Equivalent & Substitute Parts for RCS2012J224CS

Part Overview

The RCS2012J224CS is a 220 kOhms ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.125W (1/8W) in the 0805 (2012 Metric) package. This component is designed for general-purpose applications requiring moisture resistance and anti-sulfur protection. The part is currently in active production status with 848 units in stock.

Substitute parts are identified to provide design flexibility when the primary part is unavailable, when alternative certifications are required, or when application-specific features such as automotive qualification or enhanced power ratings are needed.

Key Parameters

Parameter	Value	Specification
Resistance	220 kOhms	Fixed value, non-negotiable for substitution
Tolerance	±5%	Defines acceptable resistance range; tighter tolerances (±1%) are acceptable substitutes
Power Rating	0.125W (1/8W)	Minimum requirement; higher power ratings are acceptable substitutes
Package	0805 (2012 Metric)	Physical footprint; must match for PCB compatibility
Composition	Thick Film	Technology type; must remain consistent
Operating Temperature	-55°C to 155°C	Minimum range requirement; wider ranges are acceptable
Temperature Coefficient	±100ppm/°C	Stability specification; equal or better values are acceptable
Terminations	2	Fixed configuration for chip resistors
RoHS Status	ROHS3 Compliant	Environmental compliance requirement
MSL Rating	1 (Unlimited)	Moisture sensitivity level; equal or better ratings are acceptable

Substitute Part Grouping Explanation

Substitution logic for the RCS2012J224CS is based on the following criteria:

Primary Substitution Criteria (Must Match):

Resistance value: 220 kOhms (exact match required)
Package: 0805 (2012 Metric) (exact match required for PCB footprint compatibility)
Composition: Thick Film (technology type must remain consistent)
Number of terminations: 2 (standard chip resistor configuration)

Secondary Substitution Criteria (Equal or Better Acceptable):

Tolerance: ±5% or tighter (±1% is acceptable and provides improved accuracy)
Power rating: 0.125W minimum (0.5W or higher ratings are acceptable for enhanced margin)
Operating temperature range: -55°C to 155°C minimum (wider ranges acceptable)
Temperature coefficient: ±100ppm/°C or better
MSL rating: 1 or better (unlimited moisture sensitivity acceptable)
RoHS compliance: ROHS3 or equivalent environmental standards

Optional Enhancement Criteria (Application-Dependent):

Automotive AEC-Q200 certification (required for automotive applications)
Anti-sulfur feature (beneficial for harsh environments)
Pulse withstanding capability (for high-stress applications)

Substitute parts are grouped into three categories based on these criteria:

Category A - Direct Substitutes (±5% Tolerance, 1/8W): Parts matching tolerance and power rating exactly.

Category B - Upgraded Substitutes (±1% Tolerance, 1/8W): Parts with improved tolerance specification while maintaining same power rating.

Category C - Enhanced Substitutes (±1% Tolerance, 1/2W): Parts with improved tolerance and higher power rating for demanding applications.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Composition	Temp Coeff	Op. Temp (°C)	Height Max (mm)	AEC-Q200	RoHS	MSL
RCS2012J224CS	Samsung Electro-Mechanics	220k	±5%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155	0.66	No	ROHS3	1
AC0805JR-07220KL	YAGEO	220k	±5%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155	0.60	Yes	ROHS3	1
RC0805JR-07220KL	YAGEO	220k	±5%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155	0.60	No	ROHS3	1
AC0805FR-07220KL	YAGEO	220k	±1%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155	0.60	Yes	ROHS3	1
RC0805FR-07220KL	YAGEO	220k	±1%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155	0.60	No	ROHS3	1
CRCW0805220KFKEA	Vishay Dale	220k	±1%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155	0.50	Yes	ROHS3	1
CRCW0805220KFKTA	Vishay Dale	220k	±1%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155	0.50	Yes	RoHS NC	1
ERJ-6ENF2203V	Panasonic	220k	±1%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155	0.70	Yes	ROHS3	1
KTR10EZPF2203	Rohm Semiconductor	220k	±1%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155	0.65	Yes	ROHS3	1
CRCW0805220KFKEAHP	Vishay Dale	220k	±1%	0.5	0805	Thick Film	±100ppm/°C	-55 to 155	0.50	Yes	ROHS3	1
ERJ-UP6F2203V	Panasonic	220k	±1%	0.5	0805	Thick Film	±100ppm/°C	-55 to 155	0.70	Yes	ROHS3	1

Engineering Selection Recommendations

For Direct Replacement (Same Specifications): Select AC0805JR-07220KL or RC0805JR-07220KL when an exact functional equivalent is required. Both parts maintain ±5% tolerance and 0.125W power rating. AC0805JR-07220KL includes AEC-Q200 automotive certification; RC0805JR-07220KL does not. Both are ROHS3 compliant with MSL rating 1.

