RCS3216F103CS Equivalent & Substitute Parts Reference

Part Overview

The RCS3216F103CS is a 10 kOhms ±1% 0.25W thick film chip resistor in 1206 (3216 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant characteristics. The part is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are necessary when the primary part experiences supply constraints, inventory limitations, or when design requirements necessitate alternative sourcing from qualified manufacturers. Substitute parts must maintain electrical equivalence in resistance value, tolerance, power rating, and mechanical compatibility while meeting the same environmental and compliance standards.

Key Parameters

Parameter	Value
Resistance	10 kOhms
Tolerance	±1%
Power Rating	0.25W (1/4W)
Package / Case	1206 (3216 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)
Number of Terminations	2

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Parameters:

Resistance value: 10 kOhms
Tolerance: ±1%
Package / Case: 1206 (3216 Metric)
Composition: Thick Film
Temperature Coefficient: ±100ppm/°C
Operating Temperature Range: -55°C ~ 155°C
Number of Terminations: 2

Acceptable Variation Parameters:

Power Rating: 0.25W (1/4W) is the baseline; higher power ratings (0.5W, 0.75W) are acceptable as they provide additional thermal margin
Packaging format: Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® are interchangeable based on assembly requirements
Manufacturer-specific features: Anti-Sulfur, Moisture Resistant, Automotive AEC-Q200 certifications are compatible enhancements

Compliance Considerations:

RoHS3 compliance is required for all substitutes
MSL 1 (Unlimited) rating is maintained across all qualified substitutes
REACH and ECCN classifications remain consistent

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Package	Temp Coeff	Operating Temp	RoHS Status	Features
RCS3216F103CS	Samsung Electro-Mechanics	10 kOhms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	Anti-Sulfur, Moisture Resistant
AF1206FR-0710KL	YAGEO	10 kOhms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	Anti-Sulfur, Automotive AEC-Q200
AC1206FR-0710KL	YAGEO	10 kOhms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	Automotive AEC-Q200, Moisture Resistant
CR1206-FX-1002ELF	Bourns Inc.	10 kOhms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	Moisture Resistant
CRCW120610K0FKEA	Vishay Dale	10 kOhms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	Automotive AEC-Q200
CRCW120610K0FKEAHP	Vishay Dale	10 kOhms	±1%	0.75W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	Automotive AEC-Q200, Pulse Withstanding
CRCW120610K0FKTA	Vishay Dale	10 kOhms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	RoHS non-compliant	Automotive AEC-Q200
ERJ-8ENF1002V	Panasonic Electronic Components	10 kOhms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	Automotive AEC-Q200
ERJ-S08F1002V	Panasonic Electronic Components	10 kOhms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	Anti-Sulfur, Automotive AEC-Q200
ESR18EZPF1002	Rohm Semiconductor	10 kOhms	±1%	0.5W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	Automotive AEC-Q200, Pulse Withstanding
KTR18EZPF1002	Rohm Semiconductor	10 kOhms	±1%	0.25W	1206	±100ppm/°C	-55°C ~ 155°C	ROHS3	Automotive AEC-Q200, High Voltage

Engineering Selection Recommendations

Primary Substitutes (Direct Equivalence):

AF1206FR-0710KL (YAGEO), AC1206FR-0710KL (YAGEO), CR1206-FX-1002ELF (Bourns Inc.), CRCW120610K0FKEA (Vishay Dale), ERJ-8ENF1002V (Panasonic), ERJ-S08F1002V (Panasonic), and KTR18EZPF1002 (Rohm Semiconductor) are direct electrical and mechanical equivalents. All maintain 10 kOhms ±1% resistance, 0.25W power rating, 1206 package, and ROHS3 compliance. These parts are suitable for one-to-one replacement in standard applications.

Enhanced Performance Substitutes (Higher Power Rating):

CRCW120610K0FKEAHP (Vishay Dale, 0.75W) and ESR18EZPF1002 (Rohm Semiconductor, 0.5W) provide increased power dissipation capability while maintaining all other electrical parameters. These are applicable when thermal margin enhancement is beneficial, provided PCB layout and thermal design accommodate the slightly different physical dimensions.

Restricted Substitutes:

CRCW120610K0FKTA (Vishay Dale) is not RoHS3 compliant and is marked as REACH Affected. This part is not recommended for new designs or applications requiring RoHS3 certification.

Product Status Consideration:

ERJ-8ENF1002V (Panasonic) is classified as "Not For New Designs." While electrically equivalent, this part should be avoided in new product development and reserved for legacy system maintenance only.

Frequently Asked Questions (FAQ)

Q: Can I substitute RCS3216F103CS with a higher power-rated resistor such as CRCW120610K0FKEAHP (0.75W)?

A: Yes. Higher power ratings provide additional thermal margin and are mechanically compatible within the 1206 package. The electrical characteristics (resistance, tolerance, temperature coefficient, operating range) remain identical. Verify that PCB layout and thermal design do not conflict with the slightly different physical dimensions (height difference of 0.036" maximum).

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® packaging?

A: Both packaging formats contain identical components. Tape & Reel is used for high-volume automated assembly. Cut Tape & Digi-Reel® is used for lower-volume or mixed-component assembly. Selection depends on assembly equipment and production volume requirements, not component performance.

Q: Are automotive-rated parts (AEC-Q200) suitable replacements for non-automotive applications?

A: Yes. Automotive AEC-Q200 certification indicates enhanced reliability testing and qualification. These parts exceed standard industrial requirements and are fully compatible with non-automotive applications. No performance degradation occurs.

Q: Why is CRCW120610K0FKTA not recommended despite electrical equivalence?

A: CRCW120610K0FKTA is not RoHS3 compliant and is marked as REACH Affected. If your application or supply chain requires RoHS3 certification, this part is not suitable. Verify compliance requirements before selection.

Q: Can I use ERJ-8ENF1002V in a new product design?

A: No. ERJ-8ENF1002V is classified as "Not For New Designs" by Panasonic. This designation indicates the manufacturer is phasing out this product line. Select alternative parts such as ERJ-S08F1002V (active status) or other qualified substitutes for new designs.

Q: What does ±100ppm/°C temperature coefficient mean for circuit performance?

A: Temperature coefficient specifies resistance change per degree Celsius. At ±100ppm/°C, a 10 kOhm resistor changes by approximately 1 Ohm per degree Celsius across the -55°C to 155°C operating range. All listed substitutes maintain this specification, ensuring consistent circuit behavior across temperature extremes.

Q: Are anti-sulfur and moisture-resistant features critical for substitution?

A: These features enhance reliability in harsh environments but are not mandatory for substitution. The RCS3216F103CS includes both features. Substitutes with these features (AF1206FR-0710KL, AC1206FR-0710KL, ERJ-S08F1002V) provide equivalent or superior environmental protection. Parts without these specific features (CR1206-FX-1002ELF, CRCW120610K0FKEA) remain electrically and mechanically compatible.

Q: What is MSL 1 (Unlimited) moisture sensitivity level?

A: MSL 1 indicates the component has unlimited shelf life and requires no special moisture-control handling during storage or assembly. All listed substitutes maintain MSL 1 rating, eliminating moisture-related assembly constraints.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message