RCS3216F1212CS Equivalent & Substitute Parts

Part Overview

The RCS3216F1212CS is a 12.1 kOhms ±1% 0.25W (1/4W) chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This thick film resistor features anti-sulfur and moisture-resistant properties with an operating temperature range of -55°C to 155°C. The part is currently active in production with 824 pieces in stock. Equivalent and substitute parts are necessary to address supply chain flexibility, alternative sourcing options, and specific application requirements such as automotive qualification or enhanced power ratings.

Key Parameters

Parameter	Value
Resistance	12.1 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Number of Terminations	2
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the RCS3216F1212CS is determined by the following critical parameters:

Primary Substitution Criteria:

Resistance value: 12.1 kOhms
Tolerance: ±1%
Package / Case: 1206 (3216 Metric)
Composition: Thick Film
Temperature Coefficient: ±100ppm/°C
Operating Temperature Range: -55°C ~ 155°C
Number of Terminations: 2

Secondary Considerations:

Power rating (0.25W minimum required; higher ratings acceptable)
RoHS compliance status
Moisture Sensitivity Level (MSL 1 required)
Regulatory compliance (REACH, ECCN)

All substitute parts listed meet the primary substitution criteria. Variations in physical dimensions (length, width, height) and packaging format (Tape & Reel vs. Cut Tape) do not affect electrical compatibility but may impact assembly and procurement workflows.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Package / Case	Temp Coeff (ppm/°C)	Operating Temp (°C)	RoHS Status	MSL	Product Status
RCS3216F1212CS	Samsung Electro-Mechanics	12.1 kOhms	±1%	0.25W	1206 (3216 Metric)	±100	-55 ~ 155	ROHS3 Compliant	1	Active
CR1206-FX-1212ELF	Bourns Inc.	12.1 kOhms	±1%	0.25W	1206 (3216 Metric)	±100	-55 ~ 155	ROHS3 Compliant	1	Active
CRCW120612K1FKEA	Vishay Dale	12.1 kOhms	±1%	0.25W	1206 (3216 Metric)	±100	-55 ~ 155	ROHS3 Compliant	1	Active
CRCW120612K1FKEAHP	Vishay Dale	12.1 kOhms	±1%	0.75W	1206 (3216 Metric)	±100	-55 ~ 155	ROHS3 Compliant	1	Active
CRCW120612K1FKTA	Vishay Dale	12.1 kOhms	±1%	0.25W	1206 (3216 Metric)	±100	-55 ~ 155	RoHS non-compliant	1	Active
ERJ-8ENF1212V	Panasonic Electronic Components	12.1 kOhms	±1%	0.25W	1206 (3216 Metric)	±100	-55 ~ 155	ROHS3 Compliant	1	Not For New Designs
RC1206FR-0712K1L	YAGEO	12.1 kOhms	±1%	0.25W	1206 (3216 Metric)	±100	-55 ~ 155	ROHS3 Compliant	1	Active
RMCF1206FT12K1	Stackpole Electronics Inc	12.1 kOhms	±1%	0.25W	1206 (3216 Metric)	±100	-55 ~ 155	ROHS3 Compliant	1	Active

Engineering Selection Recommendations

Preferred Substitutes (Active Status, ROHS3 Compliant):

The following parts are recommended as direct substitutes based on active product status and full ROHS3 compliance:

CR1206-FX-1212ELF (Bourns Inc.): Electrically and mechanically equivalent with moisture-resistant thick film composition. Highest inventory availability (20,177 pieces).
CRCW120612K1FKEA (Vishay Dale): Automotive AEC-Q200 qualified equivalent with active status and ROHS3 compliance. Suitable for applications requiring automotive-grade components.
RC1206FR-0712K1L (YAGEO): Moisture-resistant thick film equivalent with highest inventory availability (122,455 pieces) and active product status.
RMCF1206FT12K1 (Stackpole Electronics Inc): Automotive AEC-Q200 qualified equivalent with active status, ROHS3 compliance, and highest inventory availability (233,501 pieces).

Enhanced Power Rating Option:

CRCW120612K1FKEAHP (Vishay Dale): Provides 0.75W (3/4W) power rating with pulse withstanding capability while maintaining all other electrical parameters. Suitable for applications requiring higher power dissipation margin.

Conditional Substitutes:

CRCW120612K1FKTA (Vishay Dale): Electrically equivalent but RoHS non-compliant and REACH affected. Use only in applications where RoHS compliance is not required.
ERJ-8ENF1212V (Panasonic Electronic Components): ROHS3 compliant and automotive AEC-Q200 qualified but marked as "Not For New Designs." Use only for legacy system maintenance or replacement applications.

Frequently Asked Questions (FAQ)

Q: Can I substitute the RCS3216F1212CS with any of the listed parts without circuit redesign?

A: Yes. All listed substitute parts share identical electrical specifications (12.1 kOhms ±1%, 0.25W minimum, ±100ppm/°C, -55°C to 155°C operating range) and the same 1206 (3216 Metric) package footprint. No circuit redesign is required for direct substitution.

Q: What is the difference between the standard 0.25W and the CRCW120612K1FKEAHP 0.75W variant?

A: The CRCW120612K1FKEAHP provides three times the power rating (0.75W vs. 0.25W) with pulse withstanding capability. All other electrical parameters remain identical. This variant is suitable for applications requiring higher power dissipation or transient pulse tolerance. Physical dimensions are slightly different (3.10mm vs. 3.20mm length).

Q: Are all substitute parts RoHS compliant?

A: Most substitute parts are ROHS3 compliant. The exception is CRCW120612K1FKTA, which is RoHS non-compliant and REACH affected. Verify RoHS compliance requirements for your application before selection.

Q: What does "Not For New Designs" mean for the ERJ-8ENF1212V?

A: This designation indicates that Panasonic has discontinued active development and marketing of this part. While the part remains available in inventory (25,702 pieces), it is not recommended for new product designs. Use this part only for legacy system maintenance or replacement applications where supply continuity is not a concern.

Q: Do packaging format differences (Tape & Reel vs. Cut Tape) affect electrical performance?

A: No. Packaging format differences do not affect electrical performance or circuit compatibility. Packaging format selection depends on assembly process requirements and procurement workflow. Tape & Reel (TR) packaging is standard for automated assembly; Cut Tape (CT) is suitable for manual assembly or small-volume applications.

Q: Which substitute part has the highest inventory availability?

A: RMCF1206FT12K1 (Stackpole Electronics Inc) has the highest inventory availability with 233,501 pieces in stock. This part is automotive AEC-Q200 qualified, ROHS3 compliant, and active in production.

Q: Are automotive AEC-Q200 qualified parts required for my application?

A: Automotive AEC-Q200 qualification is required only for automotive applications or systems subject to automotive reliability standards. For general industrial or consumer applications, non-automotive qualified parts (such as CR1206-FX-1212ELF or RC1206FR-0712K1L) are acceptable and may offer cost advantages.

Q: What is the significance of the ±100ppm/°C temperature coefficient?

A: The ±100ppm/°C temperature coefficient indicates the maximum resistance change per degree Celsius across the operating temperature range (-55°C to 155°C). All listed parts share this specification, ensuring consistent thermal performance across the full operating range.

Q: Can I use a substitute part with different physical dimensions?

A: Physical dimension variations (length, width, height) are minor and do not affect PCB footprint compatibility for the 1206 (3216 Metric) package. All listed parts use the same footprint pattern. Verify specific assembly equipment clearance requirements if tight spacing constraints exist.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message