For Improved Tolerance Applications: Select from the ±1% tolerance group (AC0805FR-07220KL, RC0805FR-07220KL, CRCW0805220KFKEA, ERJ-6ENF2203V, or KTR10EZPF2203) when circuit design requires tighter resistance accuracy. All maintain 0.125W power rating and 0805 package compatibility. CRCW0805220KFKEA, ERJ-6ENF2203V, and KTR10EZPF2203 include AEC-Q200 certification.

For Automotive Applications: Select parts with AEC-Q200 certification: AC0805JR-07220KL (±5%, 1/8W), AC0805FR-07220KL (±1%, 1/8W), CRCW0805220KFKEA (±1%, 1/8W), ERJ-6ENF2203V (±1%, 1/8W), KTR10EZPF2203 (±1%, 1/8W), CRCW0805220KFKEAHP (±1%, 1/2W), or ERJ-UP6F2203V (±1%, 1/2W).

For High-Stress or Pulse Applications: Select CRCW0805220KFKEAHP or ERJ-UP6F2203V. Both provide 0.5W (1/2W) power rating with ±1% tolerance, pulse withstanding capability, and AEC-Q200 certification. ERJ-UP6F2203V additionally includes anti-sulfur protection.

For RoHS3 Compliance: All listed substitutes except CRCW0805220KFKTA are ROHS3 compliant. CRCW0805220KFKTA is RoHS non-compliant and should be avoided in applications requiring environmental compliance.

For Moisture-Sensitive Environments: All parts maintain MSL rating 1 (unlimited). AC0805FR-07220KL, RC0805FR-07220KL, and ERJ-UP6F2203V explicitly specify moisture-resistant features.

Frequently Asked Questions (FAQ)

Q: Can I use a ±1% tolerance part as a substitute for the ±5% RCS2012J224CS?

A: Yes. A ±1% tolerance part is a direct functional upgrade. The tighter tolerance provides improved accuracy while maintaining all other electrical and mechanical specifications. No circuit redesign is required.

Q: What is the difference between AC0805JR-07220KL and RC0805JR-07220KL?

A: Both parts are 220 kOhms ±5% 1/8W 0805 resistors from YAGEO with identical electrical specifications. AC0805JR-07220KL includes AEC-Q200 automotive certification; RC0805JR-07220KL does not. Packaging differs: AC series uses Tape & Reel; RC series uses Cut Tape & Digi-Reel.

Q: Can I substitute a 1/2W (0.5W) part for the 1/8W (0.125W) RCS2012J224CS?

A: Yes. A higher power rating provides additional thermal margin and is electrically compatible. The 0805 package remains unchanged. Select CRCW0805220KFKEAHP or ERJ-UP6F2203V for 1/2W options with ±1% tolerance and AEC-Q200 certification.

Q: Are all substitute parts ROHS3 compliant?

A: No. CRCW0805220KFKTA is RoHS non-compliant. All other listed substitutes are ROHS3 compliant. Verify compliance requirements for your application before selection.

Q: What does AEC-Q200 certification mean?

A: AEC-Q200 is an automotive qualification standard for passive components. Parts with this certification have undergone additional testing and reliability validation for automotive applications. Select AEC-Q200 certified parts for automotive designs.

Q: Can I use parts with different packaging formats interchangeably?

A: No. Packaging format affects supply chain and handling but does not affect electrical compatibility. Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel formats are both suitable for automated assembly. Verify your procurement and assembly process requirements.

Q: What is the significance of the height specification (Height - Seated Max)?

A: Height specification affects PCB clearance and assembly compatibility. The RCS2012J224CS has a maximum height of 0.66mm. Most substitutes range from 0.50mm to 0.70mm. Verify clearance in your PCB design, particularly for applications with tight vertical constraints.

Q: Which substitute offers the best overall compatibility with the RCS2012J224CS?

A: AC0805JR-07220KL provides the closest match: identical ±5% tolerance, 1/8W power rating, 0805 package, and ROHS3 compliance. It adds AEC-Q200 certification as an enhancement. For applications not requiring automotive qualification, RC0805JR-07220KL is equivalent without the AEC-Q200 feature.

Q: What is the temperature coefficient specification, and why does it matter?

A: Temperature coefficient (±100ppm/°C) specifies how resistance changes with temperature. All listed parts maintain ±100ppm/°C, ensuring consistent performance across the -55°C to 155°C operating range. This specification is identical across all substitutes.

Q: Can I mix different substitute parts in the same design?

A: Yes, provided all parts meet your circuit requirements. Mixing parts with different tolerances (±5% and ±1%) is acceptable if circuit design accounts for the worst-case tolerance stack. Ensure all parts meet compliance and certification requirements for your application.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message