RCS2012F95R3CS Equivalent & Substitute Parts

Part Overview

The RCS2012F95R3CS is a 95.3 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format with 0.125W power rating. This component is classified as Active product status and features anti-sulfur and moisture-resistant construction. The part is supplied in Tape & Reel packaging and complies with ROHS3 and REACH standards.

Equivalent and substitute parts are identified based on matching electrical specifications (resistance value, tolerance, power rating, temperature coefficient), mechanical compatibility (package size, termination count, height), and environmental ratings (operating temperature range, moisture sensitivity level).

Substiute Parts

RCS2012F95R3CS

Samsung Electro-MechanicsIn Stock: 900RCS2012F95R3CS Datasheet

Current PartRFQ

CRCW080595R3FKEA

Vishay DaleIn Stock: 17551CRCW080595R3FKEA Datasheet

SimilarRFQ

ERJ-6ENF95R3V

Panasonic Electronic ComponentsIn Stock: 76825ERJ-6ENF95R3V Datasheet

SimilarRFQ

RC0805FR-0795R3L

YAGEOIn Stock: 201421RC0805FR-0795R3L Datasheet

SimilarRFQ

RMCF0805FT95R3

Stackpole Electronics IncIn Stock: 14515RMCF0805FT95R3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

Electrical Equivalence: Resistance value (95.3 Ohms), tolerance (±1%), power rating (0.125W), and temperature coefficient (±100ppm/°C) must match exactly.

Mechanical Compatibility: Package designation (0805 / 2012 Metric), number of terminations (2), and physical dimensions (0.079" L x 0.049" W) must be identical. Height variation is acceptable within manufacturing tolerances as all substitute parts remain within 0.020" to 0.028" seated height.

Environmental Compliance: Operating temperature range (-55°C ~ 155°C), Moisture Sensitivity Level (MSL 1), RoHS3 compliance, and REACH status must align with the main part specification.

Composition: All substitute parts utilize thick film construction, consistent with the main part.

All four substitute parts meet these criteria and are classified as direct equivalents for the RCS2012F95R3CS.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts are functionally equivalent to the RCS2012F95R3CS and are suitable for direct replacement in applications requiring a 95.3 Ohm ±1% 0.125W 0805 thick film chip resistor.

CRCW080595R3FKEA (Vishay Dale): Automotive AEC-Q200 rated. Lowest seated height at 0.020" (0.50mm). Suitable for space-constrained applications and automotive-grade circuit designs.

ERJ-6ENF95R3V (Panasonic Electronic Components): Automotive AEC-Q200 rated. Highest inventory availability at 76,752 pieces. Highest seated height at 0.028" (0.70mm). Suitable for high-volume procurement and automotive applications.

RC0805FR-0795R3L (YAGEO): Moisture-resistant construction matching the main part feature set. Highest inventory availability at 201,314 pieces. Mid-range seated height at 0.024" (0.60mm). Suitable for general industrial applications and high-volume sourcing.

RMCF0805FT95R3 (Stackpole Electronics Inc): Automotive AEC-Q200 rated. Seated height at 0.026" (0.65mm), matching the main part specification. Suitable for automotive applications requiring exact height matching.

All parts maintain ROHS3 compliance, REACH unaffected status, and MSL 1 rating. Selection should be based on application requirements (automotive vs. industrial), inventory availability, and physical space constraints.

Frequently Asked Questions (FAQ)

Q: Can CRCW080595R3FKEA replace RCS2012F95R3CS in any application?

A: CRCW080595R3FKEA is electrically and mechanically equivalent. The primary difference is automotive AEC-Q200 certification and lower seated height (0.020" vs. 0.026"). Substitution is valid for applications where these characteristics are compatible or beneficial.

Q: What is the significance of the seated height differences among substitute parts?

A: Seated height ranges from 0.020" to 0.028" across all parts. This variation is within typical manufacturing tolerances for 0805 package resistors. Selection should account for PCB clearance requirements and component density in the assembly.

Q: Are all substitute parts suitable for automotive applications?

A: CRCW080595R3FKEA, ERJ-6ENF95R3V, and RMCF0805FT95R3 carry AEC-Q200 automotive qualification. RC0805FR-0795R3L does not list AEC-Q200 certification. For automotive applications, select from the three AEC-Q200 qualified alternatives.

Q: Does the RCS2012F95R3CS have any unique features not shared by substitutes?

A: RCS2012F95R3CS specifies anti-sulfur construction in addition to moisture resistance. RC0805FR-0795R3L lists moisture resistance only. If anti-sulfur protection is a design requirement, verify substitute part specifications with the manufacturer or select RMCF0805FT95R3, CRCW080595R3FKEA, or ERJ-6ENF95R3V.

Q: Can these parts be used interchangeably on the same PCB assembly?

A: Yes. All parts share identical electrical specifications, package designation, and termination count. Physical height variations are within acceptable tolerances for standard PCB assembly processes. No design modifications are required for substitution.

Q: Which substitute offers the best inventory availability?

A: RC0805FR-0795R3L (YAGEO) offers the highest inventory at 201,314 pieces, followed by ERJ-6ENF95R3V (Panasonic) at 76,752 pieces. Both are suitable for high-volume production requirements.