RCS2012J240CS Equivalent & Substitute Parts

Part Overview

The RCS2012J240CS is a 24 Ohm ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.125W (1/8W) in 0805 (2012 Metric) package format. This component features anti-sulfur and moisture-resistant construction with an operating temperature range of -55°C to 155°C. The part is ROHS3 compliant and carries an MSL rating of 1 (Unlimited). Equivalent and substitute parts are identified based on matching resistance value, package format, power rating, and electrical performance characteristics within acceptable tolerance and thermal specifications.

Key Parameters

Parameter	Value
Resistance	24 Ohms
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the RCS2012J240CS are grouped based on the following substitution criteria:

Primary Substitution Criteria:

Resistance value: 24 Ohms (exact match required)
Package format: 0805 (2012 Metric) (exact match required)
Composition: Thick Film (exact match required)
Temperature Coefficient: ±100ppm/°C (exact match required)
Operating Temperature Range: -55°C to 155°C (exact match required)
RoHS Status: ROHS3 Compliant (exact match required)
Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

Secondary Substitution Parameters:

Tolerance: ±5% (primary specification) or ±1% (tighter tolerance acceptable for direct substitution)
Power Rating: 0.125W (1/8W) minimum; higher ratings (0.4W, 0.5W) acceptable for applications requiring increased power dissipation capability
Packaging Format: Tape & Reel (TR) preferred; Cut Tape (CT) acceptable for non-automated assembly

Substitute parts meeting all primary criteria and at least one secondary criterion are classified as direct equivalents or compatible alternatives.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	RoHS	MSL	Height Max (mm)
RCS2012J240CS	Samsung Electro-Mechanics	24 Ω	±5%	0.125	0805	±100ppm/°C	-55 to 155°C	ROHS3	1	0.66
AC0805FR-0724RL	YAGEO	24 Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	ROHS3	1	0.60
AC0805JR-0724RL	YAGEO	24 Ω	±5%	0.125	0805	±100ppm/°C	-55 to 155°C	ROHS3	1	0.60
CRCW080524R0FKEA	Vishay Dale	24 Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	ROHS3	1	0.50
CRCW080524R0FKEAHP	Vishay Dale	24 Ω	±1%	0.5	0805	±100ppm/°C	-55 to 155°C	ROHS3	1	0.50
ERJ-6ENF24R0V	Panasonic Electronic Components	24 Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	ROHS3	1	0.70
ESR10EZPF24R0	Rohm Semiconductor	24 Ω	±1%	0.4	0805	±100ppm/°C	-55 to 155°C	ROHS3	1	0.65
RC0805FR-0724RL	YAGEO	24 Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	ROHS3	1	0.60
RC0805JR-0724RL	YAGEO	24 Ω	±5%	0.125	0805	±100ppm/°C	-55 to 155°C	ROHS3	1	0.60
RMCF0805FT24R0	Stackpole Electronics Inc	24 Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	ROHS3	1	0.65

Engineering Selection Recommendations

Direct Equivalents (±5% Tolerance Match):

AC0805JR-0724RL and RC0805JR-0724RL are direct functional equivalents to RCS2012J240CS, matching the ±5% tolerance specification, 0.125W power rating, and all electrical and environmental parameters. Both parts are ROHS3 compliant with MSL 1 rating and identical operating temperature range. These parts are suitable for one-to-one replacement in applications where the original specification is maintained.

Compatible Substitutes (±1% Tolerance, Same Power Rating):

AC0805FR-0724RL, CRCW080524R0FKEA, ERJ-6ENF24R0V, RC0805FR-0724RL, and RMCF0805FT24R0 provide tighter tolerance (±1%) while maintaining the 0.125W power rating and all other electrical specifications. These parts are compatible substitutes where improved tolerance performance is acceptable or beneficial. All carry ROHS3 compliance and MSL 1 rating.

Enhanced Power Rating Alternatives:

CRCW080524R0FKEAHP (0.5W) and ESR10EZPF24R0 (0.4W) are suitable for applications requiring higher power dissipation capability while maintaining the 24 Ohm resistance and ±1% tolerance. These parts retain all compliance certifications and environmental specifications of the primary part.

Packaging Considerations:

All substitute parts are available in Tape & Reel (TR) packaging except RC0805JR-0724RL, which is supplied in Cut Tape (CT) & Digi-Reel format. Selection should account for assembly process requirements and inventory management protocols.

Frequently Asked Questions (FAQ)

Q: Can AC0805JR-0724RL be used as a direct replacement for RCS2012J240CS?

A: Yes. AC0805JR-0724RL matches all primary substitution criteria: 24 Ohm resistance, ±5% tolerance, 0.125W power rating, 0805 package, ±100ppm/°C temperature coefficient, -55°C to 155°C operating range, ROHS3 compliance, and MSL 1 rating. This part is a direct functional equivalent.

Q: What is the difference between ±5% and ±1% tolerance parts?

A: Tolerance specifies the maximum deviation from the nominal resistance value. RCS2012J240CS with ±5% tolerance allows resistance between 22.8 Ohms and 25.2 Ohms. Substitute parts with ±1% tolerance (such as AC0805FR-0724RL) allow resistance between 23.76 Ohms and 24.24 Ohms. Tighter tolerance parts are compatible substitutes and provide improved precision where circuit design permits.

Q: Can higher power-rated parts (0.4W or 0.5W) replace the 0.125W RCS2012J240CS?

A: Yes. CRCW080524R0FKEAHP (0.5W) and ESR10EZPF24R0 (0.4W) are compatible substitutes. Higher power ratings indicate greater thermal dissipation capability and do not negatively affect circuit performance in applications designed for 0.125W components. All other electrical parameters remain identical.

Q: Are there packaging format differences between substitute parts?

A: Most substitute parts are supplied in Tape & Reel (TR) format, matching RCS2012J240CS packaging. RC0805JR-0724RL is supplied in Cut Tape (CT) & Digi-Reel format. Selection should align with assembly equipment and procurement workflows.

Q: Do all substitute parts meet the same compliance standards as RCS2012J240CS?

A: Yes. All listed substitute parts are ROHS3 compliant, carry MSL 1 (Unlimited) rating, and are REACH unaffected. All parts are classified under ECCN EAR99 and HTSUS 8533.21.0030, matching the regulatory classification of the primary part.

Q: Which substitute part offers the best availability?

A: RC0805FR-0724RL (YAGEO) has the highest inventory level at 384,140 pieces. ERJ-6ENF24R0V (Panasonic) follows with 302,073 pieces. Both parts meet all substitution criteria and offer reliable supply chain access.

Q: Can parts with different height specifications be used interchangeably?

A: Yes. All substitute parts maintain the 0805 (2012 Metric) package format with height variations between 0.50mm and 0.70mm. These dimensional differences do not affect electrical performance or PCB assembly compatibility. Height selection should account for specific PCB layout and clearance requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message