RCS2012J241CS Equivalent & Substitute Parts

Part Overview

The RCS2012J241CS is a 240 Ohm ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.125W (1/8W) in the 0805 (2012 Metric) package. This component features anti-sulfur and moisture-resistant properties with a temperature coefficient of ±100ppm/°C and operates across the -55°C to 155°C temperature range. The part is ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating and maintains Active product status. Equivalent and substitute parts are identified to support procurement flexibility, design optimization, and supply chain continuity when the primary part becomes unavailable or when design requirements necessitate alternative specifications such as improved tolerance or enhanced power ratings.

Key Parameters

Parameter	Value
Resistance	240 Ohms
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the RCS2012J241CS is determined by strict equivalence across the following critical parameters: resistance value (240 Ohms), package type (0805/2012 Metric), composition (thick film), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C to 155°C). Substitute parts are grouped into two categories based on tolerance specification:

Category 1: Direct Tolerance Match (±5%) Parts maintaining the original ±5% tolerance specification: AC0805JR-07240RL (YAGEO) and RC0805JR-07240RL (YAGEO). These provide direct functional equivalence with identical electrical performance characteristics.

Category 2: Improved Tolerance (±1%) Parts offering tighter tolerance specifications (±1%) while maintaining all other core parameters: AC0805FR-07240RL (YAGEO), CRCW0805240RFKEA (Vishay Dale), CRCW0805240RFKTA (Vishay Dale), ERJ-6ENF2400V (Panasonic), RC0805FR-07240RL (YAGEO), and RMCF0805FT240R (Stackpole). These parts are suitable for applications requiring enhanced precision without changing the fundamental design.

Category 3: Enhanced Power Rating (0.5W/1/2W) Parts with increased power dissipation capability: CRCW0805240RFKEAHP (Vishay Dale) and RCS0805240RFKEA (Vishay Dale). These are suitable for applications requiring higher power handling while maintaining the 0805 package footprint.

All substitute parts share the same package dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm), two terminations, MSL 1 rating, and ROHS3 compliance status.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Temp Range	Features	RoHS Status	MSL
RCS2012J241CS	Samsung Electro-Mechanics	240 Ω	±5%	0.125	0805	±100ppm/°C	-55~155°C	Anti-Sulfur, Moisture Resistant	ROHS3	1
AC0805JR-07240RL	YAGEO	240 Ω	±5%	0.125	0805	±100ppm/°C	-55~155°C	AEC-Q200, Moisture Resistant	ROHS3	1
AC0805FR-07240RL	YAGEO	240 Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	AEC-Q200, Moisture Resistant	ROHS3	1
CRCW0805240RFKEA	Vishay Dale	240 Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	AEC-Q200	ROHS3	1
CRCW0805240RFKEAHP	Vishay Dale	240 Ω	±1%	0.5	0805	±100ppm/°C	-55~155°C	AEC-Q200, Pulse Withstanding	ROHS3	1
CRCW0805240RFKTA	Vishay Dale	240 Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	AEC-Q200	RoHS Non-compliant	1
ERJ-6ENF2400V	Panasonic Electronic Components	240 Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	AEC-Q200	ROHS3	1
RC0805FR-07240RL	YAGEO	240 Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	Moisture Resistant	ROHS3	1
RC0805JR-07240RL	YAGEO	240 Ω	±5%	0.125	0805	±100ppm/°C	-55~155°C	Moisture Resistant	ROHS3	1
RCS0805240RFKEA	Vishay Dale	240 Ω	±1%	0.5	0805	±100ppm/°C	-55~155°C	AEC-Q200, Pulse Withstanding	ROHS3	1
RMCF0805FT240R	Stackpole Electronics Inc	240 Ω	±1%	0.125	0805	±100ppm/°C	-55~155°C	AEC-Q200	ROHS3	1

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications)

AC0805JR-07240RL and RC0805JR-07240RL are direct functional equivalents maintaining the ±5% tolerance specification of the RCS2012J241CS. Both parts are ROHS3 compliant with MSL 1 rating and Active product status. AC0805JR-07240RL includes AEC-Q200 automotive qualification, providing additional reliability assurance for automotive and industrial applications. RC0805JR-07240RL offers high inventory availability (9,638 units) and is suitable for general-purpose applications.

For Improved Tolerance Applications

AC0805FR-07240RL, RC0805FR-07240RL, CRCW0805240RFKEA, ERJ-6ENF2400V, and RMCF0805FT240R provide ±1% tolerance specifications while maintaining all other core electrical parameters. These parts are appropriate for precision circuit designs where tighter tolerance improves overall system performance. All are ROHS3 compliant and AEC-Q200 qualified (except RC0805FR-07240RL). ERJ-6ENF2400V offers the highest inventory availability (111,343 units).

