RCS2012J753CS Equivalent & Substitute Parts Reference

Part Overview

The RCS2012J753CS is a 75 kOhms ±5% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant properties. The part is ROHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity rating.

Equivalent and substitute parts are identified based on matching electrical specifications (resistance value and power rating), mechanical compatibility (package dimensions), and environmental operating parameters. Substitute parts with improved tolerance or enhanced automotive qualification may be selected based on application requirements.

Key Parameters

Parameter	Value
Resistance	75 kOhms
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution logic is based on the following criteria:

Primary Compatibility Criteria:

Resistance value: 75 kOhms (exact match required)
Package: 0805 (2012 Metric) (exact match required)
Power rating: 0.125W minimum (equal or higher acceptable)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C ~ 155°C minimum

Tolerance Grouping:

Group A (±5% Tolerance): Direct equivalents with identical tolerance specification
Group B (±1% Tolerance): Improved tolerance substitutes with tighter specification
Group C (Higher Power Rating): Parts rated 0.5W (1/2W) with pulse withstanding capability

Compliance Considerations:

ROHS3 compliance status
REACH status (Unaffected vs. Affected)
Automotive AEC-Q200 qualification (where applicable)
Moisture Sensitivity Level 1 (Unlimited) maintained across all substitutes

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	Height Max (mm)	AEC-Q200	RoHS Status
RCS2012J753CS	Samsung Electro-Mechanics	75 kOhms	±5%	0.125	0805	±100ppm/°C	-55 to 155°C	0.66	No	ROHS3
AC0805FR-0775KL	YAGEO	75 kOhms	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.60	Yes	ROHS3
CRCW080575K0FKEA	Vishay Dale	75 kOhms	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.50	Yes	ROHS3
CRCW080575K0FKEAHP	Vishay Dale	75 kOhms	±1%	0.5	0805	±100ppm/°C	-55 to 155°C	0.60	Yes	ROHS3
CRCW080575K0FKTA	Vishay Dale	75 kOhms	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.50	Yes	Non-compliant
ERJ-6ENF7502V	Panasonic Electronic Components	75 kOhms	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.70	Yes	ROHS3
RC0805FR-0775KL	YAGEO	75 kOhms	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.60	No	ROHS3
RC0805JR-0775KL	YAGEO	75 kOhms	±5%	0.125	0805	±100ppm/°C	-55 to 155°C	0.60	No	ROHS3
RCS080575K0FKEA	Vishay Dale	75 kOhms	±1%	0.5	0805	±100ppm/°C	-55 to 155°C	0.50	Yes	ROHS3
RMCF0805FT75K0	Stackpole Electronics Inc	75 kOhms	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.65	Yes	ROHS3

Engineering Selection Recommendations

Direct Equivalent (±5% Tolerance Match): RC0805JR-0775KL (YAGEO) maintains identical tolerance specification to the RCS2012J753CS. This part is suitable for applications where tolerance matching is a primary requirement. Both parts are ROHS3 compliant with MSL Level 1 rating.

Improved Tolerance Substitutes (±1% Tolerance): Parts with ±1% tolerance provide tighter resistance specification than the original ±5% part. These include:

AC0805FR-0775KL (YAGEO) with AEC-Q200 automotive qualification
CRCW080575K0FKEA (Vishay Dale) with AEC-Q200 automotive qualification
ERJ-6ENF7502V (Panasonic) with AEC-Q200 automotive qualification
RC0805FR-0775KL (YAGEO) without automotive qualification
RMCF0805FT75K0 (Stackpole Electronics) with AEC-Q200 automotive qualification

All ±1% tolerance substitutes are ROHS3 compliant and maintain the -55°C to 155°C operating temperature range.

Higher Power Rating Substitutes (0.5W / 1/2W): For applications requiring increased power dissipation capability:

CRCW080575K0FKEAHP (Vishay Dale) with pulse withstanding capability and AEC-Q200 qualification
RCS080575K0FKEA (Vishay Dale) with pulse withstanding capability and AEC-Q200 qualification

These parts maintain 0805 package dimensions and are suitable for circuits with higher power requirements while preserving mechanical compatibility.

Compliance Consideration: CRCW080575K0FKTA (Vishay Dale) is RoHS non-compliant and REACH Affected. This part is not recommended for new designs or applications requiring regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can I substitute a ±1% tolerance part for the original ±5% part? A: Yes. A ±1% tolerance part provides tighter resistance specification and is electrically compatible. The ±1% tolerance is a subset of the ±5% tolerance range, making it a valid substitute for applications where the original tolerance was acceptable.

Q: Are all substitute parts mechanically compatible with the original RCS2012J753CS? A: All listed substitutes use the 0805 (2012 Metric) package with identical footprint dimensions (2.00mm L x 1.25mm W). Height variations range from 0.50mm to 0.70mm maximum seated height. Verify PCB layout clearance for components with maximum height of 0.70mm (ERJ-6ENF7502V).

Q: What is the difference between 0.125W and 0.5W rated parts? A: Power rating indicates maximum continuous power dissipation capability. A 0.5W part can dissipate four times more power than a 0.125W part. Select 0.5W parts only if circuit analysis confirms higher power dissipation requirements. Oversizing power rating does not improve performance in low-power applications.

Q: Which substitute parts have automotive qualification? A: The following parts carry AEC-Q200 automotive qualification: AC0805FR-0775KL, CRCW080575K0FKEA, CRCW080575K0FKEAHP, ERJ-6ENF7502V, RCS080575K0FKEA, and RMCF0805FT75K0. Select AEC-Q200 qualified parts for automotive or high-reliability applications.

Q: Is ROHS3 compliance required for my application? A: ROHS3 compliance is mandatory for products sold in the European Union and many other markets. All recommended substitutes except CRCW080575K0FKTA are ROHS3 compliant. Verify regulatory requirements for your target market before component selection.

Q: What does MSL Level 1 (Unlimited) mean? A: MSL Level 1 indicates the component has unlimited shelf life and does not require special moisture control during storage or handling. All listed parts maintain MSL Level 1 rating, eliminating moisture sensitivity concerns during assembly.

Q: Can I use parts with different height specifications interchangeably? A: Yes, within the 0805 package family. Height variations (0.50mm to 0.70mm) do not affect electrical performance or PCB footprint compatibility. Verify clearance above components for applications with height-constrained layouts.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message