RCS2012F9760CS Equivalent & Substitute Parts

Part Overview

The RCS2012F9760CS is a 976 Ohm ±1% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is classified as Active product status and is designed for general-purpose applications requiring precision resistive elements with anti-sulfur and moisture-resistant properties. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component requirements.

Substiute Parts

RCS2012F9760CS

Samsung Electro-MechanicsIn Stock: 721RCS2012F9760CS Datasheet

Current PartRFQ

CRCW0805976RFKEA

Vishay DaleIn Stock: 24154CRCW0805976RFKEA Datasheet

SimilarRFQ

ERJ-6ENF9760V

Panasonic Electronic ComponentsIn Stock: 53850ERJ-6ENF9760V Datasheet

SimilarRFQ

RC0805FR-07976RL

YAGEOIn Stock: 49766RC0805FR-07976RL Datasheet

SimilarRFQ

RMCF0805FT976R

Stackpole Electronics IncIn Stock: 35238RMCF0805FT976R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RCS2012F9760CS is determined by strict alignment of the following parameters:

Critical Matching Parameters:

• Resistance value: 976 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

All identified substitute parts meet these electrical and mechanical specifications. Variations in physical height and feature sets (such as automotive AEC-Q200 qualification) do not disqualify substitution when core parameters remain identical.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts are classified as Active product status and maintain full ROHS3 compliance and REACH unaffected status, matching the original RCS2012F9760CS specification.

CRCW0805976RFKEA (Vishay Dale): This substitute carries automotive AEC-Q200 qualification and exhibits the lowest maximum seated height at 0.020" (0.50mm). Selection is appropriate for applications requiring automotive-grade reliability.

ERJ-6ENF9760V (Panasonic Electronic Components): This substitute carries automotive AEC-Q200 qualification with maximum seated height of 0.028" (0.70mm). Selection is appropriate for automotive applications with standard height tolerance requirements.

RC0805FR-07976RL (YAGEO): This substitute maintains moisture-resistant properties aligned with the original component and exhibits maximum seated height of 0.024" (0.60mm). Selection is appropriate for general-purpose applications without automotive qualification requirements.

RMCF0805FT976R (Stackpole Electronics Inc): This substitute carries automotive AEC-Q200 qualification with maximum seated height of 0.026" (0.65mm), matching the original component height specification. Selection is appropriate for automotive applications requiring height compatibility with the original design.

Frequently Asked Questions (FAQ)

Q: Can CRCW0805976RFKEA substitute for RCS2012F9760CS in non-automotive applications?

A: Yes. The CRCW0805976RFKEA meets all electrical and mechanical parameters required for substitution. Automotive AEC-Q200 qualification is an additional feature that does not restrict use in general-purpose applications.

Q: Are there height restrictions when selecting a substitute part?

A: Height variations exist among substitute parts (0.020" to 0.028" maximum seated height). PCB layout and component clearance requirements determine whether height differences are acceptable. The RMCF0805FT976R and RCS2012F9760CS share identical maximum seated height at 0.026" (0.66mm/0.65mm).

Q: Do all substitute parts maintain the same moisture resistance properties?

A: All substitute parts are classified as Moisture Sensitivity Level 1 (Unlimited), indicating equivalent moisture handling capability. The original RCS2012F9760CS specifies anti-sulfur and moisture-resistant properties; substitute parts either explicitly state moisture-resistant features or maintain MSL 1 classification, which provides equivalent protection.

Q: Is automotive AEC-Q200 qualification required for substitution?

A: No. AEC-Q200 qualification is an additional certification feature. Substitution is determined by matching core electrical specifications, tolerance, power rating, package format, temperature coefficient, operating temperature range, and compliance certifications. Three of four substitute parts carry AEC-Q200 qualification; one does not, and both are valid substitutes.

Q: Can substitute parts be used interchangeably in existing designs?

A: Yes, provided PCB footprint and height clearance accommodate the substitute part dimensions. All substitute parts use identical 0805 (2012 Metric) package format with compatible termination specifications, enabling direct PCB placement compatibility.