RCS2012J513CS 51kΩ 0805 Chip Resistor Equivalent & Substitute Parts

Part Overview

The RCS2012J513CS is a 51 kOhms ±5% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant construction. The part is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1) and operates across -55°C to 155°C temperature range. Equivalent and substitute parts are identified based on matching resistance value, package format, and electrical performance parameters within specified tolerance and power rating ranges.

Key Parameters

Parameter	Value	Specification Basis
Resistance	51 kOhms	Core electrical specification
Tolerance	±5%	Accuracy classification
Power Rating	0.125W (1/8W)	Thermal dissipation capacity
Package / Case	0805 (2012 Metric)	Physical form factor
Composition	Thick Film	Construction technology
Temperature Coefficient	±100ppm/°C	Stability over temperature
Operating Temperature Range	-55°C to 155°C	Environmental limits
RoHS Status	ROHS3 Compliant	Regulatory compliance
Moisture Sensitivity Level	MSL 1 (Unlimited)	Handling and storage

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict adherence to the following parameters:

Primary Matching Criteria (Mandatory):

Resistance value: 51 kOhms
Package format: 0805 (2012 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C to 155°C
Moisture sensitivity level: MSL 1

Secondary Compatibility Parameters (Allowable Variation):

Tolerance: ±5% (main part) to ±1% (substitute acceptable—tighter tolerance is compatible)
Power rating: 0.125W minimum (higher ratings acceptable for same package)
Packaging format: Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel® (both acceptable)
RoHS status: ROHS3 compliant preferred; non-compliant parts noted separately
Certifications: AEC-Q200 automotive rating is additional qualification, not required for substitution

Non-Substitutable Variations:

Different resistance values
Different package sizes
Power ratings below 0.125W
Operating temperature ranges narrower than -55°C to 155°C
Composition types other than thick film

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	RoHS Status	Packaging Type
RCS2012J513CS	Samsung Electro-Mechanics	51 kΩ	±5%	0.125	0805	±100ppm/°C	-55 to 155°C	ROHS3	Tape & Reel
AC0805FR-0751KL	YAGEO	51 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	ROHS3	Cut Tape & Digi-Reel
AC0805JR-0751KL	YAGEO	51 kΩ	±5%	0.125	0805	±100ppm/°C	-55 to 155°C	ROHS3	Tape & Reel
CRCW080551K0FKEA	Vishay Dale	51 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	ROHS3	Tape & Reel
CRCW080551K0FKEAHP	Vishay Dale	51 kΩ	±1%	0.5	0805	±100ppm/°C	-55 to 155°C	ROHS3	Tape & Reel
CRCW080551K0FKTA	Vishay Dale	51 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	RoHS Non-Compliant	Tape & Reel
ERJ-6ENF5102V	Panasonic Electronic Components	51 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	ROHS3	Tape & Reel
ESR10EZPF5102	Rohm Semiconductor	51 kΩ	±1%	0.4	0805	±100ppm/°C	-55 to 155°C	ROHS3	Tape & Reel
RC0805FR-0751KL	YAGEO	51 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	ROHS3	Cut Tape & Digi-Reel
RC0805JR-0751KL	YAGEO	51 kΩ	±5%	0.125	0805	±100ppm/°C	-55 to 155°C	ROHS3	Cut Tape & Digi-Reel
RCS080551K0FKEA	Vishay Dale	51 kΩ	±1%	0.5	0805	±100ppm/°C	-55 to 155°C	ROHS3	Tape & Reel

Engineering Selection Recommendations

Direct Equivalents (Identical Tolerance and Power Rating):

AC0805JR-0751KL and RC0805JR-0751KL are direct functional equivalents to RCS2012J513CS, both rated at 51 kOhms ±5% 0.125W in 0805 package with ROHS3 compliance and MSL 1 rating. These parts are interchangeable without circuit redesign considerations.

Upgraded Tolerance Substitutes (±1% Tolerance):

AC0805FR-0751KL, CRCW080551K0FKEA, CRCW080551K0FKTA, ERJ-6ENF5102V, RC0805FR-0751KL, and RCS080551K0FKEA all provide tighter tolerance (±1%) while maintaining 51 kOhms resistance, 0.125W power rating, and 0805 package. Tighter tolerance is a performance enhancement and does not create incompatibility. CRCW080551K0FKTA is noted as RoHS non-compliant and REACH affected; use only where regulatory exemption applies.

Higher Power Rating Substitutes (0.4W or 0.5W):

CRCW080551K0FKEAHP, ESR10EZPF5102, and RCS080551K0FKEA provide increased power dissipation capacity (0.5W or 0.4W) while maintaining all other core parameters. These are suitable for applications requiring thermal margin or pulse withstanding capability. Physical dimensions remain within 0805 package specification.

Compliance Considerations:

All recommended substitutes maintain ROHS3 compliance except CRCW080551K0FKTA. All parts carry MSL 1 (unlimited) moisture sensitivity rating. Automotive-rated parts (AC series, CRCW series, ERJ-6EN series, ESR series) include AEC-Q200 certification as additional qualification.

Packaging Format Selection:

Tape & Reel (TR) packaging is standard for high-volume assembly. Cut Tape (CT) & Digi-Reel® format (YAGEO AC and RC series) is suitable for lower-volume or mixed-component applications. Selection depends on procurement and assembly process requirements, not electrical performance.

Frequently Asked Questions (FAQ)

Q: Can I substitute a ±1% tolerance part for the ±5% RCS2012J513CS?

A: Yes. Tighter tolerance (±1%) is a performance upgrade and maintains circuit compatibility. The substitute part will operate within the original ±5% specification window while providing superior accuracy.

Q: Are higher power-rated parts (0.4W or 0.5W) compatible in the same 0805 footprint?

A: Yes. CRCW080551K0FKEAHP, ESR10EZPF5102, and RCS080551K0FKEA maintain 0805 (2012 Metric) package dimensions and are mechanically and electrically compatible. Higher power rating provides additional thermal capacity without affecting circuit operation.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel packaging?

A: Both formats contain identical components. Tape & Reel (TR) is continuous reel format for automated high-speed assembly. Cut Tape (CT) & Digi-Reel® is pre-cut tape format suitable for lower-volume or mixed-component pick-and-place operations. Electrical and mechanical specifications are identical.

Q: Is CRCW080551K0FKTA suitable for my application?

A: CRCW080551K0FKTA is RoHS non-compliant and REACH affected. Use only if your application or regulatory jurisdiction permits non-compliant components. All other listed substitutes are ROHS3 compliant.

Q: Do automotive-rated parts (AEC-Q200) work in non-automotive applications?

A: Yes. AEC-Q200 certification indicates additional qualification testing and reliability screening. Automotive-rated parts are fully compatible in non-automotive circuits and provide enhanced reliability margin.

Q: What is the temperature coefficient specification and why does it matter?

A: All listed parts maintain ±100ppm/°C temperature coefficient across the -55°C to 155°C operating range. This specification ensures resistance value stability over temperature variations. All substitutes match this parameter.

Q: Can I use these parts interchangeably on the same PCB assembly?

A: Yes, within the constraints of your procurement and assembly process. All listed substitutes are mechanically and electrically compatible with RCS2012J513CS. Verify packaging format (TR vs. CT) matches your assembly equipment capability.

Q: What does MSL 1 (Unlimited) moisture sensitivity mean?

A: MSL 1 indicates the component requires no special moisture control during storage or handling. All listed substitutes carry MSL 1 rating, eliminating moisture-related handling restrictions.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message