Dale	13.3 kOhms	±1%	0.75W	1206	±100ppm/°C	-55°C ~ 155°C	1	ROHS3	Active	Tape & Reel
ERJ-8ENF1332V	Panasonic Electronic Components	13.3 kOhms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	1	ROHS3	Not For New Designs	Tape & Reel
RC1206FR-0713K3L	YAGEO	13.3 kOhms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	1	ROHS3	Active	Cut Tape & Digi-Reel

Engineering Selection Recommendations

For Active Product Development: Select from parts with Active product status: AC1206FR-0713K3L, CR1206-FX-1332ELF, CRCW120613K3FKEA, RC1206FR-0713K3L, or CRCW120613K3FKEAHP. These parts are supported for new designs and carry full manufacturer backing.

For Automotive Applications: Parts rated AEC-Q200 (AC1206FR-0713K3L, CRCW120613K3FKEA, CRCW120613K3FKEAHP, ERJ-8ENF1332V) meet automotive qualification standards and are suitable for automotive-grade circuit implementations.

For Standard Industrial Applications: All listed substitutes maintain equivalent electrical and thermal performance. Selection may be based on packaging preference (Tape & Reel versus Cut Tape) and supplier availability.

Regarding ERJ-8ENF1332V: This part carries "Not For New Designs" status. While electrically and mechanically equivalent, it is not recommended for new product development. Existing designs using this part number may continue operation, but migration to active alternatives is advised for long-term supply chain stability.

Power Rating Consideration: CRCW120613K3FKEAHP provides 0.75W (3/4W) power rating in the same 1206 package. This variant is suitable for applications requiring higher power dissipation while maintaining identical resistance, tolerance, and temperature characteristics.

Frequently Asked Questions (FAQ)

Q: Can I substitute RCS3216F1332CS with any of the listed parts without circuit redesign?

A: Yes. All listed parts with 0.25W power rating (AC1206FR-0713K3L, CR1206-FX-1332ELF, CRCW120613K3FKEA, ERJ-8ENF1332V, RC1206FR-0713K3L) are direct electrical and mechanical equivalents. No circuit modifications are required. The 0.75W variant (CRCW120613K3FKEAHP) is also compatible but provides higher power handling capability.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging is supplied on continuous carrier tape suitable for automated pick-and-place assembly equipment. Cut Tape & Digi-Reel packaging provides the same components in smaller quantities on cut tape segments, typically for manual assembly or lower-volume applications. Electrical and mechanical specifications are identical; packaging choice depends on assembly process requirements.

Q: Why is ERJ-8ENF1332V marked "Not For New Designs"?

A: This designation indicates the manufacturer has discontinued active support for new product development. While the part remains electrically and mechanically equivalent and is currently in stock, it is not recommended for new circuit designs due to potential future supply discontinuation. For new designs, select from parts with Active status.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 Compliant status, meeting European Union Restriction of Hazardous Substances requirements. All parts are also REACH Unaffected and classified under ECCN EAR99.

Q: Can I use CRCW120613K3FKEAHP (0.75W) as a direct replacement for RCS3216F1332CS (0.25W)?

A: Yes. The 0.75W variant is mechanically and electrically compatible. It provides higher power dissipation capability within the same 1206 package form factor. This substitution is suitable for applications where increased thermal margin is beneficial. No circuit modifications are required.

Q: What is the Moisture Sensitivity Level (MSL) and why is it important?

A: MSL 1 (Unlimited) indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. This is the least restrictive moisture sensitivity classification and simplifies inventory management and assembly processes.

Q: Are there any dimensional differences between substitute parts?

A: Minor dimensional variations exist within the 1206 package specification. Length ranges from 0.122" to 0.126" (3.10mm to 3.20mm), and height ranges from 0.024" to 0.030" (0.60mm to 0.75mm). These variations remain within standard 1206 package tolerances and do not affect PCB layout or assembly compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message