RCS2012J222CS Equivalent & Substitute Parts Reference

Part Overview

The RCS2012J222CS is a 2.2 kOhms ±5% 0.125W (1/8W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant properties. The part is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are identified based on matching or superior electrical and mechanical specifications within the 0805 package form factor. Substitutes are selected where resistance value, power rating, tolerance, operating temperature range, and package dimensions align with or exceed the original part's capabilities.

Key Parameters

Parameter	RCS2012J222CS
Resistance Value	2.2 kOhms
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Size / Dimension	0.079" L x 0.049" W (2.00mm x 1.25mm)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution logic for the RCS2012J222CS is based on the following critical parameters:

Mandatory Matching Parameters:

Resistance Value: 2.2 kOhms (exact match required)
Package / Case: 0805 (2012 Metric) (physical compatibility)
Composition: Thick Film (material consistency)
Temperature Coefficient: ±100ppm/°C (thermal stability)
Operating Temperature Range: -55°C ~ 155°C (environmental compatibility)
Moisture Sensitivity Level: 1 (Unlimited) (handling and storage compatibility)

Allowable Variation Parameters:

Tolerance: Can be equal (±5%) or tighter (±1%, ±0.5%)
Power Rating: Can be equal (0.125W) or higher (0.5W)
Features: Substitutes may include additional certifications (AEC-Q200) or enhanced properties (anti-sulfur, pulse withstanding)
RoHS Status: Substitutes must maintain ROHS3 compliance or equivalent

Substitute parts are grouped by tolerance level and power rating, as these parameters determine functional equivalence and application suitability.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Height Max	RoHS	MSL
RCS2012J222CS	Samsung Electro-Mechanics	2.2 kΩ	±5%	0.125	0805	±100ppm/°C	-55~155°C	0.66mm	ROHS3	1
AC0805JR-072K2L	YAGEO	2.2 kΩ	±5%	0.125	0805	±100ppm/°C	-55~155°C	0.60mm	ROHS3	1
AC0805FR-072K2L	YAGEO	2.2 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.60mm	ROHS3	1
RC0805FR-072K2L	YAGEO	2.2 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.60mm	ROHS3	1
RC0805DR-072K2L	YAGEO	2.2 kΩ	±0.5%	0.125	0805	±100ppm/°C	-55~155°C	0.60mm	ROHS3	1
CRCW08052K20FKEA	Vishay Dale	2.2 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.50mm	ROHS3	1
CRCW08052K20FKTA	Vishay Dale	2.2 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.50mm	Non-compliant	1
CRCW08052K20FKEAHP	Vishay Dale	2.2 kΩ	±1%	0.5	0805	±100ppm/°C	-55~155°C	0.50mm	ROHS3	1
ERJ-6ENF2201V	Panasonic Electronic Components	2.2 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.70mm	ROHS3	1
ERJ-S06F2201V	Panasonic Electronic Components	2.2 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.70mm	ROHS3	1
ERJ-UP6F2201V	Panasonic Electronic Components	2.2 kΩ	±1%	0.5	0805	±100ppm/°C	-55~155°C	0.70mm	ROHS3	1

Engineering Selection Recommendations

Direct Equivalents (±5% Tolerance, 0.125W):

AC0805JR-072K2L (YAGEO) is a direct functional equivalent with matching ±5% tolerance and 0.125W power rating. This part maintains ROHS3 compliance and AEC-Q200 automotive qualification. Physical dimensions are compatible with identical 0805 package specifications.

Tighter Tolerance Substitutes (±1% Tolerance, 0.125W):

AC0805FR-072K2L, RC0805FR-072K2L, CRCW08052K20FKEA, ERJ-6ENF2201V, and ERJ-S06F2201V provide improved tolerance performance at ±1% while maintaining 0.125W power rating and 0805 package compatibility. All maintain ROHS3 compliance. These parts are suitable for applications requiring higher precision than the original ±5% specification.

Enhanced Precision Substitute (±0.5% Tolerance, 0.125W):

RC0805DR-072K2L (YAGEO) offers the tightest tolerance at ±0.5% with 0.125W power rating. This part is ROHS3 compliant and suitable for precision circuit applications.

Higher Power Rating Substitutes (0.5W, ±1% Tolerance):

CRCW08052K20FKEAHP (Vishay Dale) and ERJ-UP6F2201V (Panasonic Electronic Components) provide 0.5W power rating with ±1% tolerance in the 0805 package. These parts are suitable for applications requiring higher power dissipation capability while maintaining the same physical footprint. Both are ROHS3 compliant.

Compliance Consideration:

CRCW08052K20FKTA (Vishay Dale) is RoHS non-compliant and REACH affected. This part is not recommended for new designs requiring regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can AC0805JR-072K2L replace RCS2012J222CS in all applications?

A: AC0805JR-072K2L is a direct functional equivalent with identical resistance value (2.2 kOhms), tolerance (±5%), power rating (0.125W), and package (0805). Both parts share the same operating temperature range (-55°C ~ 155°C), temperature coefficient (±100ppm/°C), and moisture sensitivity level (MSL 1). Physical dimensions are compatible. This part is suitable for direct replacement.

Q: What is the difference between ±5% and ±1% tolerance substitutes?

A: Tolerance specifies the allowable deviation from the nominal resistance value. RCS2012J222CS has ±5% tolerance, meaning the actual resistance can vary between 2.09 kOhms and 2.31 kOhms. Substitutes with ±1% tolerance (such as AC0805FR-072K2L or RC0805FR-072K2L) restrict variation to 2.178 kOhms to 2.222 kOhms. Tighter tolerance parts are suitable for precision applications but are not required for general-purpose circuits where ±5% tolerance is acceptable.

Q: Can I use a 0.5W rated part instead of 0.125W?

A: CRCW08052K20FKEAHP and ERJ-UP6F2201V provide 0.5W power rating in the same 0805 package. Higher power rating does not negatively affect circuit performance in applications designed for 0.125W. These parts are suitable for applications requiring higher power dissipation margin or operating in elevated temperature environments. Physical footprint remains identical.

Q: Are all substitute parts ROHS3 compliant?

A: All recommended substitutes except CRCW08052K20FKTA are ROHS3 compliant. CRCW08052K20FKTA is RoHS non-compliant and REACH affected, making it unsuitable for applications requiring regulatory compliance. For new designs, select from ROHS3 compliant alternatives.

Q: What does AEC-Q200 qualification mean?

A: AEC-Q200 is an automotive industry qualification standard for passive components. Substitutes with AEC-Q200 rating (AC0805JR-072K2L, AC0805FR-072K2L, CRCW08052K20FKEA, CRCW08052K20FKEAHP, ERJ-6ENF2201V, ERJ-S06F2201V, ERJ-UP6F2201V) meet stringent automotive reliability and performance requirements. This certification is not required for non-automotive applications but indicates enhanced quality and reliability.

Q: Does package height variation affect PCB assembly?

A: All substitute parts use the 0805 (2012 Metric) package with compatible footprints. Height variations (ranging from 0.50mm to 0.70mm maximum seated height) are within standard 0805 package specifications and do not affect PCB assembly compatibility. Height differences are negligible for standard reflow soldering processes.

Q: Can I substitute parts with different packaging formats?

A: Substitutes must maintain the 0805 (2012 Metric) package format for direct PCB compatibility. Parts listed with different packaging formats (Cut Tape vs. Tape & Reel) refer to supply packaging only and do not affect component performance or PCB assembly. Select based on your procurement and inventory management requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message