RCS2012J221CS Equivalent & Substitute Parts

Part Overview

The RCS2012J221CS is a 220 Ohm ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.125W (1/8W) in the 0805 (2012 Metric) package. This component features anti-sulfur and moisture-resistant construction with a temperature coefficient of ±100ppm/°C and operates across the -55°C to 155°C temperature range. The part is ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating and maintains Active product status. Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and application-specific requirements such as enhanced tolerance, increased power rating, or automotive qualification.

Key Parameters

Parameter	Value
Resistance	220 Ohms
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)
Number of Terminations	2

Substitute Part Grouping Explanation

Substitution of the RCS2012J221CS is determined by strict equivalence across the following critical parameters: resistance value (220 Ohms), package type (0805 / 2012 Metric), operating temperature range (-55°C ~ 155°C), temperature coefficient (±100ppm/°C), composition (thick film), and compliance certifications (ROHS3, MSL 1).

Substitute parts are grouped into three categories based on tolerance and power rating variations:

Category 1: Direct Equivalents (±5% Tolerance, 0.125W) Parts with identical tolerance and power rating to the main part. These provide pin-for-pin compatibility with no electrical performance trade-offs.

Category 2: Enhanced Tolerance Substitutes (±1% Tolerance, 0.125W) Parts with tighter tolerance specifications while maintaining the same 0.125W power rating. These are suitable for applications requiring improved accuracy without increased power dissipation capability.

Category 3: Elevated Power Rating Substitutes (0.4W to 0.5W) Parts with higher power ratings (0.4W, 0.5W) while maintaining 220 Ohm resistance and compatible package dimensions. These accommodate applications with higher power dissipation requirements while preserving mechanical fit.

All substitute parts maintain the 0805 package footprint, -55°C to 155°C operating range, ±100ppm/°C temperature coefficient, and ROHS3 compliance. Automotive AEC-Q200 qualification is present in most substitutes but is not a requirement for direct substitution of the non-automotive main part.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Package	Temp Coeff	Op. Temp Range	RoHS Status	MSL
RCS2012J221CS	Samsung Electro-Mechanics	220 Ohms	±5%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	ROHS3	1
AC0805JR-07220RL	YAGEO	220 Ohms	±5%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	ROHS3	1
RC0805JR-07220RL	YAGEO	220 Ohms	±5%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	ROHS3	1
AC0805FR-07220RL	YAGEO	220 Ohms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	ROHS3	1
RC0805FR-07220RL	YAGEO	220 Ohms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	ROHS3	1
ERJ-6ENF2200V	Panasonic Electronic Components	220 Ohms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	ROHS3	1
CRCW0805220RFKEA	Vishay Dale	220 Ohms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	ROHS3	1
ESR10EZPF2200	Rohm Semiconductor	220 Ohms	±1%	0.4W	0805	±100ppm/°C	-55°C ~ 155°C	ROHS3	1
CRCW0805220RFKEAHP	Vishay Dale	220 Ohms	±1%	0.5W	0805	±100ppm/°C	-55°C ~ 155°C	ROHS3	1
ERJ-P06D2200V	Panasonic Electronic Components	220 Ohms	±0.5%	0.5W	0805	±100ppm/°C	-55°C ~ 155°C	ROHS3	1
ERJ-UP6F2200V	Panasonic Electronic Components	220 Ohms	±1%	0.5W	0805	±100ppm/°C	-55°C ~ 155°C	ROHS3	1

Engineering Selection Recommendations

Direct Substitution (Same Tolerance and Power Rating)

AC0805JR-07220RL and RC0805JR-07220RL are direct functional equivalents to the RCS2012J221CS, both rated at 220 Ohms ±5% and 0.125W in the 0805 package. These parts maintain identical electrical specifications and compliance status. AC0805JR-07220RL carries AEC-Q200 automotive qualification, while RC0805JR-07220RL does not. Both are ROHS3 compliant with MSL 1 rating and operate across -55°C to 155°C.

Enhanced Tolerance Substitution (±1% Tolerance, 0.125W)

AC0805FR-07220RL, RC0805FR-07220RL, ERJ-6ENF2200V, and CRCW0805220RFKEA provide tighter tolerance specifications (±1%) while maintaining the 0.125W power rating and 0805 package. These parts are suitable for applications requiring improved accuracy without increased power dissipation. All maintain ROHS3 compliance and MSL 1 rating. AC0805FR-07220RL and ERJ-6ENF2200V carry AEC-Q200 qualification.

