RCS3216F1132CS Equivalent & Substitute Parts Reference

Part Overview

The RCS3216F1132CS is a 11.3 kOhms ±1% 0.25W chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This thick film resistor features anti-sulfur and moisture-resistant properties, operating across -55°C to 155°C with a temperature coefficient of ±100ppm/°C. The part is RoHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity rating.

Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and environmental ratings align with the main part's functional requirements. Alternative sources provide design flexibility, supply chain redundancy, and component availability across different procurement channels.

Substiute Parts

RCS3216F1132CS

Samsung Electro-MechanicsIn Stock: 950RCS3216F1132CS Datasheet

Current PartRFQ

CR1206-FX-1132ELF

Bourns Inc.In Stock: 19748CR1206-FX-1132ELF Datasheet

SimilarRFQ

CRCW120611K3FKEA

Vishay DaleIn Stock: 10250CRCW120611K3FKEA Datasheet

SimilarRFQ

ERJ-8ENF1132V

Panasonic Electronic ComponentsIn Stock: 75539ERJ-8ENF1132V Datasheet

SimilarRFQ

RC1206FR-0711K3L

YAGEOIn Stock: 23060RC1206FR-0711K3L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment of the following parameters:

• Resistance Value: 11.3 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power Rating: 0.25W / 1/4W (exact match required)
• Package: 1206 (3216 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±100ppm/°C (exact match required)
• Operating Temperature Range: -55°C ~ 155°C (exact match required)
• RoHS Compliance: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

All identified substitute parts meet these criteria. Variations in physical dimensions (length, width, height) within standard tolerances and differences in packaging format (Tape & Reel vs. bulk) do not affect functional equivalence. Product status differences are noted for design phase considerations.

Parameter Comparison

Engineering Selection Recommendations

For Active Design Programs:

CR1206-FX-1132ELF (Bourns Inc.), CRCW120611K3FKEA (Vishay Dale), and RC1206FR-0711K3L (YAGEO) are all designated as Active products and are suitable for new design implementations. These three alternatives provide equivalent electrical and mechanical performance to the RCS3216F1132CS.

CRCW120611K3FKEA carries AEC-Q200 automotive qualification, making it the preferred selection for automotive applications requiring formal qualification documentation.

For Existing Production or Legacy Support:

RCS3216F1132CS (Samsung Electro-Mechanics) remains the primary specification. All four substitute parts provide direct functional equivalence for replacement or secondary sourcing scenarios.

Product Status Consideration:

ERJ-8ENF1132V (Panasonic Electronic Components) is designated "Not For New Designs." This part is suitable only for sustaining production, repair, or retrofit applications where the original specification must be maintained. New design programs should select from Active-status alternatives.

Frequently Asked Questions (FAQ)

Q: Can CR1206-FX-1132ELF replace RCS3216F1132CS in existing designs?

A: Yes. Both parts share identical electrical specifications (11.3 kOhms ±1%, 0.25W), identical package dimensions (1206 / 3216 Metric), and equivalent environmental ratings (RoHS3, MSL 1). Physical dimension variations (height: 0.66mm vs. 0.75mm) fall within standard PCB assembly tolerances and do not affect circuit performance or board layout.

Q: What is the difference between the Samsung and Vishay Dale versions?

A: The primary difference is AEC-Q200 automotive qualification on CRCW120611K3FKEA. Both parts meet identical electrical and mechanical specifications. CRCW120611K3FKEA is specified for automotive applications; RCS3216F1132CS is specified for general industrial use. Selection depends on application requirements.

Q: Why is ERJ-8ENF1132V marked "Not For New Designs"?

A: This designation indicates the part is in mature/legacy status. Panasonic continues to support existing production but does not recommend this part for new circuit designs. For new programs, select from Active-status alternatives: CR1206-FX-1132ELF, CRCW120611K3FKEA, or RC1206FR-0711K3L.

Q: Are all substitute parts available in Tape & Reel packaging?

A: CR1206-FX-1132ELF, CRCW120611K3FKEA, ERJ-8ENF1132V, and RC1206FR-0711K3L are all supplied in Tape & Reel (TR) format. RCS3216F1132CS packaging format is specified as "-" in the provided data. Confirm packaging requirements with procurement specifications before component selection.

Q: Do all parts meet moisture sensitivity requirements?

A: Yes. All five parts carry MSL Level 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Standard PCB assembly processes and storage conditions apply uniformly across all alternatives.

Q: What is the tolerance stack-up consideration for ±1% resistors?

A: All substitute parts maintain ±1% tolerance specification. Circuit designs accounting for ±1% tolerance in the RCS3216F1132CS will function identically with any substitute part listed. No tolerance re-analysis is required.