RCS2012F9762CS Equivalent & Substitute Parts

Part Overview

The RCS2012F9762CS is a 97.6 kOhms ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format with 0.125W power rating. This component is classified as Active product status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). The RCS2012F9762CS incorporates anti-sulfur and moisture-resistant construction suitable for general industrial applications. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and package compatibility to ensure direct board-level interchangeability.

Substiute Parts

RCS2012F9762CS

Samsung Electro-MechanicsIn Stock: 725RCS2012F9762CS Datasheet

Current PartRFQ

CRCW080597K6FKEA

Vishay DaleIn Stock: 15174CRCW080597K6FKEA Datasheet

SimilarRFQ

ERJ-6ENF9762V

Panasonic Electronic ComponentsIn Stock: 61230ERJ-6ENF9762V Datasheet

SimilarRFQ

RC0805FR-0797K6L

YAGEOIn Stock: 71844RC0805FR-0797K6L Datasheet

SimilarRFQ

RMCF0805FT97K6

Stackpole Electronics IncIn Stock: 22392RMCF0805FT97K6 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCS2012F9762CS is determined by strict equivalence across the following critical parameters:

Electrical Specifications: Resistance value of 97.6 kOhms, tolerance of ±1%, and power rating of 0.125W (1/8W) must match exactly. Temperature coefficient of ±100ppm/°C and operating temperature range of -55°C to 155°C establish thermal performance boundaries.

Mechanical Compatibility: Package designation 0805 (2012 Metric) with dimensions 0.079" L x 0.049" W (2.00mm x 1.25mm) is mandatory. Height variation within seated maximum specifications (0.020" to 0.028" / 0.50mm to 0.70mm) is acceptable for PCB assembly compatibility.

Material & Construction: Thick film composition is required. Anti-sulfur and moisture-resistant features are beneficial but not mandatory for substitution; automotive AEC-Q200 qualification is an enhancement feature.

Regulatory Compliance: ROHS3 compliance and MSL 1 (Unlimited) rating are standard across all identified substitutes.

All four substitute parts meet these criteria and are classified as direct equivalents.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts are direct electrical and mechanical equivalents to the RCS2012F9762CS. Selection among these alternatives is based on availability, supply chain considerations, and application-specific requirements.

CRCW080597K6FKEA (Vishay Dale): Offers automotive AEC-Q200 qualification with lowest seated height (0.020" / 0.50mm), providing maximum PCB clearance margin. Inventory availability is 15,134 units.

ERJ-6ENF9762V (Panasonic Electronic Components): Provides automotive AEC-Q200 qualification with highest seated height specification (0.028" / 0.70mm). Largest inventory stock at 61,145 units supports high-volume production requirements.

RC0805FR-0797K6L (YAGEO): Maintains moisture-resistant construction matching the original RCS2012F9762CS feature set without automotive qualification. Seated height of 0.024" (0.60mm) provides mid-range clearance. Inventory of 71,773 units.

RMCF0805FT97K6 (Stackpole Electronics Inc): Incorporates automotive AEC-Q200 qualification with seated height of 0.026" (0.65mm), matching the original component specification. Inventory availability is 22,286 units.

All parts maintain ROHS3 compliance, MSL 1 rating, and identical electrical performance across the specified operating temperature range.

Frequently Asked Questions (FAQ)

Q: Can CRCW080597K6FKEA replace RCS2012F9762CS in any application?

A: Yes. CRCW080597K6FKEA matches all critical electrical parameters (97.6 kOhms ±1%, 0.125W, ±100ppm/°C, -55°C to 155°C) and mechanical specifications (0805 package, 2.00mm x 1.25mm). The lower seated height (0.020" vs 0.026") provides additional PCB clearance without affecting functionality.

Q: What is the difference between automotive-qualified and non-automotive versions?

A: Automotive AEC-Q200 qualification (CRCW080597K6FKEA, ERJ-6ENF9762V, RMCF0805FT97K6) indicates enhanced reliability testing and quality assurance protocols. The RCS2012F9762CS and RC0805FR-0797K6L do not specify AEC-Q200 qualification. All parts meet identical electrical and thermal specifications.

Q: Are there height differences that affect PCB assembly?

A: Seated height varies from 0.020" (0.50mm) to 0.028" (0.70mm) across the substitute group. These variations fall within standard PCB assembly tolerances and do not affect reflow soldering or component placement. Height differences are negligible for typical circuit board designs.

Q: Do all substitutes have the same moisture sensitivity rating?

A: Yes. All parts, including the original RCS2012F9762CS, carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage, handling, or assembly processes.

Q: Which substitute offers the best inventory availability?

A: RC0805FR-0797K6L (YAGEO) provides the highest stock level at 71,773 units, followed by ERJ-6ENF9762V (Panasonic) at 61,145 units. Both support immediate fulfillment for high-volume requirements.