RCS3216F100CS Equivalent & Substitute Parts Reference

Part Overview

The RCS3216F100CS is a 10 Ohm ±1% 0.25W (1/4W) thick film chip resistor manufactured by Samsung Electro-Mechanics in 1206 (3216 Metric) package format. This component features anti-sulfur and moisture-resistant construction with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). The part is currently in active production status with 968 pieces available in new original inventory.

Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and package compatibility are maintained across different manufacturers. Alternative sources become necessary for supply chain continuity, design flexibility, or when specific certifications or enhanced features are required for particular applications.

Key Parameters

Parameter	Value	Specification Basis
Resistance	10 Ohms	Core electrical specification
Tolerance	±1%	Precision requirement
Power Rating	0.25W (1/4W)	Thermal dissipation capacity
Package / Case	1206 (3216 Metric)	Physical footprint and mounting
Composition	Thick Film	Construction technology
Temperature Coefficient	±100ppm/°C	Stability over temperature range
Operating Temperature	-55°C ~ 155°C	Environmental operating limits
Terminations	2	Connection points
RoHS Status	ROHS3 Compliant	Environmental regulation compliance
Moisture Sensitivity Level	1 (Unlimited)	Handling and storage requirements

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict adherence to the following criteria:

Mandatory Matching Parameters:

Resistance value: 10 Ohms
Tolerance: ±1%
Package / Case: 1206 (3216 Metric)
Composition: Thick Film
Temperature Coefficient: ±100ppm/°C
Operating Temperature Range: -55°C ~ 155°C
Number of Terminations: 2
Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation Parameters:

Power Rating: Substitutes may equal or exceed 0.25W (higher power ratings are acceptable as they provide equal or superior thermal performance)
Manufacturer: Different manufacturers permitted
Packaging format: Cut Tape (CT), Digi-Reel®, or Tape & Reel (TR) formats are interchangeable
Additional features: Automotive AEC-Q200 certification, pulse withstanding capability, or enhanced moisture resistance are permissible enhancements

Non-Substitutable Variations:

Parts with power ratings below 0.25W
Different resistance values or tolerance specifications
Alternative package sizes or case codes
Incompatible temperature ranges

Seven substitute parts meet these criteria across manufacturers including Bourns Inc., Vishay Dale, Panasonic Electronic Components, Rohm Semiconductor, and Stackpole Electronics Inc.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	RoHS Status	Product Status	Inventory (Pcs)
RCS3216F100CS	Samsung Electro-Mechanics	10 Ω	±1%	0.25	1206	±100ppm/°C	-55 ~ 155°C	ROHS3	Active	968
CR1206-FX-10R0ELF	Bourns Inc.	10 Ω	±1%	0.25	1206	±100ppm/°C	-55 ~ 155°C	ROHS3	Active	204209
CRCW120610R0FKEA	Vishay Dale	10 Ω	±1%	0.25	1206	±100ppm/°C	-55 ~ 155°C	ROHS3	Active	65200
CRCW120610R0FKEAHP	Vishay Dale	10 Ω	±1%	0.75	1206	±100ppm/°C	-55 ~ 155°C	ROHS3	Active	2220
CRCW120610R0FKTA	Vishay Dale	10 Ω	±1%	0.25	1206	±100ppm/°C	-55 ~ 155°C	Non-compliant	Active	22083
ERJ-8ENF10R0V	Panasonic Electronic Components	10 Ω	±1%	0.25	1206	±100ppm/°C	-55 ~ 155°C	ROHS3	Not For New Designs	189593
ERJ-P08F10R0V	Panasonic Electronic Components	10 Ω	±1%	0.667	1206	±100ppm/°C	-55 ~ 155°C	ROHS3	Active	7363
ESR18EZPF10R0	Rohm Semiconductor	10 Ω	±1%	0.5	1206	±100ppm/°C	-55 ~ 155°C	ROHS3	Active	5363
RMCF1206FT10R0	Stackpole Electronics Inc	10 Ω	±1%	0.25	1206	±100ppm/°C	-55 ~ 155°C	ROHS3	Active	2955310

Engineering Selection Recommendations

Primary Substitutes (Recommended for New Designs):

RMCF1206FT10R0 (Stackpole Electronics Inc) is the preferred substitute based on active product status, ROHS3 compliance, extensive inventory availability (2,955,310 pieces), and matching electrical and mechanical specifications. This part maintains identical power rating, tolerance, and temperature characteristics while offering superior supply chain security.

