RCS2012J113CS Equivalent & Substitute Parts

Part Overview

The RCS2012J113CS is an 11 kOhms ±5% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with anti-sulfur and moisture-resistant characteristics. The part is ROHS3 compliant and carries MSL Level 1 rating, indicating unlimited shelf life under standard storage conditions.

Equivalent and substitute parts are identified to address supply chain requirements, inventory availability, or specific application needs where alternative manufacturers' components meet or exceed the electrical and mechanical specifications of the primary part.

Key Parameters

Parameter	Value
Resistance	11 kOhms
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the RCS2012J113CS are grouped based on the following substitution criteria:

Primary Substitution Criteria (Mandatory Match):

Resistance value: 11 kOhms
Package / Case: 0805 (2012 Metric)
Composition: Thick Film
Temperature Coefficient: ±100ppm/°C
Operating Temperature Range: -55°C ~ 155°C
Moisture Sensitivity Level: 1 (Unlimited)

Secondary Substitution Criteria (Allowable Variation):

Tolerance: ±5% (main part) to ±1% (substitute parts) — tighter tolerance is acceptable
Power Rating: 0.125W (main part) to 0.5W (substitute parts) — higher power rating is acceptable
RoHS Status: ROHS3 Compliant (preferred) or RoHS non-compliant (limited use)
Certifications: AEC-Q200 automotive qualification (added value, not required)

Substitutes are divided into two categories:

Category A — Direct Equivalents (±5% Tolerance, 0.125W): RC0805JR-0711KL (YAGEO) — Identical tolerance and power rating

Category B — Enhanced Substitutes (±1% Tolerance, 0.125W): AC0805FR-0711KL (YAGEO), CRCW080511K0FKEA (Vishay Dale), CRCW080511K0FKTA (Vishay Dale), ERJ-6ENF1102V (Panasonic), RC0805FR-0711KL (YAGEO), RMCF0805FT11K0 (Stackpole)

Category C — Higher Power Substitutes (±1% Tolerance, 0.5W): CRCW080511K0FKEAHP (Vishay Dale), RCS080511K0FKEA (Vishay Dale)

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	RoHS	MSL	AEC-Q200
RCS2012J113CS	Samsung Electro-Mechanics	11 kΩ	±5%	0.125	0805	±100ppm/°C	-55~155°C	ROHS3	1	No
RC0805JR-0711KL	YAGEO	11 kΩ	±5%	0.125	0805	±100ppm/°C	-55~155°C	ROHS3	1	No
AC0805FR-0711KL	YAGEO	11 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	ROHS3	1	Yes
CRCW080511K0FKEA	Vishay Dale	11 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	ROHS3	1	Yes
CRCW080511K0FKTA	Vishay Dale	11 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Non-compliant	1	Yes
CRCW080511K0FKEAHP	Vishay Dale	11 kΩ	±1%	0.5	0805	±100ppm/°C	-55~155°C	ROHS3	1	Yes
ERJ-6ENF1102V	Panasonic Electronic Components	11 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	ROHS3	1	Yes
RC0805FR-0711KL	YAGEO	11 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	ROHS3	1	No
RCS080511K0FKEA	Vishay Dale	11 kΩ	±1%	0.5	0805	±100ppm/°C	-55~155°C	ROHS3	1	Yes
RMCF0805FT11K0	Stackpole Electronics Inc	11 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	ROHS3	1	Yes

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications):

RC0805JR-0711KL (YAGEO) is the direct equivalent substitute, matching the RCS2012J113CS in tolerance (±5%), power rating (0.125W), and all electrical characteristics. Both parts are ROHS3 compliant with MSL Level 1 rating. This substitute is suitable for applications where the original specification must be maintained without modification.

For Enhanced Performance Applications:

AC0805FR-0711KL, CRCW080511K0FKEA, ERJ-6ENF1102V, RC0805FR-0711KL, and RMCF0805FT11K0 provide tighter tolerance (±1%) while maintaining the 0.125W power rating and all other electrical parameters. These parts carry AEC-Q200 automotive qualification, indicating compliance with automotive reliability standards. Selection among these options depends on packaging preference (Tape & Reel vs. Cut Tape) and manufacturer availability.

For Higher Power Dissipation Requirements:

CRCW080511K0FKEAHP and RCS080511K0FKEA offer 0.5W power rating with ±1% tolerance and AEC-Q200 qualification. These parts are suitable for applications requiring increased power handling capability while maintaining the same package footprint and resistance value.

Compliance Considerations:

All recommended substitutes maintain ROHS3 compliance except CRCW080511K0FKTA, which is RoHS non-compliant. CRCW080511K0FKTA is restricted to applications where RoHS compliance is not required and REACH compliance is not a constraint.

Frequently Asked Questions (FAQ)

Q: Can RC0805JR-0711KL replace RCS2012J113CS in any application?

A: Yes. RC0805JR-0711KL is a direct equivalent with identical resistance (11 kOhms), tolerance (±5%), power rating (0.125W), package (0805), and all electrical parameters. Both parts are ROHS3 compliant with MSL Level 1 rating.

Q: What is the advantage of using ±1% tolerance substitutes instead of the ±5% main part?

A: Tighter tolerance (±1%) provides improved circuit accuracy and reduced performance variation across production batches. This is beneficial for precision analog circuits, reference networks, and applications with tight impedance matching requirements. The ±1% substitutes are electrically compatible with the ±5% specification.

Q: Are the 0.5W power rating substitutes (CRCW080511K0FKEAHP, RCS080511K0FKEA) physically compatible with the 0.125W main part?

A: Yes. Both 0.125W and 0.5W versions maintain identical package dimensions (0805 / 2012 Metric) and footprint. The 0.5W variants have lower maximum seated height (0.020" vs. 0.026"), ensuring PCB layout compatibility. Higher power rating does not affect electrical performance in circuits designed for 0.125W operation.

Q: What does AEC-Q200 qualification indicate?

A: AEC-Q200 is an automotive industry standard qualification for passive components. It certifies that the part meets automotive reliability, temperature cycling, and stress testing requirements. Parts with AEC-Q200 qualification are suitable for automotive and high-reliability applications, though they function identically to non-qualified parts in standard applications.

Q: Can CRCW080511K0FKTA be used in RoHS-regulated applications?

A: No. CRCW080511K0FKTA is RoHS non-compliant and REACH-affected. It is restricted to applications where RoHS compliance is not required. All other substitutes listed are ROHS3 compliant and suitable for RoHS-regulated markets.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) packaging?

A: Tape & Reel packaging supplies components on continuous carrier tape wound on reels, suitable for high-volume automated assembly. Cut Tape & Digi-Reel packaging provides components on cut tape segments or alternative reel formats, suitable for lower-volume or mixed-component assembly. Both packaging formats contain identical components; selection depends on assembly equipment and order quantity requirements.

Q: Are all substitutes available in the same packaging format as the main part?

A: No. The main part RCS2012J113CS is supplied in Tape & Reel (TR) format. Substitute parts are available in both Tape & Reel and Cut Tape (CT) & Digi-Reel formats. Verify packaging availability with the supplier before finalizing component selection.

Q: What is MSL Level 1 and why is it important?

A: MSL (Moisture Sensitivity Level) Level 1 indicates unlimited shelf life under standard storage conditions (typically 30°C / 60% RH). Components with MSL Level 1 do not require special moisture-controlled storage or baking procedures before soldering, simplifying inventory management and reducing component handling costs.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message