Elevated Power Rating Substitution (0.4W to 0.5W)

ESR10EZPF2200, CRCW0805220RFKEAHP, ERJ-P06D2200V, and ERJ-UP6F2200V offer increased power ratings (0.4W or 0.5W) while maintaining 220 Ohm resistance and 0805 package compatibility. These parts accommodate higher power dissipation requirements. ESR10EZPF2200 provides 0.4W rating with ±1% tolerance. CRCW0805220RFKEAHP and ERJ-P06D2200V provide 0.5W rating. ERJ-UP6F2200V provides 0.5W with ±1% tolerance and anti-sulfur features matching the main part. All carry AEC-Q200 qualification and ROHS3 compliance.

All substitute parts maintain the critical parameters of 220 Ohm resistance, 0805 package footprint, -55°C to 155°C operating range, ±100ppm/°C temperature coefficient, and ROHS3 compliance with MSL 1 rating.

Frequently Asked Questions (FAQ)

Q: Can AC0805JR-07220RL be used as a direct replacement for RCS2012J221CS?

A: Yes. AC0805JR-07220RL is a direct functional equivalent with identical 220 Ohm resistance, ±5% tolerance, 0.125W power rating, 0805 package, and operating temperature range of -55°C to 155°C. Both parts are ROHS3 compliant with MSL 1 rating. The primary difference is manufacturer (YAGEO vs. Samsung Electro-Mechanics) and AEC-Q200 automotive qualification present in the YAGEO part.

Q: What is the difference between ±5% and ±1% tolerance substitutes?

A: Tolerance specifies the allowable deviation from the nominal 220 Ohm resistance value. The RCS2012J221CS has ±5% tolerance, meaning resistance can range from 209 to 231 Ohms. Substitutes with ±1% tolerance (such as AC0805FR-07220RL or ERJ-6ENF2200V) have resistance ranging from 217.8 to 222.2 Ohms, providing tighter accuracy. Selection depends on circuit requirements for precision.

Q: Can I use a 0.5W rated resistor in place of the 0.125W RCS2012J221CS?

A: Yes, from an electrical standpoint. Parts such as CRCW0805220RFKEAHP, ERJ-P06D2200V, and ERJ-UP6F2200V maintain 220 Ohm resistance and 0805 package compatibility while offering 0.5W power rating. Higher power rating does not degrade performance in applications requiring only 0.125W dissipation. However, verify that board layout and thermal design accommodate the potentially different physical dimensions or height specifications of the substitute part.

Q: Are all substitute parts automotive qualified?

A: Most substitute parts carry AEC-Q200 automotive qualification, including AC0805JR-07220RL, AC0805FR-07220RL, ERJ-6ENF2200V, CRCW0805220RFKEA, CRCW0805220RFKEAHP, ERJ-P06D2200V, and ERJ-UP6F2200V. RC0805JR-07220RL and RC0805FR-07220RL do not carry AEC-Q200 qualification. The main part RCS2012J221CS does not specify AEC-Q200 qualification. Selection of automotive-qualified parts is optional unless the application specifically requires this certification.

Q: What is the significance of anti-sulfur and moisture-resistant features?

A: The RCS2012J221CS specifies anti-sulfur and moisture-resistant construction. ERJ-UP6F2200V also includes anti-sulfur features. These features enhance reliability in harsh environments with high humidity or sulfur-containing atmospheres. Other substitutes specify moisture-resistant construction (AC0805JR-07220RL, AC0805FR-07220RL, RC0805JR-07220RL, RC0805FR-07220RL) or do not explicitly specify these features. For applications in corrosive environments, ERJ-UP6F2200V provides the closest feature match to the main part.

Q: Do all parts have the same physical dimensions?

A: All substitute parts use the 0805 (2012 Metric) package with nominal dimensions of 0.079" L x 0.049" W (2.00mm x 1.25mm). Maximum seated heights vary slightly: RCS2012J221CS is 0.026" (0.66mm), while most substitutes range from 0.020" to 0.028" (0.50mm to 0.70mm). These variations are within typical PCB design tolerances for 0805 components. Verify specific height requirements if board clearance is constrained.

Q: What does MSL 1 (Unlimited) moisture sensitivity rating mean?

A: MSL 1 indicates the lowest moisture sensitivity level, meaning the component can be stored indefinitely without moisture baking requirements prior to soldering. All listed parts, including the main part and substitutes, carry MSL 1 rating, eliminating moisture handling concerns during assembly and storage.

Q: Are all parts ROHS3 compliant?

A: Yes. The RCS2012J221CS and all listed substitute parts are ROHS3 compliant, confirming compliance with Restriction of Hazardous Substances regulations. This applies uniformly across all options presented.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message