CR1206-FX-10R0ELF (Bourns Inc.) serves as a secondary option with active status, ROHS3 compliance, and substantial inventory (204,209 pieces). This part is suitable for applications requiring moisture-resistant thick film construction without automotive certification requirements.

CRCW120610R0FKEA (Vishay Dale) is appropriate for automotive applications requiring AEC-Q200 certification. Active status and ROHS3 compliance are maintained with adequate inventory (65,200 pieces).

Enhanced Performance Alternatives:

CRCW120610R0FKEAHP (Vishay Dale) provides increased power rating (0.75W versus 0.25W) with automotive AEC-Q200 certification and pulse withstanding capability. This part is suitable for applications requiring higher thermal dissipation capacity while maintaining identical resistance and tolerance specifications.

ERJ-P08F10R0V (Panasonic Electronic Components) offers 0.667W power rating with automotive AEC-Q200 certification and pulse withstanding features. Active product status and ROHS3 compliance are confirmed.

ESR18EZPF10R0 (Rohm Semiconductor) provides 0.5W power rating with automotive AEC-Q200 certification and pulse withstanding capability. Active status and ROHS3 compliance are maintained.

Restricted Substitutes:

CRCW120610R0FKTA (Vishay Dale) is RoHS non-compliant and REACH affected. This part is not suitable for applications requiring environmental regulation compliance.

ERJ-8ENF10R0V (Panasonic Electronic Components) carries "Not For New Designs" status. This part is restricted to legacy system maintenance only and is unsuitable for new product development.

Frequently Asked Questions (FAQ)

Q: Can I substitute the RCS3216F100CS with a higher power-rated resistor such as CRCW120610R0FKEAHP (0.75W)?

A: Yes. Higher power ratings are acceptable substitutes because they provide equal or superior thermal performance. The 0.75W part will function identically in circuits designed for 0.25W operation. Physical dimensions remain within specification (1206 package), and all electrical parameters match the original part.

Q: What is the difference between Cut Tape (CT) and Tape & Reel (TR) packaging?

A: Both packaging formats contain identical components with different delivery methods. Cut Tape provides smaller quantities suitable for prototyping and low-volume assembly. Tape & Reel provides bulk quantities optimized for automated pick-and-place manufacturing. Electrical and mechanical specifications are identical between formats.

Q: Why is ERJ-8ENF10R0V marked "Not For New Designs"?

A: This designation indicates the manufacturer has discontinued active development and recommends alternative parts for new product designs. While the part remains functionally equivalent, it is restricted to legacy system maintenance and repair applications only.

Q: Are automotive-certified parts (AEC-Q200) compatible with non-automotive applications?

A: Yes. Automotive-certified parts exceed standard specifications and are fully compatible with non-automotive applications. AEC-Q200 certification indicates enhanced reliability testing and stricter quality requirements, making these parts suitable for any application requiring the specified electrical and mechanical characteristics.

Q: What does ROHS3 compliance mean for component selection?

A: ROHS3 compliance indicates the part meets Restriction of Hazardous Substances Directive requirements, restricting lead, cadmium, mercury, and other hazardous materials. ROHS3-compliant parts are required for most commercial and industrial applications. Non-compliant parts (such as CRCW120610R0FKTA) are restricted to legacy systems or applications where environmental regulations do not apply.

Q: Can I use CRCW120610R0FKTA as a substitute despite RoHS non-compliance?

A: No. RoHS non-compliance and REACH-affected status indicate this part does not meet current environmental regulations. Use of this part is restricted to legacy system maintenance where original specifications require it. New designs must use ROHS3-compliant alternatives.

Q: How do I determine which substitute is best for my application?

A: Selection depends on three factors: (1) Product status—use only Active or Active parts for new designs; (2) Compliance requirements—verify ROHS3 status and AEC-Q200 certification if automotive applications are involved; (3) Power requirements—select equal or higher power ratings. RMCF1206FT10R0 is recommended as the primary choice for most applications due to active status, compliance, and superior inventory availability.

Q: Are there dimensional differences between substitute parts?

A: All substitute parts use identical 1206 (3216 Metric) package specifications with length 0.126" (3.20mm) and width 0.063" (1.60mm). Height variations exist within acceptable limits (0.024" to 0.030" maximum seated height), which do not affect PCB assembly or circuit performance. Verify specific height requirements only if space constraints exist in your design.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message