For Enhanced Power Dissipation

CRCW0805240RFKEAHP and RCS0805240RFKEA are rated at 0.5W (1/2W) power dissipation, providing four times the power handling capability of the original part while maintaining the 0805 package footprint. Both include AEC-Q200 qualification and pulse withstanding features. These parts are suitable for applications requiring higher current or power dissipation without PCB redesign.

Compliance Considerations

CRCW0805240RFKTA is RoHS non-compliant and REACH affected; this part is not recommended for new designs or applications requiring regulatory compliance. All other substitute parts maintain ROHS3 compliance and REACH unaffected status consistent with the original RCS2012J241CS.

Frequently Asked Questions (FAQ)

Q: Can AC0805JR-07240RL be used as a direct replacement for RCS2012J241CS?

A: Yes. AC0805JR-07240RL is a direct functional equivalent with identical resistance (240 Ohms), tolerance (±5%), power rating (0.125W), package (0805), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C to 155°C). Both are ROHS3 compliant with MSL 1 rating. AC0805JR-07240RL includes AEC-Q200 automotive qualification, which provides additional reliability assurance.

Q: What is the difference between ±5% and ±1% tolerance parts?

A: Tolerance specifies the maximum deviation of the actual resistance value from the nominal 240 Ohm specification. ±5% tolerance allows deviation between 228 and 252 Ohms, while ±1% tolerance restricts deviation to 237.6 and 242.4 Ohms. ±1% parts are suitable for precision applications where tighter component matching is required. Both tolerance grades are electrically and mechanically compatible in the 0805 package.

Q: Can I use CRCW0805240RFKEAHP (0.5W) instead of RCS2012J241CS (0.125W)?

A: Yes, from a functional and mechanical standpoint. CRCW0805240RFKEAHP maintains identical resistance, tolerance (±1%), package (0805), and temperature specifications. The higher power rating (0.5W vs. 0.125W) provides additional thermal margin and is suitable for applications with higher current or power dissipation requirements. The component footprint and electrical characteristics remain compatible.

Q: Are all substitute parts ROHS3 compliant?

A: No. CRCW0805240RFKTA is RoHS non-compliant and REACH affected. All other substitute parts listed are ROHS3 compliant and REACH unaffected, matching the compliance status of the original RCS2012J241CS. CRCW0805240RFKTA is not recommended for new designs or applications requiring regulatory compliance.

Q: What does AEC-Q200 qualification mean?

A: AEC-Q200 is an automotive electronics qualification standard that specifies reliability and performance requirements for passive components used in automotive applications. Parts with AEC-Q200 qualification (AC0805JR-07240RL, AC0805FR-07240RL, CRCW0805240RFKEA, CRCW0805240RFKEAHP, ERJ-6ENF2400V, RCS0805240RFKEA, RMCF0805FT240R) have undergone additional testing and validation for automotive environments. This qualification is not required for general-purpose applications but provides enhanced reliability assurance.

Q: Which substitute part has the highest inventory availability?

A: ERJ-6ENF2400V (Panasonic) has the highest inventory availability with 111,343 units in stock. This part offers ±1% tolerance, 0.125W power rating, ROHS3 compliance, AEC-Q200 qualification, and Active product status, making it suitable for both immediate procurement and long-term supply chain planning.

Q: Can I mix different substitute parts in the same circuit board design?

A: Yes. All substitute parts maintain identical resistance (240 Ohms), package (0805), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C to 155°C). Mixing parts with different tolerances (±5% vs. ±1%) or power ratings (0.125W vs. 0.5W) is mechanically and electrically compatible. However, circuit performance may vary slightly depending on tolerance specifications and application requirements.

Q: What is the physical size difference between substitute parts?

A: All substitute parts use the 0805 (2012 Metric) package with identical length (0.079" / 2.00mm) and width (0.049" / 1.25mm). Height varies slightly: RCS2012J241CS and RMCF0805FT240R are 0.026" (0.66mm and 0.65mm respectively), while YAGEO and most Vishay parts are 0.024" (0.60mm), and Panasonic ERJ-6ENF2400V is 0.028" (0.70mm). These height variations are within standard PCB assembly tolerances and do not affect compatibility.

Q: Is RC0805FR-07240RL suitable for automotive applications?

A: RC0805FR-07240RL is not AEC-Q200 qualified. While it is ROHS3 compliant and offers ±1% tolerance with moisture resistance, it lacks automotive qualification. For automotive applications, AC0805FR-07240RL, CRCW0805240RFKEA, ERJ-6ENF2400V, or RMCF0805FT240R are recommended as they include AEC-Q200 qualification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message